VirtualBox

Opened 14 years ago

Last modified 10 years ago

#7736 reopened defect

SATA disks not found after reboot into linux — at Version 1

Reported by: Mike Musterd Owned by:
Component: other Version: VirtualBox 3.2.10
Keywords: Cc:
Guest type: Linux Host type: Windows

Description (last modified by Frank Mehnert)

Situation:

  • I have a IDE hdd with a linux installation on it, as well as grub.
  • I have a IDE cdrom with an image of windows XP on it.
  • I have a SATA hdd with windows XP on it, or nothing

I want to boot the linux OS, which will determine if the windows XP partition is available and has booted correctly. If this is the case, a grub-reboot is issued to boot into windows XP once, otherwise the image is restored onto the HDD. If I reboot from windows XP, the linux OS should do the above again.

On an actual machine, the procedure works without a hitch.

However after a reboot from windows XP to linux (Start | Shut Down... | Restart) the linux suddenly can't find the SATA disks. dmesg has the following lines:

[    6.166426] ata1.00: qc timeout (cmd 0xec)
[    6.166426] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[    6.516437] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   16.517619] ata1.00: qc timeout (cmd 0xec)
[   16.517619] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   16.517619] ata1: limiting SATA link speed to 1.5 Gbps
[   16.866406] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   46.866424] ata1.00: qc timeout (cmd 0xec)
[   46.866424] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   47.216399] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   47.566424] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   52.566425] ata2.00: qc timeout (cmd 0xec)
[   52.566425] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   52.916425] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   62.916398] ata2.00: qc timeout (cmd 0xec)
[   62.916398] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   62.916398] ata2: limiting SATA link speed to 1.5 Gbps
[   63.266424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   93.266437] ata2.00: qc timeout (cmd 0xec)
[   93.266437] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   93.616439] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

Attached is the full vbox.log and the full dmesg as I have it.

Change History (3)

by Mike Musterd, 14 years ago

Attachment: vbox.log added

vbox log

by Mike Musterd, 14 years ago

Attachment: dmesg.log added

dmesg log

comment:1 by Frank Mehnert, 14 years ago

Description: modified (diff)
Note: See TracTickets for help on using tickets.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy