[ 0.000000] Linux version 2.6.32.9 (machine@machine-desktop) (gcc version 4.3.4 (Buildroot 2010.02) ) #78 Thu Oct 14 07:47:40 CEST 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) [ 0.000000] BIOS-e820: 000000002fff0000 - 0000000030000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x2fff0 max_arch_pfn = 0x100000 [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002fff0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002fc00000 page 2M [ 0.000000] 002fc00000 - 002fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 2fff0000 @ 7000-c000 [ 0.000000] 767MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2fff0000 [ 0.000000] low ram: 0 - 2fff0000 [ 0.000000] node 0 low ram: 00000000 - 2fff0000 [ 0.000000] node 0 bootmap 00001000 - 00007000 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 002fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 00007deb98] TEXT DATA BSS ==> [0000100000 - 00007deb98] [ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #3 [00007df000 - 00007e2000] BRK ==> [00007df000 - 00007e2000] [ 0.000000] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #5 [0000001000 - 0000007000] BOOTMAP ==> [0000001000 - 0000007000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002fff0 [ 0.000000] On node 0 totalpages: 196495 [ 0.000000] free_area_init_node: node 0, pgdat c0374d84, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1504 pages used for memmap [ 0.000000] Normal zone: 190992 pages, LIFO batch:31 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cffc0000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194959 [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,1)/boot/bzImage ro quiet noapic consoleblank=0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 771820k/786368k available (2001k kernel code, 13992k reserved, 525k data, 4392k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) [ 0.000000] vmalloc : 0xf07f0000 - 0xfffe3000 ( 247 MB) [ 0.000000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) [ 0.000000] .init : 0xc0378000 - 0xc07c2000 (4392 kB) [ 0.000000] .data : 0xc02f46a3 - 0xc0377dc8 ( 525 kB) [ 0.000000] .text : 0xc0100000 - 0xc02f46a3 (2001 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: No reference (HPET/PMTIMER) available [ 0.000000] Marking TSC unstable due to could not calculate TSC khz [ 0.040000] Calibrating delay loop... 6330.77 BogoMIPS (lpj=31653888) [ 0.280000] Mount-cache hash table entries: 512 [ 0.280000] , L1 D cache: 32K [ 0.280000] CPU: L2 cache: 6144K [ 0.280000] using mwait in idle threads. [ 0.280000] CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 0.280000] Checking 'hlt' instruction... OK. [ 0.320000] NET: Registered protocol family 16 [ 0.320000] PCI: PCI BIOS revision 2.10 entry at 0xfc130, last bus=0 [ 0.320000] bio: create slab at 0 [ 0.320000] vgaarb: loaded [ 0.320000] SCSI subsystem initialized [ 0.320000] libata version 3.00 loaded. [ 0.320000] usbcore: registered new interface driver usbfs [ 0.320000] usbcore: registered new interface driver hub [ 0.320000] usbcore: registered new device driver usb [ 0.320000] PCI: Probing PCI hardware [ 0.320000] PCI: Probing PCI hardware (bus 00) [ 0.330000] pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f] [ 0.330000] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe0ffffff] [ 0.340000] pci 0000:00:03.0: reg 10 32bit mmio: [0xf0000000-0xf001ffff] [ 0.340000] pci 0000:00:03.0: reg 18 io port: [0xd010-0xd017] [ 0.340000] pci 0000:00:04.0: reg 10 io port: [0xd020-0xd03f] [ 0.340000] pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff] [ 0.350000] pci 0000:00:04.0: reg 18 32bit mmio pref: [0xf0800000-0xf0803fff] [ 0.350000] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff] [ 0.350000] pci 0000:00:08.0: reg 10 32bit mmio: [0xf0820000-0xf083ffff] [ 0.350000] pci 0000:00:08.0: reg 18 io port: [0xd040-0xd047] [ 0.350000] pci 0000:00:0d.0: reg 10 io port: [0xd048-0xd04f] [ 0.350000] pci 0000:00:0d.0: reg 18 io port: [0xd058-0xd05f] [ 0.350000] pci 0000:00:0d.0: reg 20 io port: [0xd070-0xd07f] [ 0.350000] pci 0000:00:0d.0: reg 24 32bit mmio: [0xf0840000-0xf0841fff] [ 0.360000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.360000] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000] [ 0.360000] Switching to clocksource pit [ 0.370088] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.370088] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.370088] NET: Registered protocol family 2 [ 0.370088] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.370088] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.376427] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.376427] TCP: Hash tables configured (established 131072 bind 65536) [ 0.376427] TCP reno registered [ 0.376427] NET: Registered protocol family 1 [ 0.376427] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.376427] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.376427] pci 0000:00:02.0: Boot video device [ 0.386422] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.396467] Slow work thread pool: Starting up [ 0.396467] Slow work thread pool: Ready [ 0.396467] NTFS driver 2.1.29 [Flags: R/O]. [ 0.396467] fuse init (API version 7.13) [ 0.396467] msgmni has been set to 1507 [ 0.396467] io scheduler noop registered (default) [ 0.396467] io scheduler anticipatory registered [ 0.396467] vga16fb: initializing [ 0.396467] vga16fb: mapped to 0xc00a0000 [ 0.396467] fb0: VGA16 VGA frame buffer device [ 0.396467] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.396467] loop: module loaded [ 0.396467] ahci 0000:00:0d.0: version 3.0 [ 0.396467] PCI: setting IRQ 5 as level-triggered [ 0.396467] ahci 0000:00:0d.0: found PCI INT A -> IRQ 5 [ 0.396467] ahci: SSS flag set, parallel bus scan disabled [ 0.396467] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.396467] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc [ 0.396467] scsi0 : ahci [ 0.396467] scsi1 : ahci [ 0.406429] ata1: SATA max UDMA/133 abar m8192@0xf0840000 port 0xf0840100 irq 5 [ 0.406429] ata2: SATA max UDMA/133 abar m8192@0xf0840000 port 0xf0840180 irq 5 [ 0.406429] ata_piix 0000:00:01.1: version 2.13 [ 0.406429] scsi2 : ata_piix [ 0.406429] scsi3 : ata_piix [ 0.406429] ata3: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 0.406429] ata4: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 0.406429] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 0.406429] Copyright (c) 1999-2006 Intel Corporation. [ 0.406429] PCI: setting IRQ 10 as level-triggered [ 0.406429] e1000 0000:00:03.0: found PCI INT A -> IRQ 10 [ 0.946400] e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) ca:fe:ba:be:0e:01 [ 0.946400] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 [ 0.946400] ata3.00: 16384 sectors, multi 128: LBA [ 0.946400] ata3.01: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 [ 0.946400] ata3.00: configured for UDMA/33 [ 0.946400] ata3.01: configured for UDMA/33 [ 1.166450] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.166450] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.166450] PCI: setting IRQ 9 as level-triggered [ 1.166450] e1000 0000:00:08.0: found PCI INT A -> IRQ 9 [ 1.166450] e1000 0000:00:08.0: sharing IRQ 9 with 0000:00:04.0 [ 1.666399] e1000: 0000:00:08.0: e1000_probe: (PCI:33MHz:32-bit) ca:fe:ba:be:01:01 [ 1.876402] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.876402] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.876402] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.876402] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 1.876402] Copyright (c) 2007-2009 Intel Corporation. [ 1.876402] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 1.876402] Copyright (c) 2009 Intel Corporation. [ 1.876402] usbmon: debugfs is not available [ 1.876402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.876402] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 [ 1.876402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.876402] ohci_hcd: block sizes: ed 64 td 64 [ 1.876402] PCI: setting IRQ 11 as level-triggered [ 1.876402] ohci_hcd 0000:00:06.0: found PCI INT A -> IRQ 11 [ 1.876402] ohci_hcd 0000:00:06.0: sharing IRQ 11 with 0000:00:02.0 [ 1.876402] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 1.876402] drivers/usb/core/inode.c: creating file 'devices' [ 1.876402] drivers/usb/core/inode.c: creating file '001' [ 1.876402] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1 [ 1.876402] ohci_hcd 0000:00:06.0: created debug files [ 1.876402] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000 [ 1.936435] ohci_hcd 0000:00:06.0: OHCI controller state [ 1.936435] ohci_hcd 0000:00:06.0: OHCI 1.0, NO legacy support registers [ 1.936435] ohci_hcd 0000:00:06.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.936435] ohci_hcd 0000:00:06.0: cmdstatus 0x00000 SOC=0 [ 1.936435] ohci_hcd 0000:00:06.0: intrstatus 0x00000000 [ 1.936435] ohci_hcd 0000:00:06.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.936435] ohci_hcd 0000:00:06.0: hcca frame #0001 [ 1.936435] ohci_hcd 0000:00:06.0: roothub.a 00000208 POTPGT=0 NPS NDP=8(8) [ 1.936435] ohci_hcd 0000:00:06.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.936435] ohci_hcd 0000:00:06.0: roothub.status 00008000 DRWE [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [0] 0x00000100 PPS [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [1] 0x00000100 PPS [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [2] 0x00000100 PPS [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [3] 0x00000100 PPS [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [4] 0x00000100 PPS [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [5] 0x00000100 PPS [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [6] 0x00000100 PPS [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [7] 0x00000100 PPS [ 1.936435] usb usb1: default language 0x0409 [ 1.936435] usb usb1: udev 1, busnum 1, minor = 0 [ 1.936435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.936435] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.936435] usb usb1: Product: OHCI Host Controller [ 1.936435] usb usb1: Manufacturer: Linux 2.6.32.9 ohci_hcd [ 1.936435] usb usb1: SerialNumber: 0000:00:06.0 [ 1.936435] usb usb1: uevent [ 1.936435] usb usb1: usb_probe_device [ 1.936435] usb usb1: configuration #1 chosen from 1 choice [ 1.936435] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.936435] usb 1-0:1.0: uevent [ 1.936435] hub 1-0:1.0: usb_probe_interface [ 1.936435] hub 1-0:1.0: usb_probe_interface - got id [ 1.936435] hub 1-0:1.0: USB hub found [ 1.936435] hub 1-0:1.0: 8 ports detected [ 1.936435] hub 1-0:1.0: standalone hub [ 1.936435] hub 1-0:1.0: no power switching (usb 1.0) [ 1.936435] hub 1-0:1.0: global over-current protection [ 1.936435] hub 1-0:1.0: power on to power good time: 0ms [ 1.936435] hub 1-0:1.0: local power source is good [ 1.936435] hub 1-0:1.0: no over-current condition exists [ 1.936435] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.936435] drivers/usb/core/inode.c: creating file '001' [ 1.936435] uhci_hcd: USB Universal Host Controller Interface driver [ 1.936435] usbcore: registered new interface driver usblp [ 1.936435] Initializing USB Mass Storage driver... [ 1.936435] usbcore: registered new interface driver usb-storage [ 1.936435] USB Mass Storage support registered. [ 1.936435] usbcore: registered new interface driver libusual [ 1.936435] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.936435] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.936435] mice: PS/2 mouse device common for all mice [ 1.936435] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.936435] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1 [ 1.936435] usbcore: registered new interface driver hiddev [ 1.936435] usbcore: registered new interface driver usbhid [ 1.936435] usbhid: v2.6:USB HID core driver [ 1.936435] TCP cubic registered [ 1.936435] NET: Registered protocol family 17 [ 1.946407] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.946407] EDD information not available. [ 2.036425] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 [ 6.166426] ata1.00: qc timeout (cmd 0xec) [ 6.166426] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 6.516437] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 16.517619] ata1.00: qc timeout (cmd 0xec) [ 16.517619] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 16.517619] ata1: limiting SATA link speed to 1.5 Gbps [ 16.866406] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 46.866424] ata1.00: qc timeout (cmd 0xec) [ 46.866424] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 47.216399] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 47.566424] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 52.566425] ata2.00: qc timeout (cmd 0xec) [ 52.566425] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 52.916425] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 62.916398] ata2.00: qc timeout (cmd 0xec) [ 62.916398] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 62.916398] ata2: limiting SATA link speed to 1.5 Gbps [ 63.266424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 93.266437] ata2.00: qc timeout (cmd 0xec) [ 93.266437] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 93.616439] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 93.616439] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5 [ 93.616439] sd 2:0:0:0: [sda] 16384 512-byte logical blocks: (8.38 MB/8.00 MiB) [ 93.616439] sd 2:0:0:0: [sda] Write Protect is off [ 93.616439] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 93.616439] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.616439] sda: sda1 [ 93.616439] scsi 2:0:1:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 [ 93.616439] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray [ 93.616439] Uniform CD-ROM driver Revision: 3.20 [ 93.616439] sd 2:0:0:0: [sda] Attached SCSI disk [ 93.616439] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 93.616439] Freeing unused kernel memory: 4392k freed [ 94.036517] UDF-fs: No partition found (1) [ 94.176548] UDF-fs: No partition found (1) [ 94.476507] UDF-fs: No partition found (1) [ 94.636450] UDF-fs: No partition found (1) [ 94.956414] UDF-fs: No partition found (1) [ 95.106424] UDF-fs: No partition found (1) [ 113.476409] CIFS VFS: Error connecting to socket. Aborting operation [ 113.536404] CIFS VFS: Error connecting to socket. Aborting operation [ 113.556405] CIFS VFS: Error connecting to socket. Aborting operation [ 113.576410] CIFS VFS: Error connecting to socket. Aborting operation [ 113.606418] CIFS VFS: Error connecting to socket. Aborting operation [ 113.626913] CIFS VFS: Error connecting to socket. Aborting operation [ 113.646900] CIFS VFS: Error connecting to socket. Aborting operation [ 113.666906] CIFS VFS: Error connecting to socket. Aborting operation [ 113.697170] CIFS VFS: Error connecting to socket. Aborting operation [ 113.716410] CIFS VFS: Error connecting to socket. Aborting operation [ 113.746404] CIFS VFS: Error connecting to socket. Aborting operation [ 113.766403] CIFS VFS: Error connecting to socket. Aborting operation [ 113.786407] CIFS VFS: Error connecting to socket. Aborting operation [ 113.816402] CIFS VFS: Error connecting to socket. Aborting operation [ 113.836403] CIFS VFS: Error connecting to socket. Aborting operation [ 113.856407] CIFS VFS: Error connecting to socket. Aborting operation [ 113.876404] CIFS VFS: Error connecting to socket. Aborting operation [ 113.906890] CIFS VFS: Error connecting to socket. Aborting operation [ 113.926902] CIFS VFS: Error connecting to socket. Aborting operation [ 113.946889] CIFS VFS: Error connecting to socket. Aborting operation [ 113.976405] CIFS VFS: Error connecting to socket. Aborting operation [ 113.996412] CIFS VFS: Error connecting to socket. Aborting operation [ 114.016408] CIFS VFS: Error connecting to socket. Aborting operation [ 114.046407] CIFS VFS: Error connecting to socket. Aborting operation [ 114.066407] CIFS VFS: Error connecting to socket. Aborting operation [ 114.086408] CIFS VFS: Error connecting to socket. Aborting operation [ 114.106416] CIFS VFS: Error connecting to socket. Aborting operation [ 114.136403] CIFS VFS: Error connecting to socket. Aborting operation [ 114.157166] CIFS VFS: Error connecting to socket. Aborting operation [ 114.176407] CIFS VFS: Error connecting to socket. Aborting operation [ 114.206934] CIFS VFS: Error connecting to socket. Aborting operation [ 114.226905] CIFS VFS: Error connecting to socket. Aborting operation [ 114.247178] CIFS VFS: Error connecting to socket. Aborting operation [ 114.276406] CIFS VFS: Error connecting to socket. Aborting operation [ 114.296408] CIFS VFS: Error connecting to socket. Aborting operation [ 114.326405] CIFS VFS: Error connecting to socket. Aborting operation [ 114.346403] CIFS VFS: Error connecting to socket. Aborting operation [ 114.376407] CIFS VFS: Error connecting to socket. Aborting operation [ 114.396407] CIFS VFS: Error connecting to socket. Aborting operation [ 114.416410] CIFS VFS: Error connecting to socket. Aborting operation