00000000 debuglog.c:269:DebugLogSetLevel() debug level=debug 00000078 configfile.l:254:DBGetReaderListDir() Parsing conf directory: /etc/reader.conf.d 00000011 configfile.l:266:DBGetReaderListDir() Skipping non regular file: . 00000002 configfile.l:266:DBGetReaderListDir() Skipping non regular file: .. 00000002 configfile.l:307:DBGetReaderList() Parsing conf file: /etc/reader.conf.d/libccidtwin 00000031 pcscdaemon.c:545:main() pcsc-lite 1.8.10 daemon ready. 00000565 hotplug_libudev.c:269:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001 00000040 hotplug_libudev.c:269:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001 00000037 hotplug_libudev.c:269:get_driver() Looking for a driver for VID: 0x08E6, PID: 0x3438, path: /dev/bus/usb/001/002 00000009 hotplug_libudev.c:269:get_driver() Looking for a driver for VID: 0x08E6, PID: 0x3438, path: /dev/bus/usb/001/002 00000002 hotplug_libudev.c:321:HPAddDevice() Adding USB device: Gemalto USB Shell Token V2 00000013 readerfactory.c:989:RFInitializeReader() Attempting startup of Gemalto USB Shell Token V2 00 00 using /usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so 00000103 readerfactory.c:874:RFBindFunctions() Loading IFD Handler 3.0 00000016 ifdhandler.c:1910:init_driver() Driver version: 1.4.17 00000084 ifdhandler.c:1927:init_driver() LogLevel: 0x0003 00000003 ifdhandler.c:1938:init_driver() DriverOptions: 0x0000 00000008 ifdhandler.c:83:CreateChannelByNameOrChannel() Lun: 0, device: usb:08e6/3438:libudev:0:/dev/bus/usb/001/002 00000008 ccid_usb.c:284:OpenUSBByName() Using: /usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist 00000064 ccid_usb.c:302:OpenUSBByName() ifdManufacturerString: Ludovic Rousseau (ludovic.rousseau@free.fr) 00000003 ccid_usb.c:303:OpenUSBByName() ifdProductString: Generic CCID driver 00000002 ccid_usb.c:304:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version. 00084964 ccid_usb.c:596:OpenUSBByName() Found Vendor/Product: 08E6/3438 (Gemalto USB Shell Token V2) 00000006 ccid_usb.c:598:OpenUSBByName() Using USB bus/device: 1/2 00000002 ccid_usb.c:650:OpenUSBByName() bNumDataRatesSupported is 0 00106404 commands.c:966:CmdEscape error on byte 10 00000159 ccid.c:223:set_gemalto_firmware_features() GET_FIRMWARE_FEATURES failed: 612, len=0 00000007 ifdhandler.c:362:IFDHGetCapabilities() tag: 0xFB3, usb:08e6/3438:libudev:0:/dev/bus/usb/001/002 (lun: 0) 00000002 readerfactory.c:332:RFAddReader() Using the reader polling thread 00000558 ifdhandler.c:362:IFDHGetCapabilities() tag: 0xFAE, usb:08e6/3438:libudev:0:/dev/bus/usb/001/002 (lun: 0) 00000005 ifdhandler.c:450:IFDHGetCapabilities() Reader supports 1 slot(s) 00000325 hotplug_libudev.c:269:get_driver() Looking for a driver for VID: 0x1D6B, PID: 0x0003, path: /dev/bus/usb/002/001 00000035 readerfactory.c:1330:RFWaitForReaderInit() Waiting init for reader: Gemalto USB Shell Token V2 00 00 00001229 ifdhandler.c:1122:IFDHPowerICC() action: PowerUp, usb:08e6/3438:libudev:0:/dev/bus/usb/001/002 (lun: 0) 00009037 readerfactory.c:1330:RFWaitForReaderInit() Waiting init for reader: Gemalto USB Shell Token V2 00 00 00010495 readerfactory.c:1330:RFWaitForReaderInit() Waiting init for reader: Gemalto USB Shell Token V2 00 00 00010526 readerfactory.c:1330:RFWaitForReaderInit() Waiting init for reader: Gemalto USB Shell Token V2 00 00 00010157 readerfactory.c:1330:RFWaitForReaderInit() Waiting init for reader: Gemalto USB Shell Token V2 00 00 00010542 readerfactory.c:1330:RFWaitForReaderInit() Waiting init for reader: Gemalto USB Shell Token V2 00 00 00010541 readerfactory.c:1330:RFWaitForReaderInit() Waiting init for reader: Gemalto USB Shell Token V2 00 00 00010510 readerfactory.c:1330:RFWaitForReaderInit() Waiting init for reader: Gemalto USB Shell Token V2 00 00 00010570 readerfactory.c:1330:RFWaitForReaderInit() Waiting init for reader: Gemalto USB Shell Token V2 00 00 00005291 eventhandler.c:266:EHStatusHandlerThread() powerState: POWER_STATE_POWERED 00000147 Card ATR: 3B 16 96 41 73 74 72 69 64 05001747 ifdhandler.c:1122:IFDHPowerICC() action: PowerDown, usb:08e6/3438:libudev:0:/dev/bus/usb/001/002 (lun: 0) 00000838 eventhandler.c:455:EHStatusHandlerThread() powerState: POWER_STATE_UNPOWERED 13386779 winscard_msg_srv.c:230:ProcessEventsServer() Common channel packet arrival 00000015 winscard_msg_srv.c:242:ProcessEventsServer() ProcessCommonChannelRequest detects: 14 00000003 pcscdaemon.c:111:SVCServiceRunLoop() A new context thread creation is requested: 14 00003773 winscard_svc.c:301:ContextThread() Thread is started: dwClientID=14, threadContext @0x115d6d0 00000015 winscard_svc.c:319:ContextThread() Received command: CMD_VERSION from client 14 00000004 winscard_svc.c:331:ContextThread() Client is protocol version 4:3 00000002 winscard_svc.c:351:ContextThread() CMD_VERSION rv=0x0 for client 14 00000387 winscard_svc.c:319:ContextThread() Received command: ESTABLISH_CONTEXT from client 14 00000010 winscard.c:193:SCardEstablishContext() Establishing Context: 0x5328035B 00000002 winscard_svc.c:412:ContextThread() ESTABLISH_CONTEXT rv=0x0 for client 14 00000381 winscard_svc.c:319:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 00000126 winscard_svc.c:319:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 00000124 winscard_svc.c:319:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 00000123 winscard_svc.c:319:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 00000858 winscard_msg_srv.c:230:ProcessEventsServer() Common channel packet arrival 00000009 winscard_msg_srv.c:242:ProcessEventsServer() ProcessCommonChannelRequest detects: 15 00000002 pcscdaemon.c:111:SVCServiceRunLoop() A new context thread creation is requested: 15 00000656 winscard_svc.c:301:ContextThread() Thread is started: dwClientID=15, threadContext @0x115ce30 00000125 winscard_svc.c:319:ContextThread() Received command: CMD_VERSION from client 15 00000115 winscard_svc.c:331:ContextThread() Client is protocol version 4:3 00000100 winscard_svc.c:351:ContextThread() CMD_VERSION rv=0x0 for client 15 00000112 winscard_svc.c:319:ContextThread() Received command: ESTABLISH_CONTEXT from client 15 00000116 winscard.c:193:SCardEstablishContext() Establishing Context: 0x439330DA 00000105 winscard_svc.c:412:ContextThread() ESTABLISH_CONTEXT rv=0x0 for client 15 00000125 winscard_svc.c:319:ContextThread() Received command: CONNECT from client 15 00000106 winscard.c:235:SCardConnect() Attempting Connect to Gemalto USB Shell Token V2 00 00 using protocol: 3 00000114 readerfactory.c:745:RFReaderInfo() RefReader() count was: 1 00000616 ifdhandler.c:1122:IFDHPowerICC() action: PowerUp, usb:08e6/3438:libudev:0:/dev/bus/usb/001/002 (lun: 0) 00087746 winscard.c:310:SCardConnect() power up complete. 00000163 Card ATR: 3B 16 96 41 73 74 72 69 64 00000081 winscard.c:330:SCardConnect() powerState: POWER_STATE_INUSE 00000093 prothandler.c:87:PHSetProtocol() Attempting PTS to T=0 00000090 ifdhandler.c:668:IFDHSetProtocolParameters() protocol T=0, usb:08e6/3438:libudev:0:/dev/bus/usb/001/002 (lun: 0) 00000119 towitoko/atr.c:341:ATR_GetDefaultProtocol() no default protocol found in ATR. Using T=0 00013238 commands.c:1520:CCID_Receive() Can't read all data (49142 out of 4 expected) 00000177 ifdhandler.c:895:IFDHSetProtocolParameters() PPS_Exchange Failed 00000115 prothandler.c:103:PHSetProtocol() PTS failed (605), using T=0 00000094 winscard.c:490:SCardConnect() UnrefReader() count was: 2 00000091 winscard_svc.c:453:ContextThread() CONNECT rv=0x80100066 for client 15 00000846 winscard_msg_srv.c:230:ProcessEventsServer() Common channel packet arrival 00000011 winscard_msg_srv.c:242:ProcessEventsServer() ProcessCommonChannelRequest detects: 16 00000002 pcscdaemon.c:111:SVCServiceRunLoop() A new context thread creation is requested: 16 00000349 winscard_svc.c:301:ContextThread() Thread is started: dwClientID=16, threadContext @0x1147d40 00000116 winscard_svc.c:319:ContextThread() Received command: CMD_VERSION from client 16 00000105 winscard_svc.c:331:ContextThread() Client is protocol version 4:3 00000102 winscard_svc.c:351:ContextThread() CMD_VERSION rv=0x0 for client 16 00000109 winscard_svc.c:319:ContextThread() Received command: ESTABLISH_CONTEXT from client 16 00000109 winscard.c:193:SCardEstablishContext() Establishing Context: 0x6837B655 00000098 winscard_svc.c:412:ContextThread() ESTABLISH_CONTEXT rv=0x0 for client 16 00000112 winscard_svc.c:319:ContextThread() Received command: CONNECT from client 16 00000105 winscard.c:235:SCardConnect() Attempting Connect to Gemalto USB Shell Token V2 00 00 using protocol: 3 00000116 readerfactory.c:745:RFReaderInfo() RefReader() count was: 1 00000092 winscard.c:330:SCardConnect() powerState: POWER_STATE_INUSE 00000092 prothandler.c:87:PHSetProtocol() Attempting PTS to T=0 00000091 ifdhandler.c:668:IFDHSetProtocolParameters() protocol T=0, usb:08e6/3438:libudev:0:/dev/bus/usb/001/002 (lun: 0) 00000119 towitoko/atr.c:341:ATR_GetDefaultProtocol() no default protocol found in ATR. Using T=0 00949597 commands.c:1477:CCID_Receive Card absent or mute 00000126 ifdhandler.c:895:IFDHSetProtocolParameters() PPS_Exchange Failed 00000004 prothandler.c:103:PHSetProtocol() PTS failed (605), using T=0 00000003 winscard.c:490:SCardConnect() UnrefReader() count was: 2 00000003 winscard_svc.c:453:ContextThread() CONNECT rv=0x80100066 for client 16 00000431 winscard_svc.c:319:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 00000028 winscard_svc.c:319:ContextThread() Received command: CMD_WAIT_READER_STATE_CHANGE from client 14 00002086 winscard_msg_srv.c:230:ProcessEventsServer() Common channel packet arrival 00000010 winscard_msg_srv.c:242:ProcessEventsServer() ProcessCommonChannelRequest detects: 17 00000003 pcscdaemon.c:111:SVCServiceRunLoop() A new context thread creation is requested: 17 00009608 winscard_svc.c:301:ContextThread() Thread is started: dwClientID=17, threadContext @0x11615d0 00000016 winscard_svc.c:319:ContextThread() Received command: CANCEL from client 17 00000004 winscard_svc.c:735:MSGSignalClient() Signal client: 14 00000002 winscard_svc.c:738:MSGSignalClient() SIGNAL rv=0x80100002 for client 14 00000033 winscard_svc.c:319:ContextThread() Received command: RELEASE_CONTEXT from client 14 00000003 winscard.c:204:SCardReleaseContext() Releasing Context: 0x5328035B 00000003 winscard_svc.c:427:ContextThread() RELEASE_CONTEXT rv=0x0 for client 14 00000023 winscard_svc.c:311:ContextThread() Client die: 14 00000009 winscard_svc.c:933:MSGCleanupClient() Thread is stopping: dwClientID=14, threadContext @0x115d6d0 00000002 winscard_svc.c:939:MSGCleanupClient() Freeing SCONTEXT @0x115d6d0 00000202 winscard_svc.c:544:ContextThread() CANCEL rv=0x0 for client 17 00000764 winscard_svc.c:311:ContextThread() Client die: 17 00000006 winscard_svc.c:933:MSGCleanupClient() Thread is stopping: dwClientID=17, threadContext @0x11615d0 00000001 winscard_svc.c:939:MSGCleanupClient() Freeing SCONTEXT @0x11615d0 00029866 winscard_svc.c:311:ContextThread() Client die: 16 00000018 winscard.c:204:SCardReleaseContext() Releasing Context: 0x6837B655 00000003 winscard_svc.c:933:MSGCleanupClient() Thread is stopping: dwClientID=16, threadContext @0x1147d40 00000002 winscard_svc.c:939:MSGCleanupClient() Freeing SCONTEXT @0x1147d40 00000067 winscard_svc.c:311:ContextThread() Client die: 15 00000005 winscard.c:204:SCardReleaseContext() Releasing Context: 0x439330DA 00000002 winscard_svc.c:933:MSGCleanupClient() Thread is stopping: dwClientID=15, threadContext @0x115ce30 00000001 winscard_svc.c:939:MSGCleanupClient() Freeing SCONTEXT @0x115ce30 25383994 pcscdaemon.c:726:signal_trap() Received signal: 15 00000008 pcscdaemon.c:732:signal_trap() Direct suicide 00000003 pcscdaemon.c:670:at_exit() cleaning /var/run/pcscd