<6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 2.6.32-504.12.2.el6.x86_64 (mockbuild@x86-027.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-9) (GCC) ) #1 SMP Sun Feb 1 12:14:02 EST 2015 <6>Command line: ro root=UUID=b76fe117-a2dc-49c7-8d3b-c715bb67262c rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=uk LANG=en_GB.UTF-8 rd_NO_MD quiet SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto rd_NO_LVM rd_NO_DM intremap=off <6>KERNEL supported cpus: <6> Intel GenuineIntel <6> AMD AuthenticAMD <6> Centaur CentaurHauls <6>BIOS-provided physical RAM map: <6> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) <6> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) <6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <6> BIOS-e820: 0000000000100000 - 00000000df62f000 (usable) <6> BIOS-e820: 00000000df62f000 - 00000000df63c000 (ACPI data) <6> BIOS-e820: 00000000df63c000 - 00000000df63d000 (usable) <6> BIOS-e820: 00000000df63d000 - 00000000e4000000 (reserved) <6> BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) <6> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) <6> BIOS-e820: 0000000100000000 - 000000101ffff000 (usable) <6>DMI 2.7 present. <4>SMBIOS version 2.7 @ 0xF4F40 <7>DMI: HP ProLiant DL360 G7, BIOS P68 05/05/2011 <7>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) <7>e820 remove range: 00000000000a0000 - 0000000000100000 (usable) <6>last_pfn = 0x101ffff max_arch_pfn = 0x400000000 <7>MTRR default type: write-back <7>MTRR fixed ranges enabled: <7> 00000-9FFFF write-back <7> A0000-BFFFF uncachable <7> C0000-FFFFF write-protect <7>MTRR variable ranges enabled: <7> 0 base 00E0000000 mask FFE0000000 uncachable <7> 1 disabled <7> 2 disabled <7> 3 disabled <7> 4 disabled <7> 5 disabled <7> 6 disabled <7> 7 disabled <7> 8 disabled <7> 9 disabled <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <6>last_pfn = 0xdf63d max_arch_pfn = 0x400000000 <7>initial memory mapped : 0 - 20000000 <6>Using GB pages for direct mapping <6>init_memory_mapping: 0000000000000000-00000000df63d000 <7> 0000000000 - 00c0000000 page 1G <7> 00c0000000 - 00df600000 page 2M <7> 00df600000 - 00df63d000 page 4k <7>kernel direct mapping tables up to df63d000 @ 8000-b000 <7>Use unified mapping for non-reserved e820 regions. <6>init_memory_mapping: 0000000100000000-000000101ffff000 <7> 0100000000 - 1000000000 page 1G <7> 1000000000 - 101fe00000 page 2M <7> 101fe00000 - 101ffff000 page 4k <7>kernel direct mapping tables up to 101ffff000 @ a000-d000 <6>RAMDISK: 36d79000 - 37fef7c9 <4>ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) <4>ACPI: XSDT 00000000df630140 000B4 (v01 HP ProLiant 00000002 Ò? 0000162E) <4>ACPI: FACP 00000000df630240 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E) <4>ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-611) <4>ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-611) <4>ACPI: DSDT 00000000df630340 020BD (v01 HP DSDT 00000001 INTL 20030228) <4>ACPI: FACS 00000000df62f100 00040 <4>ACPI: SPCR 00000000df62f140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) <4>ACPI: MCFG 00000000df62f1c0 0003C (v01 HP ProLiant 00000001 00000000) <4>ACPI: HPET 00000000df62f200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E) <4>ACPI: FFFF 00000000df62f240 00064 (v02 HP ProLiant 00000002 Ò? 0000162E) <4>ACPI: SPMI 00000000df62f2c0 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: ERST 00000000df62f300 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: APIC 00000000df62f500 0015E (v01 HP ProLiant 00000002 00000000) <4>ACPI: SRAT 00000000df62f680 00570 (v01 HP Proliant 00000001 Ò? 0000162E) <4>ACPI: FFFF 00000000df62fc00 00176 (v01 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: BERT 00000000df62fd80 00030 (v01 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: HEST 00000000df62fdc0 000BC (v01 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: DMAR 00000000df62fe80 0013C (v01 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: SSDT 00000000df632400 00125 (v03 HP CRSPCI0 00000002 HP 00000001) <4>ACPI: SSDT 00000000df632540 001CF (v03 HP riser1a 00000002 INTL 20061109) <4>ACPI: SSDT 00000000df632740 003BB (v01 HP pcc 00000001 INTL 20090625) <4>ACPI: SSDT 00000000df632b00 00377 (v01 HP pmab 00000001 INTL 20090625) <4>ACPI: SSDT 00000000df632e80 01A34 (v01 INTEL PPM RCM 00000001 INTL 20061109) <7>ACPI: Local APIC address 0xfee00000 <6>Setting APIC routing to flat. <6>SRAT: PXM 0 -> APIC 0 -> Node 0 <6>SRAT: PXM 0 -> APIC 2 -> Node 0 <6>SRAT: PXM 0 -> APIC 4 -> Node 0 <6>SRAT: PXM 0 -> APIC 16 -> Node 0 <6>SRAT: PXM 0 -> APIC 18 -> Node 0 <6>SRAT: PXM 0 -> APIC 20 -> Node 0 <6>SRAT: PXM 1 -> APIC 32 -> Node 1 <6>SRAT: PXM 1 -> APIC 34 -> Node 1 <6>SRAT: PXM 1 -> APIC 36 -> Node 1 <6>SRAT: PXM 1 -> APIC 48 -> Node 1 <6>SRAT: PXM 1 -> APIC 50 -> Node 1 <6>SRAT: PXM 1 -> APIC 52 -> Node 1 <6>SRAT: Node 0 PXM 0 0-e0000000 <6>SRAT: Node 0 PXM 0 100000000-820000000 <6>SRAT: Node 1 PXM 1 820000000-1020000000 <7>NUMA: Allocated memnodemap from c000 - c140 <7>NUMA: Using 29 for the hash shift. <6>Bootmem setup node 0 0000000000000000-0000000820000000 <6> NODE_DATA [000000000000c140 - 000000000004013f] <6> bootmap [0000000000100000 - 0000000000203fff] pages 104 <6>(9 early reservations) ==> bootmem [0000000000 - 0820000000] <6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] <6> #2 [0001000000 - 000202abe4] TEXT DATA BSS ==> [0001000000 - 000202abe4] <6> #3 [0036d79000 - 0037fef7c9] RAMDISK ==> [0036d79000 - 0037fef7c9] <6> #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] <6> #5 [000202b000 - 000202b49d] BRK ==> [000202b000 - 000202b49d] <6> #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] <6> #7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000] <6> #8 [000000c000 - 000000c140] MEMNODEMAP ==> [000000c000 - 000000c140] <6>Bootmem setup node 1 0000000820000000-000000101ffff000 <6> NODE_DATA [0000000820000040 - 000000082003403f] <6> bootmap [0000000820035000 - 0000000820134fff] pages 100 <6>(9 early reservations) ==> bootmem [0820000000 - 101ffff000] <6> #0 [0000000000 - 0000001000] BIOS data page <6> #1 [0000006000 - 0000008000] TRAMPOLINE <6> #2 [0001000000 - 000202abe4] TEXT DATA BSS <6> #3 [0036d79000 - 0037fef7c9] RAMDISK <6> #4 [000009f400 - 0000100000] BIOS reserved <6> #5 [000202b000 - 000202b49d] BRK <6> #6 [0000008000 - 000000a000] PGTABLE <6> #7 [000000a000 - 000000c000] PGTABLE <6> #8 [000000c000 - 000000c140] MEMNODEMAP <6>found SMP MP-table at [ffff8800000f4f80] f4f80 <6>Reserving 133MB of memory at 48MB for crashkernel (System RAM: 66047MB) <7> [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880028600000-ffff880036bfffff] on node 0 <4>[ffffea001c700000-ffffea001c7fffff] potential offnode page_structs <7> [ffffea000ec00000-ffffea001c7fffff] PMD -> [ffff880038000000-ffff880045bfffff] on node 0 <7> [ffffea001c800000-ffffea00387fffff] PMD -> [ffff880820200000-ffff88083c1fffff] on node 1 <4>Zone PFN ranges: <4> DMA 0x00000001 -> 0x00001000 <4> DMA32 0x00001000 -> 0x00100000 <4> Normal 0x00100000 -> 0x0101ffff <4>Movable zone start PFN for each node <4>early_node_map[5] active PFN ranges <4> 0: 0x00000001 -> 0x0000009f <4> 0: 0x00000100 -> 0x000df62f <4> 0: 0x000df63c -> 0x000df63d <4> 0: 0x00100000 -> 0x00820000 <4> 1: 0x00820000 -> 0x0101ffff <7>On node 0 totalpages: 8385998 <7> DMA zone: 56 pages used for memmap <7> DMA zone: 103 pages reserved <7> DMA zone: 3839 pages, LIFO batch:0 <7> DMA32 zone: 14280 pages used for memmap <7> DMA32 zone: 896616 pages, LIFO batch:31 <7> Normal zone: 102144 pages used for memmap <7> Normal zone: 7368960 pages, LIFO batch:31 <7>On node 1 totalpages: 8388607 <7> Normal zone: 114688 pages used for memmap <7> Normal zone: 8273919 pages, LIFO batch:31 <6>ACPI: PM-Timer IO Port: 0x908 <7>ACPI: Local APIC address 0xfee00000 <6>Setting APIC routing to flat. <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled) <6>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled) <6>ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled) <6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) <6>ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled) <6>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled) <6>ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled) <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) <6>ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled) <6>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled) <6>ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled) <6>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) <6>ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled) <6>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled) <6>ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled) <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) <6>ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled) <6>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled) <6>ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled) <6>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) <6>ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled) <6>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled) <6>ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled) <6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) <6>ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled) <6>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled) <6>ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled) <6>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) <6>ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled) <6>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled) <6>ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled) <6>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) <6>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24]) <6>IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <6>Using ACPI (MADT) for SMP configuration information <6>ACPI: HPET id: 0x8086a201 base: 0xfed00000 <6>SMP: Allowing 32 CPUs, 20 hotplug CPUs <7>nr_irqs_gsi: 48 <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 <6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 <6>PM: Registered nosave memory: 00000000df62f000 - 00000000df63c000 <6>PM: Registered nosave memory: 00000000df63d000 - 00000000e4000000 <6>PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000 <6>PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000 <6>PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000 <6>PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 <6>Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000) <6>Booting paravirtualized kernel on bare hardware <6>NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2 <6>PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90968 r8192 d23720 u131072 <6>pcpu-alloc: s90968 r8192 d23720 u131072 alloc=1*2097152 <6>pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 <6>pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 <4>Built 2 zonelists in Zone order, mobility grouping on. Total pages: 16543334 <4>Policy zone: Normal <5>Kernel command line: ro root=UUID=b76fe117-a2dc-49c7-8d3b-c715bb67262c rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=uk LANG=en_GB.UTF-8 rd_NO_MD quiet SYSFONT=latarcyrheb-sun16 rhgb crashkernel=133M@0M rd_NO_LVM rd_NO_DM intremap=off <6>PID hash table entries: 4096 (order: 3, 32768 bytes) <6>Checking aperture... <6>No AGP bridge found <6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 <6>software IO TLB at phys 0x20000000 - 0x24000000 <6>Memory: 65936452k/67633148k available (5336k kernel code, 534728k absent, 1161968k reserved, 7016k data, 1292k init) <6>Hierarchical RCU implementation. <6>NR_IRQS:33024 nr_irqs:1072 <6>Extended CMOS year: 2000 <4>Console: colour VGA+ 80x25 <6>console [tty0] enabled <6>allocated 268435456 bytes of page_cgroup <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups <7>hpet clockevent registered <4>Fast TSC calibration using PIT <4>Detected 2666.724 MHz processor. <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.44 BogoMIPS (lpj=2666724) <6>pid_max: default: 32768 minimum: 301 <6>Security Framework initialized <6>SELinux: Initializing. <7>SELinux: Starting in permissive mode <6>Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) <6>Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) <4>Mount-cache hash table entries: 256 <6>Initializing cgroup subsys ns <6>Initializing cgroup subsys cpuacct <6>Initializing cgroup subsys memory <6>Initializing cgroup subsys devices <6>Initializing cgroup subsys freezer <6>Initializing cgroup subsys net_cls <6>Initializing cgroup subsys blkio <6>Initializing cgroup subsys perf_event <6>Initializing cgroup subsys net_prio <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <6>mce: CPU supports 9 MCE banks <6>CPU0: Thermal monitoring enabled (TM1) <6>using mwait in idle threads. <6>ACPI: Core revision 20090903 <6>ftrace: converting mcount calls to 0f 1f 44 00 00 <6>ftrace: allocating 21919 entries in 86 pages <6>dmar: Host address width 39 <6>dmar: DRHD base: 0x000000e7ffe000 flags: 0x1 <6>dmar: IOMMU 0: reg_base_addr e7ffe000 ver 1:0 cap c90780106f0462 ecap f0207e <6>dmar: RMRR base: 0x000000df7fc000 end: 0x000000df7fdfff <6>dmar: RMRR base: 0x000000df7f5000 end: 0x000000df7fafff <6>dmar: RMRR base: 0x000000df63e000 end: 0x000000df63ffff <6>dmar: ATSR flags: 0x0 <6>APIC routing finalized to physical flat. <6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 <6>Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Broken BIOS detected, complain to your hardware vendor. <3>[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330) <4>Intel PMU driver. <4>CPUID marked event: 'bus cycles' unavailable <6>... version: 3 <6>... bit width: 48 <6>... generic registers: 4 <6>... value mask: 0000ffffffffffff <6>... max period: 000000007fffffff <6>... fixed-purpose events: 3 <6>... event mask: 000000070000000f <6>NMI watchdog enabled, takes one hw-pmu counter. <6>Booting Node 1, Processors #1 Ok. <6>Booting Node 0, Processors #2 Ok. <6>Booting Node 1, Processors #3 Ok. <6>Booting Node 0, Processors #4 Ok. <6>Booting Node 1, Processors #5 Ok. <6>Booting Node 0, Processors #6 Ok. <6>Booting Node 1, Processors #7 Ok. <6>Booting Node 0, Processors #8 Ok. <6>Booting Node 1, Processors #9 Ok. <6>Booting Node 0, Processors #10 Ok. <6>Booting Node 1, Processors #11 <6>Brought up 12 CPUs <6>Total of 12 processors activated (63999.88 BogoMIPS). <7>sizeof(vma)=200 bytes <7>sizeof(page)=56 bytes <7>sizeof(inode)=592 bytes <7>sizeof(dentry)=192 bytes <7>sizeof(ext3inode)=800 bytes <7>sizeof(buffer_head)=104 bytes <7>sizeof(skbuff)=232 bytes <7>sizeof(task_struct)=2656 bytes <6>devtmpfs: initialized <6>regulator: core version 0.5 <6>NET: Registered protocol family 16 <6>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it <6>ACPI: bus type pci registered <5>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 <5>PCI: MCFG area at e0000000 reserved in E820 <6>PCI: Using MMCONFIG at e0000000 - e3ffffff <6>PCI: Using configuration type 1 for base access <6>PCI: HP ProLiant DL360 detected, enabling pci=bfsort. <4>bio: create slab at 0 <7>ACPI: EC: Look up EC in DSDT <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: No dock devices found. <6>HEST: Table parsing has been initialized. <6>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-11]) <6>pci_root PNP0A08:00: host bridge window [mem 0xe7000000-0xfbffffff] <6>pci_root PNP0A08:00: host bridge window [io 0x1000-0x4fff] <6>pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] <6>pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] <6>pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff] <6>pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed03fff] <6>pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] <6>pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb] <6>pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df] <6>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] <6>PCI host bridge to bus 0000:00 <6>pci_bus 0000:00: root bus resource [mem 0xe7000000-0xfbffffff] <6>pci_bus 0000:00: root bus resource [io 0x1000-0x4fff] <6>pci_bus 0000:00: root bus resource [io 0x0000-0x03af] <6>pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] <6>pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff] <6>pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed03fff] <6>pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] <6>pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb] <6>pci_bus 0000:00: root bus resource [io 0x03c0-0x03df] <6>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] <6>pci 0000:00:00.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:00.0: PME# disabled <6>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:01.0: PME# disabled <6>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:02.0: PME# disabled <6>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:03.0: PME# disabled <6>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:04.0: PME# disabled <6>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:05.0: PME# disabled <6>pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:06.0: PME# disabled <6>pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:07.0: PME# disabled <6>pci 0000:00:08.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:08.0: PME# disabled <6>pci 0000:00:09.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:09.0: PME# disabled <6>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:0a.0: PME# disabled <6>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:1c.0: PME# disabled <6>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>pci 0000:00:1c.4: PME# disabled <7>pci 0000:00:1d.0: reg 20: [io 0x1000-0x101f] <7>pci 0000:00:1d.1: reg 20: [io 0x1020-0x103f] <7>pci 0000:00:1d.2: reg 20: [io 0x1040-0x105f] <7>pci 0000:00:1d.3: reg 20: [io 0x1060-0x107f] <7>pci 0000:00:1d.7: reg 10: [mem 0xf1bf0000-0xf1bf03ff] <6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold <6>pci 0000:00:1d.7: PME# disabled <7>pci 0000:05:00.0: reg 10: [mem 0xfbe00000-0xfbffffff 64bit] <7>pci 0000:05:00.0: reg 18: [mem 0xfbdf0000-0xfbdf0fff 64bit] <7>pci 0000:05:00.0: reg 20: [io 0x4000-0x40ff] <7>pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] <6>pci 0000:05:00.0: PME# supported from D0 <6>pci 0000:05:00.0: PME# disabled <6>pci 0000:00:01.0: PCI bridge to [bus 05-05] <7>pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] <7>pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbffffff] <6>pci 0000:00:02.0: PCI bridge to [bus 0c-0c] <6>pci 0000:00:03.0: PCI bridge to [bus 09-0b] <6>pci 0000:00:04.0: PCI bridge to [bus 0d-0d] <6>pci 0000:00:05.0: PCI bridge to [bus 0e-0e] <6>pci 0000:00:06.0: PCI bridge to [bus 0f-0f] <7>pci 0000:03:00.0: reg 10: [mem 0xf4000000-0xf5ffffff 64bit] <7>pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] <6>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold <6>pci 0000:03:00.0: PME# disabled <7>pci 0000:03:00.1: reg 10: [mem 0xf2000000-0xf3ffffff 64bit] <7>pci 0000:03:00.1: reg 30: [mem 0x00000000-0x0000ffff pref] <6>pci 0000:03:00.1: PME# supported from D0 D3hot D3cold <6>pci 0000:03:00.1: PME# disabled <6>pci 0000:00:07.0: PCI bridge to [bus 03-03] <7>pci 0000:00:07.0: bridge window [mem 0xf2000000-0xf5ffffff] <7>pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] <7>pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] <6>pci 0000:04:00.0: PME# supported from D0 D3hot D3cold <6>pci 0000:04:00.0: PME# disabled <7>pci 0000:04:00.1: reg 10: [mem 0xf6000000-0xf7ffffff 64bit] <7>pci 0000:04:00.1: reg 30: [mem 0x00000000-0x0000ffff pref] <6>pci 0000:04:00.1: PME# supported from D0 D3hot D3cold <6>pci 0000:04:00.1: PME# disabled <6>pci 0000:00:08.0: PCI bridge to [bus 04-04] <7>pci 0000:00:08.0: bridge window [mem 0xf6000000-0xf9ffffff] <6>pci 0000:00:09.0: PCI bridge to [bus 06-08] <6>pci 0000:00:0a.0: PCI bridge to [bus 10-10] <6>pci 0000:00:1c.0: PCI bridge to [bus 11-11] <7>pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff] <7>pci 0000:02:00.0: reg 14: [mem 0xf1ff0000-0xf1ff01ff] <7>pci 0000:02:00.0: reg 18: [io 0x3400-0x34ff] <7>pci 0000:02:00.2: reg 10: [io 0x3800-0x38ff] <7>pci 0000:02:00.2: reg 14: [mem 0xf1fe0000-0xf1fe00ff] <7>pci 0000:02:00.2: reg 18: [mem 0xf1e00000-0xf1efffff] <7>pci 0000:02:00.2: reg 1c: [mem 0xf1d80000-0xf1dfffff] <7>pci 0000:02:00.2: reg 20: [mem 0xf1d70000-0xf1d77fff] <7>pci 0000:02:00.2: reg 24: [mem 0xf1d60000-0xf1d67fff] <7>pci 0000:02:00.2: reg 30: [mem 0x00000000-0x0000ffff pref] <6>pci 0000:02:00.2: PME# supported from D0 D3hot D3cold <6>pci 0000:02:00.2: PME# disabled <7>pci 0000:02:00.4: reg 20: [io 0x3c00-0x3c1f] <6>pci 0000:00:1c.4: PCI bridge to [bus 02-02] <7>pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] <7>pci 0000:00:1c.4: bridge window [mem 0xf1d00000-0xf1ffffff] <7>pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref] <7>pci 0000:01:03.0: reg 14: [io 0x2000-0x20ff] <7>pci 0000:01:03.0: reg 18: [mem 0xf1cf0000-0xf1cfffff] <7>pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] <7>pci 0000:01:03.0: supports D1 D2 <6>pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] <7>pci 0000:00:1e.0: bridge window [mem 0xf1c00000-0xf1cfffff] <7>pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref] <7>pci 0000:00:1e.0: bridge window [mem 0xe7000000-0xfbffffff] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [io 0x1000-0x4fff] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed03fff] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode) <7>pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT5._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT01._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT08._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT09._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT0A._PRT] <6> pci0000:00: Requesting ACPI _OSC control (0x1d) <6>Unable to assume _OSC PCIe control. Disabling ASPM <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) <6>ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) <6>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) <6>vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none <6>vgaarb: loaded <6>vgaarb: bridge control possible 0000:01:03.0 <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>PCI: Using ACPI for IRQ routing <7>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 <7>PCI: pci_cache_line_size set to 64 bytes <6>NetLabel: Initializing <6>NetLabel: domain hash size = 128 <6>NetLabel: protocols = UNLABELED CIPSOv4 <6>NetLabel: unlabeled traffic allowed by default <6>HPET: 4 timers in total, 0 timers will be used for per-cpu timer <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 <6>hpet0: 4 comparators, 64-bit 14.318180 MHz counter <6>Switching to clocksource hpet <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <7>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) <7>pnp 00:01: [io 0x0070-0x0077] <7>pnp 00:01: [io 0x0408-0x040f] <7>pnp 00:01: [io 0x04d0-0x04d1] <7>pnp 00:01: [io 0x0020-0x003f] <7>pnp 00:01: [io 0x00a0-0x00bf] <7>pnp 00:01: [io 0x0090-0x009f] <7>pnp 00:01: [io 0x0050-0x0053] <7>pnp 00:01: [io 0x0700-0x071f] <7>pnp 00:01: [io 0x0880-0x08ff] <7>pnp 00:01: [io 0x0900-0x097f] <7>pnp 00:01: [io 0x0010-0x001f] <7>pnp 00:01: [io 0x0cd4-0x0cd7] <7>pnp 00:01: [io 0x0cd0-0x0cd3] <7>pnp 00:01: [io 0x0f50-0x0f58] <7>pnp 00:01: [io 0x00f0] <7>pnp 00:01: [io 0x0ca0-0x0ca1] <7>pnp 00:01: [io 0x0ca4-0x0ca5] <7>pnp 00:01: [mem 0xe0000000-0xe3ffffff] <7>pnp 00:01: [mem 0xfe000000-0xfebfffff] <7>pnp 00:01: [mem 0xe7ffe000-0xe7ffffff] <7>pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] <7>pnp 00:01: [io 0x02f8-0x02ff] <7>pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) <7>pnp 00:02: [io 0x0ca2-0x0ca3] <7>pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active) <7>pnp 00:03: [mem 0xfed00000-0xfed003ff] <7>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) <7>pnp 00:04: [dma 7] <7>pnp 00:04: [io 0x0000-0x000f] <7>pnp 00:04: [io 0x0080-0x008f] <7>pnp 00:04: [io 0x00c0-0x00df] <7>pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) <7>pnp 00:05: [io 0x0061] <7>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) <7>pnp 00:06: [io 0x0060] <7>pnp 00:06: [io 0x0064] <7>pnp 00:06: [irq 1] <7>pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) <7>pnp 00:07: [irq 12] <7>pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) <7>pnp 00:08: [io 0x002e-0x002f] <7>pnp 00:08: [io 0x0620-0x065f] <7>pnp 00:08: [io 0x0680-0x069f] <7>pnp 00:08: [io 0x0600-0x061f] <7>pnp 00:08: [io 0x0660-0x067f] <7>pnp 00:08: [io 0x0300-0x031f] <7>pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active) <7>pnp 00:09: [irq 4] <7>pnp 00:09: [io 0x03f8-0x03ff] <7>pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) <7>pnp 00:0a: [io 0x0070-0x0071] <7>pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active) <6>pnp: PnP ACPI: found 11 devices <6>ACPI: ACPI bus type pnp unregistered <6>system 00:01: [io 0x0408-0x040f] has been reserved <6>system 00:01: [io 0x04d0-0x04d1] has been reserved <6>system 00:01: [io 0x0700-0x071f] has been reserved <6>system 00:01: [io 0x0880-0x08ff] has been reserved <6>system 00:01: [io 0x0900-0x097f] has been reserved <6>system 00:01: [io 0x0cd4-0x0cd7] has been reserved <6>system 00:01: [io 0x0cd0-0x0cd3] has been reserved <6>system 00:01: [io 0x0f50-0x0f58] has been reserved <6>system 00:01: [io 0x0ca0-0x0ca1] has been reserved <6>system 00:01: [io 0x0ca4-0x0ca5] has been reserved <6>system 00:01: [io 0x02f8-0x02ff] has been reserved <6>system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved <6>system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved <6>system 00:01: [mem 0xe7ffe000-0xe7ffffff] could not be reserved <6>pci 0000:00:01.0: BAR 15: assigned [mem 0xe7000000-0xe70fffff pref] <6>pci 0000:00:07.0: BAR 15: assigned [mem 0xe7100000-0xe71fffff pref] <6>pci 0000:00:08.0: BAR 15: assigned [mem 0xe7200000-0xe72fffff pref] <6>pci 0000:00:1c.4: BAR 15: assigned [mem 0xe7300000-0xe73fffff pref] <6>pci 0000:05:00.0: BAR 6: assigned [mem 0xe7000000-0xe707ffff pref] <6>pci 0000:00:01.0: PCI bridge to [bus 05-05] <6>pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] <6>pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbffffff] <6>pci 0000:00:01.0: bridge window [mem 0xe7000000-0xe70fffff pref] <6>pci 0000:00:02.0: PCI bridge to [bus 0c-0c] <6>pci 0000:00:03.0: PCI bridge to [bus 09-0b] <6>pci 0000:00:04.0: PCI bridge to [bus 0d-0d] <6>pci 0000:00:05.0: PCI bridge to [bus 0e-0e] <6>pci 0000:00:06.0: PCI bridge to [bus 0f-0f] <6>pci 0000:03:00.0: BAR 6: assigned [mem 0xe7100000-0xe710ffff pref] <6>pci 0000:03:00.1: BAR 6: assigned [mem 0xe7110000-0xe711ffff pref] <6>pci 0000:00:07.0: PCI bridge to [bus 03-03] <6>pci 0000:00:07.0: bridge window [mem 0xf2000000-0xf5ffffff] <6>pci 0000:00:07.0: bridge window [mem 0xe7100000-0xe71fffff pref] <6>pci 0000:04:00.0: BAR 6: assigned [mem 0xe7200000-0xe720ffff pref] <6>pci 0000:04:00.1: BAR 6: assigned [mem 0xe7210000-0xe721ffff pref] <6>pci 0000:00:08.0: PCI bridge to [bus 04-04] <6>pci 0000:00:08.0: bridge window [mem 0xf6000000-0xf9ffffff] <6>pci 0000:00:08.0: bridge window [mem 0xe7200000-0xe72fffff pref] <6>pci 0000:00:09.0: PCI bridge to [bus 06-08] <6>pci 0000:00:0a.0: PCI bridge to [bus 10-10] <6>pci 0000:00:1c.0: PCI bridge to [bus 11-11] <6>pci 0000:02:00.2: BAR 6: assigned [mem 0xe7300000-0xe730ffff pref] <6>pci 0000:00:1c.4: PCI bridge to [bus 02-02] <6>pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] <6>pci 0000:00:1c.4: bridge window [mem 0xf1d00000-0xf1ffffff] <6>pci 0000:00:1c.4: bridge window [mem 0xe7300000-0xe73fffff pref] <6>pci 0000:01:03.0: BAR 6: assigned [mem 0xf1c00000-0xf1c1ffff pref] <6>pci 0000:00:1e.0: PCI bridge to [bus 01-01] <6>pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] <6>pci 0000:00:1e.0: bridge window [mem 0xf1c00000-0xf1cfffff] <6>pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref] <7>pci 0000:00:01.0: setting latency timer to 64 <7>pci 0000:00:02.0: setting latency timer to 64 <7>pci 0000:00:03.0: setting latency timer to 64 <7>pci 0000:00:04.0: setting latency timer to 64 <7>pci 0000:00:05.0: setting latency timer to 64 <7>pci 0000:00:06.0: setting latency timer to 64 <7>pci 0000:00:07.0: setting latency timer to 64 <7>pci 0000:00:08.0: setting latency timer to 64 <7>pci 0000:00:09.0: setting latency timer to 64 <7>pci 0000:00:0a.0: setting latency timer to 64 <7> alloc irq_desc for 16 on node -1 <7> alloc kstat_irqs on node -1 <6>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>pci 0000:00:1c.0: setting latency timer to 64 <6>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>pci 0000:00:1c.4: setting latency timer to 64 <7>pci 0000:00:1e.0: setting latency timer to 64 <7>pci_bus 0000:00: resource 4 [mem 0xe7000000-0xfbffffff] <7>pci_bus 0000:00: resource 5 [io 0x1000-0x4fff] <7>pci_bus 0000:00: resource 6 [io 0x0000-0x03af] <7>pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7] <7>pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff] <7>pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed03fff] <7>pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff] <7>pci_bus 0000:00: resource 11 [io 0x03b0-0x03bb] <7>pci_bus 0000:00: resource 12 [io 0x03c0-0x03df] <7>pci_bus 0000:00: resource 13 [mem 0x000a0000-0x000bffff] <7>pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] <7>pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbffffff] <7>pci_bus 0000:05: resource 2 [mem 0xe7000000-0xe70fffff pref] <7>pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf5ffffff] <7>pci_bus 0000:03: resource 2 [mem 0xe7100000-0xe71fffff pref] <7>pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf9ffffff] <7>pci_bus 0000:04: resource 2 [mem 0xe7200000-0xe72fffff pref] <7>pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] <7>pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf1ffffff] <7>pci_bus 0000:02: resource 2 [mem 0xe7300000-0xe73fffff pref] <7>pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] <7>pci_bus 0000:01: resource 1 [mem 0xf1c00000-0xf1cfffff] <7>pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff 64bit pref] <7>pci_bus 0000:01: resource 4 [mem 0xe7000000-0xfbffffff] <7>pci_bus 0000:01: resource 5 [io 0x1000-0x4fff] <7>pci_bus 0000:01: resource 6 [io 0x0000-0x03af] <7>pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7] <7>pci_bus 0000:01: resource 8 [io 0x0d00-0x0fff] <7>pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed03fff] <7>pci_bus 0000:01: resource 10 [mem 0xfed40000-0xfed44fff] <7>pci_bus 0000:01: resource 11 [io 0x03b0-0x03bb] <7>pci_bus 0000:01: resource 12 [io 0x03c0-0x03df] <7>pci_bus 0000:01: resource 13 [mem 0x000a0000-0x000bffff] <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) <6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes) <6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) <6>TCP: Hash tables configured (established 524288 bind 65536) <6>TCP reno registered <6>NET: Registered protocol family 1 <7> alloc irq_desc for 20 on node -1 <7> alloc kstat_irqs on node -1 <6>pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 <6>pci 0000:00:1d.0: PCI INT A disabled <7> alloc irq_desc for 23 on node -1 <7> alloc kstat_irqs on node -1 <6>pci 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23 <6>pci 0000:00:1d.1: PCI INT B disabled <7> alloc irq_desc for 22 on node -1 <7> alloc kstat_irqs on node -1 <6>pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 <6>pci 0000:00:1d.2: PCI INT C disabled <6>pci 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 <6>pci 0000:00:1d.3: PCI INT D disabled <6>pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 <6>pci 0000:00:1d.7: PCI INT A disabled <7>pci 0000:01:03.0: Boot video device <7> alloc irq_desc for 17 on node -1 <7> alloc kstat_irqs on node -1 <6>pci 0000:02:00.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <6>pci 0000:02:00.4: PCI INT B disabled <6>Trying to unpack rootfs image as initramfs... <6>Freeing initrd memory: 18905k freed <6>futex hash table entries: 8192 (order: 7, 524288 bytes) <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1427618283.508:1): initialized <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages <5>VFS: Disk quotas dquot_6.5.2 <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>msgmni has been set to 32768 <7>SELinux: Registering netfilter hooks <6>alg: No test for stdrng (krng) <4>ksign: Installing public key data <4>Loading keyring <4>- Added public key B1D46309F32C9800 <4>- User ID: Red Hat, Inc. (Kernel Module GPG key) <4>- Added public key D4A26C9CCD09BEDA <4>- User ID: Red Hat Enterprise Linux Driver Update Program <4>- Added public key CB445E0DA3EA1F65 <4>- User ID: Red Hat Enterprise Linux Driver Update Program (key 4) <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <7>pcieport 0000:00:1c.0: setting latency timer to 64 <7> alloc irq_desc for 48 on node -1 <7> alloc kstat_irqs on node -1 <7>pcieport 0000:00:1c.0: irq 48 for MSI/MSI-X <7>pcieport 0000:00:1c.4: setting latency timer to 64 <7> alloc irq_desc for 49 on node -1 <7> alloc kstat_irqs on node -1 <7>pcieport 0000:00:1c.4: irq 49 for MSI/MSI-X <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>pciehp: PCI Express Hot Plug Controller Driver version: 0.4 <6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <7>intel_idle: MWAIT substates: 0x1120 <7>intel_idle: v0.4 model 0x2C <7>intel_idle: lapic_timer_reliable_states 0xffffffff <6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 <6>ACPI: Power Button [PWRF] <7>ACPI: acpi_idle yielding to intel_idle <4>[Firmware Bug]: No valid trip found <6>thermal LNXTHERM:01: registered as thermal_zone0 <6>ACPI: Thermal Zone [THM0] (8 C) <3>ERST: Failed to get Error Log Address Range. <6>GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. <6>Non-volatile memory driver v1.3 <6>Linux agpgart interface v0.103 <6>crash memory driver: version 1.1 <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>brd: module loaded <6>loop: module loaded <6>input: Macintosh mouse button emulation as /devices/virtual/input/input1 <6>Fixed MDIO Bus: probed <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 <7>ehci_hcd 0000:00:1d.7: setting latency timer to 64 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:1d.7: debug port 1 <7>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported <6>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf1bf0000 <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.32-504.12.2.el6.x86_64 ehci_hcd <6>usb usb1: SerialNumber: 0000:00:1d.7 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 8 ports detected <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>uhci_hcd: USB Universal Host Controller Interface driver <6>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 <7>uhci_hcd 0000:00:1d.0: setting latency timer to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000 <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.32-504.12.2.el6.x86_64 uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1d.0 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23 <7>uhci_hcd 0000:00:1d.1: setting latency timer to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020 <6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.32-504.12.2.el6.x86_64 uhci_hcd <6>usb usb3: SerialNumber: 0000:00:1d.1 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 <7>uhci_hcd 0000:00:1d.2: setting latency timer to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040 <6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: UHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.32-504.12.2.el6.x86_64 uhci_hcd <6>usb usb4: SerialNumber: 0000:00:1d.2 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 <7>uhci_hcd 0000:00:1d.3: setting latency timer to 64 <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 <6>uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060 <6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb5: Product: UHCI Host Controller <6>usb usb5: Manufacturer: Linux 2.6.32-504.12.2.el6.x86_64 uhci_hcd <6>usb usb5: SerialNumber: 0000:00:1d.3 <6>usb usb5: configuration #1 chosen from 1 choice <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 2 ports detected <6>uhci_hcd 0000:02:00.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <7>uhci_hcd 0000:02:00.4: setting latency timer to 64 <6>uhci_hcd 0000:02:00.4: UHCI Host Controller <6>uhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 6 <6>uhci_hcd 0000:02:00.4: port count misdetected? forcing to 2 ports <6>uhci_hcd 0000:02:00.4: irq 17, io base 0x00003c00 <6>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb6: Product: UHCI Host Controller <6>usb usb6: Manufacturer: Linux 2.6.32-504.12.2.el6.x86_64 uhci_hcd <6>usb usb6: SerialNumber: 0000:02:00.4 <6>usb usb6: configuration #1 chosen from 1 choice <6>hub 6-0:1.0: USB hub found <6>hub 6-0:1.0: 2 ports detected <6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>rtc_cmos 00:0a: RTC can wake from S4 <6>rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 <6>rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>EFI Variables Facility v0.08 2004-May-17 <6>usbcore: registered new interface driver hiddev <6>usbcore: registered new interface driver usbhid <6>usbhid: v2.6:USB HID core driver <6>GRE over IPv4 demultiplexor driver <6>TCP cubic registered <6>Initializing XFRM netlink socket <6>NET: Registered protocol family 17 <4>registered taskstats version 1 <6>rtc_cmos 00:0a: setting system clock to 2015-03-29 08:38:05 UTC (1427618285) <6>Initalizing network drop monitor service <6>Freeing unused kernel memory: 1292k freed <6>Write protecting the kernel read-only data: 10240k <6>Freeing unused kernel memory: 788k freed <6>Freeing unused kernel memory: 1568k freed <6>dracut: dracut-004-356.el6_6.1 <6>dracut: rd_NO_LUKS: removing cryptoluks activation <6>dracut: rd_NO_LVM: removing LVM activation <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com <6>udev: starting version 147 <6>[drm] Initialized drm 1.1.0 20060810 <6>[drm] radeon kernel modesetting enabled. <6>radeon 0000:01:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <6>[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB). <6>[drm] register mmio base: 0xF1CF0000 <6>[drm] register mmio size: 65536 <6>radeon 0000:01:03.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used) <6>radeon 0000:01:03.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF <6>[drm] Detected VRAM RAM=128M, BAR=128M <6>[drm] RAM width 16bits DDR <6>[TTM] Zone kernel: Available graphics memory: 32979504 kiB <6>[TTM] Zone dma32: Available graphics memory: 2097152 kiB <6>[TTM] Initializing pool allocator <6>[TTM] Initializing DMA pool allocator <6>[drm] radeon: 64M of VRAM memory ready <6>[drm] radeon: 512M of GTT memory ready. <6>[drm] GART: num cpu pages 131072, num gpu pages 131072 <6>[drm] PCI GART of 512M enabled (table at 0x0000000037880000). <6>radeon 0000:01:03.0: WB disabled <6>radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff880037817000 <6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[drm] Driver supports precise vblank timestamp query. <6>[drm] radeon: irq initialized. <6>[drm] Loading R100 Microcode <6>radeon 0000:01:03.0: firmware: requesting radeon/R100_cp.bin <6>[drm] radeon: ring at 0x00000000C8001000 <6>[drm] ring test succeeded in 1 usecs <6>usb 1-8: new high speed USB device number 2 using ehci_hcd <6>usb 1-8: New USB device found, idVendor=0624, idProduct=0430 <6>usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=1 <6>usb 1-8: Product: AVO USB2 RIP <6>usb 1-8: Manufacturer: Avocent <6>usb 1-8: SerialNumber: 103430099AB <6>usb 1-8: configuration #1 chosen from 1 choice <6>input: Avocent AVO USB2 RIP as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input2 <6>generic-usb 0003:0624:0430.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent AVO USB2 RIP] on usb-0000:00:1d.7-8/input0 <6>input: Avocent AVO USB2 RIP as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.1/input/input3 <6>generic-usb 0003:0624:0430.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent AVO USB2 RIP] on usb-0000:00:1d.7-8/input1 <6>Refined TSC clocksource calibration: 2666.760 MHz. <6>Switching to clocksource tsc <6>[drm] ib test succeeded in 0 usecs <6>[drm] No TV DAC info found in BIOS <6>[drm] Radeon Display Connectors <6>[drm] Connector 0: <6>[drm] VGA-1 <6>[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 <6>[drm] Encoders: <6>[drm] CRT1: INTERNAL_DAC1 <6>[drm] Connector 1: <6>[drm] VGA-2 <6>[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c <6>[drm] Encoders: <6>[drm] CRT2: INTERNAL_DAC2 <6>[drm] fb mappable at 0xE8040000 <6>[drm] vram apper at 0xE8000000 <6>[drm] size 786432 <6>[drm] fb depth is 8 <6>[drm] pitch is 1024 <6>fbcon: radeondrmfb (fb0) is primary device <4>Console: switching to colour frame buffer device 128x48 <6>radeon 0000:01:03.0: fb0: radeondrmfb frame buffer device <6>radeon 0000:01:03.0: registered panic notifier <6>[drm] Initialized radeon 2.37.0 20080528 for 0000:01:03.0 on minor 0 <6>Initializing USB Mass Storage driver... <6>scsi0 : SCSI emulation for USB Mass Storage devices <7>usb-storage: device found at 2 <6>usbcore: registered new interface driver usb-storage <6>USB Mass Storage support registered. <7>usb-storage: waiting for device to settle before scanning <6>dracut: Starting plymouth daemon <6>dracut: rd_NO_DM: removing DM RAID activation <6>dracut: rd_NO_MD: removing MD RAID activation <6>HP HPSA Driver (v 3.4.4-1-RH2) <7> alloc irq_desc for 28 on node -1 <7> alloc kstat_irqs on node -1 <6>hpsa 0000:05:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 <7>hpsa 0000:05:00.0: setting latency timer to 64 <6>hpsa 0000:05:00.0: MSIX <7> alloc irq_desc for 50 on node -1 <7> alloc kstat_irqs on node -1 <7>hpsa 0000:05:00.0: irq 50 for MSI/MSI-X <7> alloc irq_desc for 51 on node -1 <7> alloc kstat_irqs on node -1 <7>hpsa 0000:05:00.0: irq 51 for MSI/MSI-X <7> alloc irq_desc for 52 on node -1 <7> alloc kstat_irqs on node -1 <7>hpsa 0000:05:00.0: irq 52 for MSI/MSI-X <7> alloc irq_desc for 53 on node -1 <7> alloc kstat_irqs on node -1 <7>hpsa 0000:05:00.0: irq 53 for MSI/MSI-X <7> alloc irq_desc for 54 on node -1 <7> alloc kstat_irqs on node -1 <7>hpsa 0000:05:00.0: irq 54 for MSI/MSI-X <7> alloc irq_desc for 55 on node -1 <7> alloc kstat_irqs on node -1 <7>hpsa 0000:05:00.0: irq 55 for MSI/MSI-X <7> alloc irq_desc for 56 on node -1 <7> alloc kstat_irqs on node -1 <7>hpsa 0000:05:00.0: irq 56 for MSI/MSI-X <7> alloc irq_desc for 57 on node -1 <7> alloc kstat_irqs on node -1 <7>hpsa 0000:05:00.0: irq 57 for MSI/MSI-X <4>hpsa 0000:05:00.0: Logical aborts not supported <6>hpsa 0000:05:00.0: hpsa0: <0x323a> at IRQ 50 using DAC <6>scsi1 : hpsa <6>hpsa 0000:05:00.0: RAID device c1b3t0l0 added. <6>hpsa 0000:05:00.0: Direct-Access device c1b0t0l0 added. <5>scsi 1:3:0:0: RAID HP P410i 5.76 PQ: 0 ANSI: 5 <5>scsi 1:0:0:0: Direct-Access HP LOGICAL VOLUME 5.76 PQ: 0 ANSI: 5 <2>STARTING CRC_T10DIF <5>sd 1:0:0:0: [sda] 1171743836 512-byte logical blocks: (599 GB/558 GiB) <5>sd 1:0:0:0: [sda] Write Protect is off <7>sd 1:0:0:0: [sda] Mode Sense: 6b 00 00 08 <5>sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 sda3 sda4 < sda5 sda6 > <5>sd 1:0:0:0: [sda] Attached SCSI disk <6>EXT4-fs (sda3): INFO: recovery required on readonly filesystem <6>EXT4-fs (sda3): write access will be enabled during recovery <6>EXT4-fs (sda3): recovery complete <6>EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: <6>dracut: Mounted root filesystem /dev/sda3 <7>usb-storage: device scan complete <5>scsi 0:0:0:0: Direct-Access KVM vmDisk 0.01 PQ: 0 ANSI: 0 <5>sd 0:0:0:0: [sdb] Attached SCSI removable disk <6>SELinux: Disabled at runtime. <7>SELinux: Unregistering netfilter hooks <5>type=1404 audit(1427618287.682:2): selinux=0 auid=4294967295 ses=4294967295 <6>dracut: <6>dracut: Switching root <6>udev: starting version 147 <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>EDAC MC: Ver: 2.1.0 Feb 1 2015 <6>hpwdt 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>hpwdt: New timer passed in is 30 seconds. <6>hpwdt 0000:02:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF), priority: LAST (default = 0/LAST). <6>hpwdt 0000:02:00.0: HP Watchdog Timer Driver: 1.3.3-rh, timer margin: 30 seconds (nowayout=0). <6>hpilo 0000:02:00.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <7>hpilo 0000:02:00.2: setting latency timer to 64 <4>ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092f conflicts with OpRegion 0x0000000000000920-0x000000000000092f (\SGPE) (20090903/utaddress-254) <6>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver <4>lpc_ich: Resource conflict(s) found affecting gpio_ich <6>bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.4 (Aug 05, 2013) <7> alloc irq_desc for 30 on node -1 <7> alloc kstat_irqs on node -1 <6>bnx2 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 <7>bnx2 0000:03:00.0: setting latency timer to 64 <6>bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw <6>bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw <6>bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 30, node addr 10:60:4b:a6:07:8c <7> alloc irq_desc for 37 on node -1 <7> alloc kstat_irqs on node -1 <6>bnx2 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37 <7>bnx2 0000:03:00.1: setting latency timer to 64 <6>bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw <6>bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw <6>bnx2 0000:03:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f2000000, IRQ 37, node addr 10:60:4b:a6:07:8e <7> alloc irq_desc for 31 on node -1 <7> alloc kstat_irqs on node -1 <6>bnx2 0000:04:00.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 <7>bnx2 0000:04:00.0: setting latency timer to 64 <6>bnx2 0000:04:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw <6>bnx2 0000:04:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw <6>bnx2 0000:04:00.0: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 31, node addr 10:60:4b:a6:07:80 <7> alloc irq_desc for 39 on node -1 <7> alloc kstat_irqs on node -1 <6>bnx2 0000:04:00.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39 <7>bnx2 0000:04:00.1: setting latency timer to 64 <6>bnx2 0000:04:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw <6>bnx2 0000:04:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw <6>bnx2 0000:04:00.1: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 39, node addr 10:60:4b:a6:07:82 <5>scsi 1:3:0:0: Attached scsi generic sg0 type 12 <5>sd 1:0:0:0: Attached scsi generic sg1 type 0 <5>sd 0:0:0:0: Attached scsi generic sg2 type 0 <6>ipmi message handler version 39.2 <6>IPMI System Interface driver. <6>ipmi_si: probing via ACPI <6>ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 <6>ipmi_si: Adding ACPI-specified kcs state machine <6>ipmi_si: probing via SMBIOS <6>ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 <6>ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface <6>ipmi_si: probing via SPMI <6>ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0 <6>ipmi_si: Adding SPMI-specified kcs state machine duplicate interface <6>ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 <6>ipmi_si 00:02: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13) <6>ipmi_si 00:02: IPMI kcs interface initialized <6>power_meter ACPI000D:00: Found ACPI power meter. <6>iTCO_vendor_support: vendor-support=0 <6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh <6>iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS <6>microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x14 <6>platform microcode: firmware: requesting intel-ucode/06-2c-02 <6>Microcode Update Driver: v2.00 , Peter Oruba <6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: <6>EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: <6>EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: <6>Adding 37748732k swap on /dev/sda2. Priority:-1 extents:1 across:37748732k <6>NET: Registered protocol family 10 <6>lo: Disabled Privacy Extensions <6>ip6_tables: (C) 2000-2006 Netfilter Core Team <4>nf_conntrack version 0.5.0 (16384 buckets, 65536 max) <6>802.1Q VLAN Support v1.8 Ben Greear <6>All bugs added by David S. Miller <6>Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) <6>bonding: bond0: setting mode to 802.3ad (4). <6>bonding: bond0: Setting MII monitoring interval to 100. <6>bonding: bond0: Setting LACP rate to fast (1). <6>bonding: bond0: setting mode to 802.3ad (4). <6>bonding: bond0: Setting MII monitoring interval to 100. <6>bonding: bond0: Setting LACP rate to fast (1). <6>ADDRCONF(NETDEV_UP): bond0: link is not ready <6>8021q: adding VLAN 0 to HW filter on device bond0 <6>bonding: bond0: setting mode to 802.3ad (4). <6>bonding: bond0: Setting MII monitoring interval to 100. <6>bonding: bond0: Setting LACP rate to fast (1). <6>bonding: bond0: Adding slave eth0. <7> alloc irq_desc for 58 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.0: irq 58 for MSI/MSI-X <7> alloc irq_desc for 59 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.0: irq 59 for MSI/MSI-X <7> alloc irq_desc for 60 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.0: irq 60 for MSI/MSI-X <7> alloc irq_desc for 61 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.0: irq 61 for MSI/MSI-X <7> alloc irq_desc for 62 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.0: irq 62 for MSI/MSI-X <7> alloc irq_desc for 63 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.0: irq 63 for MSI/MSI-X <7> alloc irq_desc for 64 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.0: irq 64 for MSI/MSI-X <7> alloc irq_desc for 65 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.0: irq 65 for MSI/MSI-X <7> alloc irq_desc for 66 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.0: irq 66 for MSI/MSI-X <6>bnx2 0000:03:00.0: eth0: using MSIX <4>bond0: mixed no checksumming and other settings. <6>bonding: bond0: enslaving eth0 as a backup interface with a down link. <6>bonding: bond0: Adding slave eth1. <7> alloc irq_desc for 67 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.1: irq 67 for MSI/MSI-X <7> alloc irq_desc for 68 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.1: irq 68 for MSI/MSI-X <7> alloc irq_desc for 69 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.1: irq 69 for MSI/MSI-X <7> alloc irq_desc for 70 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.1: irq 70 for MSI/MSI-X <7> alloc irq_desc for 71 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.1: irq 71 for MSI/MSI-X <7> alloc irq_desc for 72 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.1: irq 72 for MSI/MSI-X <7> alloc irq_desc for 73 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.1: irq 73 for MSI/MSI-X <7> alloc irq_desc for 74 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.1: irq 74 for MSI/MSI-X <7> alloc irq_desc for 75 on node -1 <7> alloc kstat_irqs on node -1 <7>bnx2 0000:03:00.1: irq 75 for MSI/MSI-X <6>bnx2 0000:03:00.1: eth1: using MSIX <4>bond0: mixed no checksumming and other settings. <6>bonding: bond0: enslaving eth1 as a backup interface with a down link. <6>ADDRCONF(NETDEV_UP): bond0: link is not ready <6>8021q: adding VLAN 0 to HW filter on device bond0 <5>type=1305 audit(1427618297.372:3): audit_pid=1617 old=0 auid=4294967295 ses=4294967295 res=1 <7>pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 2666 MHz <6>bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex <6>RPC: Registered named UNIX socket transport module. <6>RPC: Registered udp transport module. <6>RPC: Registered tcp transport module. <6>RPC: Registered tcp NFSv4.1 backchannel transport module. <6>bond0: link status definitely up for interface eth0, 1000 Mbps full duplex. <6>ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready <6>bnx2 0000:03:00.1: eth1: NIC Copper Link is Up, 1000 Mbps full duplex <6>bond0: link status definitely up for interface eth1, 1000 Mbps full duplex. <7>vboxdrv: Found 12 processor cores. <4>vboxdrv: fAsync=0 offMin=0x456 offMax=0x27543 <6>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. <7>vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a). <6>vboxpci: IOMMU not found (not compiled) <6>warning: `VBoxHeadless' uses 32-bit capabilities (legacy support in use) <6>device vboxnet0 entered promiscuous mode <7>bond0: no IPv6 routers present <7>vboxnet0: no IPv6 routers present <6>device vboxnet0 left promiscuous mode <4>vboxnetflt: 0 out of 64 packets were not sent (directed to host) <6>device vboxnet0 entered promiscuous mode <6>device vboxnet0 left promiscuous mode <4>vboxnetflt: 0 out of 121 packets were not sent (directed to host) <6>device vboxnet0 entered promiscuous mode <5>Registering the dns_resolver key type <5>Slow work thread pool: Starting up <5>Slow work thread pool: Ready <4>hpwdt: An NMI occurred, but unable to determine source. <0>Kernel panic - not syncing: An NMI occurred. Depending on your system the reason for the NMI is logged in any one of the following resources: <0>1. Integrated Management Log (IML) <0>2. OA Syslog <0>3. OA Forward Progress Log <0>4. iLO Event Log <4>Pid: 5567, comm: EMT-0 Not tainted 2.6.32-504.12.2.el6.x86_64 #1 <4>Call Trace: <4> [] ? panic+0xa7/0x16f <4> [] ? hpwdt_pretimeout+0x9f/0xcc [hpwdt] <4> [] ? notifier_call_chain+0x55/0x80 <4> [] ? atomic_notifier_call_chain+0x1a/0x20 <4> [] ? notify_die+0x2e/0x30 <4> [] ? do_nmi+0x217/0x340 <4> [] ? nmi+0x20/0x30 <4> <> [] ? VBoxHost_RTSemEventMultiWaitEx+0x10/0x20 [vboxdrv] <4> [] ? rtR0MemAllocEx+0x8a/0x250 [vboxdrv] <4> [] ? supdrvIOCtlFast+0x8a/0xa0 [vboxdrv] <4> [] ? VBoxDrvLinuxIOCtl_4_3_26+0x54/0x210 [vboxdrv] <4> [] ? vfs_ioctl+0x22/0xa0 <4> [] ? do_vfs_ioctl+0x84/0x580 <4> [] ? audit_syscall_entry+0x1cb/0x200 <4> [] ? sys_ioctl+0x81/0xa0 <4> [] ? __audit_syscall_exit+0x25e/0x290 <4> [] ? system_call_fastpath+0x16/0x1b