[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-41-generic-pae (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #90-Ubuntu SMP Tue May 22 12:48:11 UTC 2012 (Ubuntu 2.6.32-41.90-generic-pae 2.6.32.59+drm33.24) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable) [ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR variable ranges disabled: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] CPU MTRRs all blank - virtualized system. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfff0000 (usable) [ 0.000000] modified: 00000000dfff0000 - 00000000e0000000 (ACPI data) [ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] RAMDISK: 37858000 - 37fef3cc [ 0.000000] Allocated new RAMDISK: 00947000 - 010de3cc [ 0.000000] Move RAMDISK from 0000000037858000 - 0000000037fef3cb to 00947000 - 010de3cb [ 0.000000] ACPI: RSDP 000e0000 00024 (v02 VBOX ) [ 0.000000] ACPI: XSDT dfff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061) [ 0.000000] ACPI: FACP dfff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061) [ 0.000000] ACPI: DSDT dfff0480 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528) [ 0.000000] ACPI: FACS dfff0200 00040 [ 0.000000] ACPI: APIC dfff0240 0006C (v02 VBOX VBOXAPIC 00000001 ASL 00000061) [ 0.000000] ACPI: SSDT dfff02b0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3718MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00009000 - 0000ff40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000093e858] TEXT DATA BSS ==> [0000100000 - 000093e858] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [000093f000 - 0000946071] BRK ==> [000093f000 - 0000946071] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [0000947000 - 00010de3cc] NEW RAMDISK ==> [0000947000 - 00010de3cc] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c009fff0] 9fff0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfff0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048459 [ 0.000000] free_area_init_node: node 0, pgdat c07df020, node_mem_map c10e0000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7437 pages used for memmap [ 0.000000] HighMem zone: 813285 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ffc0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c3600000 s39480 r0 d21960 u524288 [ 0.000000] pcpu-alloc: s39480 r0 d21960 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1039242 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-41-generic-pae root=UUID=8594cbc3-51d4-42e9-b672-6a091124c0d8 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 23592960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:00120000) [ 0.000000] Memory: 4115380k/4718592k available (4852k kernel code, 77292k reserved, 2226k data, 680k init, 3282888k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07ea000 - 0xc0894000 ( 680 kB) [ 0.000000] .data : 0xc05bd1af - 0xc07e99c8 (2226 kB) [ 0.000000] .text : 0xc0100000 - 0xc05bd1af (4852 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: HPET/PMTIMER calibration failed. [ 0.000000] Marking TSC unstable due to could not calculate TSC khz [ 0.020000] Calibrating delay loop... 1302.52 BogoMIPS (lpj=2605056) [ 0.104000] Security Framework initialized [ 0.104000] AppArmor: AppArmor initialized [ 0.104000] Mount-cache hash table entries: 512 [ 0.104000] Initializing cgroup subsys ns [ 0.104000] Initializing cgroup subsys cpuacct [ 0.104000] Initializing cgroup subsys memory [ 0.104000] Initializing cgroup subsys devices [ 0.104000] Initializing cgroup subsys freezer [ 0.104000] Initializing cgroup subsys net_cls [ 0.104000] , L1 D cache: 32K [ 0.104000] CPU: L2 cache: 6144K [ 0.104000] CPU: Physical Processor ID: 0 [ 0.104000] CPU: Processor Core ID: 0 [ 0.104000] mce: CPU supports 0 MCE banks [ 0.104000] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.104000] Checking 'hlt' instruction... OK. [ 0.200001] ACPI: Core revision 20090903 [ 0.200001] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.200001] ftrace: allocating 22471 entries in 44 pages [ 0.204001] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.204001] ------------[ cut here ]------------ [ 0.204001] WARNING: at /build/buildd/linux-2.6.32/arch/x86/kernel/apic/apic.c:1259 setup_local_APIC+0x226/0x33b() [ 0.204001] Hardware name: VirtualBox [ 0.204001] Modules linked in: [ 0.204001] Pid: 1, comm: swapper Not tainted 2.6.32-41-generic-pae #90-Ubuntu [ 0.204001] Call Trace: [ 0.204001] [] warn_slowpath_common+0x72/0xa0 [ 0.204001] [] ? setup_local_APIC+0x226/0x33b [ 0.204001] [] ? setup_local_APIC+0x226/0x33b [ 0.204001] [] warn_slowpath_null+0x1a/0x20 [ 0.204001] [] setup_local_APIC+0x226/0x33b [ 0.204001] [] ? lapic_get_maxlvt+0x19/0x30 [ 0.204001] [] native_smp_prepare_cpus+0x167/0x203 [ 0.204001] [] ? kernel_init+0x0/0xc9 [ 0.204001] [] ? kernel_init+0x0/0xc9 [ 0.204001] [] kernel_init+0x55/0xc9 [ 0.204001] [] ? kernel_init+0x0/0xc9 [ 0.204001] [] kernel_thread_helper+0x7/0x10 [ 0.204001] ---[ end trace a7919e7f17c0a725 ]--- [ 0.212001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.248001] CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07 [ 0.248001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] ------------[ cut here ]------------ [ 0.020000] WARNING: at /build/buildd/linux-2.6.32/arch/x86/kernel/apic/apic.c:1259 setup_local_APIC+0x226/0x33b() [ 0.020000] Hardware name: VirtualBox [ 0.020000] Modules linked in: [ 0.020000] Pid: 0, comm: swapper Tainted: G W 2.6.32-41-generic-pae #90-Ubuntu [ 0.020000] Call Trace: [ 0.020000] [] warn_slowpath_common+0x72/0xa0 [ 0.020000] [] ? setup_local_APIC+0x226/0x33b [ 0.020000] [] ? setup_local_APIC+0x226/0x33b [ 0.020000] [] warn_slowpath_null+0x1a/0x20 [ 0.020000] [] setup_local_APIC+0x226/0x33b [ 0.020000] [] smp_callin+0xb4/0xeb [ 0.020000] [] start_secondary+0x34/0xc6 [ 0.020000] ---[ end trace a7919e7f17c0a726 ]--- [ 0.020000] , L1 D cache: 32K [ 0.020000] CPU: L2 cache: 6144K [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] mce: CPU supports 0 MCE banks [ 0.356001] CPU1: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07 [ 0.356001] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.020000] Initializing CPU#2 [ 0.020000] ------------[ cut here ]------------ [ 0.020000] WARNING: at /build/buildd/linux-2.6.32/arch/x86/kernel/apic/apic.c:1259 setup_local_APIC+0x226/0x33b() [ 0.020000] Hardware name: VirtualBox [ 0.020000] Modules linked in: [ 0.020000] Pid: 0, comm: swapper Tainted: G W 2.6.32-41-generic-pae #90-Ubuntu [ 0.020000] Call Trace: [ 0.020000] [] warn_slowpath_common+0x72/0xa0 [ 0.020000] [] ? setup_local_APIC+0x226/0x33b [ 0.020000] [] ? setup_local_APIC+0x226/0x33b [ 0.020000] [] warn_slowpath_null+0x1a/0x20 [ 0.020000] [] setup_local_APIC+0x226/0x33b [ 0.020000] [] smp_callin+0xb4/0xeb [ 0.020000] [] start_secondary+0x34/0xc6 [ 0.020000] ---[ end trace a7919e7f17c0a727 ]--- [ 0.020000] , L1 D cache: 32K [ 0.020000] CPU: L2 cache: 6144K [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 2 [ 0.020000] mce: CPU supports 0 MCE banks [ 0.460001] CPU2: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07 [ 0.460001] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.020000] Initializing CPU#3 [ 0.020000] ------------[ cut here ]------------ [ 0.020000] WARNING: at /build/buildd/linux-2.6.32/arch/x86/kernel/apic/apic.c:1259 setup_local_APIC+0x226/0x33b() [ 0.020000] Hardware name: VirtualBox [ 0.020000] Modules linked in: [ 0.020000] Pid: 0, comm: swapper Tainted: G W 2.6.32-41-generic-pae #90-Ubuntu [ 0.020000] Call Trace: [ 0.020000] [] warn_slowpath_common+0x72/0xa0 [ 0.020000] [] ? setup_local_APIC+0x226/0x33b [ 0.020000] [] ? setup_local_APIC+0x226/0x33b [ 0.020000] [] warn_slowpath_null+0x1a/0x20 [ 0.020000] [] setup_local_APIC+0x226/0x33b [ 0.020000] [] smp_callin+0xb4/0xeb [ 0.020000] [] start_secondary+0x34/0xc6 [ 0.020000] ---[ end trace a7919e7f17c0a728 ]--- [ 0.020000] , L1 D cache: 32K [ 0.020000] CPU: L2 cache: 6144K [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 3 [ 0.020000] mce: CPU supports 0 MCE banks [ 0.564002] CPU3: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07 [ 0.564002] Brought up 4 CPUs [ 0.564002] Total of 4 processors activated (5890.04 BogoMIPS). [ 0.568002] CPU0 attaching sched-domain: [ 0.568002] domain 0: span 0-3 level MC [ 0.568002] groups: 0 1 2 3 [ 0.568002] CPU1 attaching sched-domain: [ 0.568002] domain 0: span 0-3 level MC [ 0.568002] groups: 1 2 3 0 [ 0.568002] CPU2 attaching sched-domain: [ 0.568002] domain 0: span 0-3 level MC [ 0.568002] groups: 2 3 0 1 [ 0.568002] CPU3 attaching sched-domain: [ 0.568002] domain 0: span 0-3 level MC [ 0.568002] groups: 3 0 1 2 [ 0.572002] devtmpfs: initialized [ 0.576002] regulator: core version 0.5 [ 0.576002] Time: 17:52:19 Date: 06/21/12 [ 0.576002] NET: Registered protocol family 16 [ 0.576002] EISA bus registered [ 0.576002] ACPI: bus type pci registered [ 0.576002] Trying to unpack rootfs image as initramfs... [ 0.656002] PCI: PCI BIOS revision 2.10 entry at 0xfc040, last bus=0 [ 0.656002] PCI: Using configuration type 1 for base access [ 0.660002] bio: create slab at 0 [ 0.664002] ACPI: EC: Look up EC in DSDT [ 0.668002] ACPI: Executed 1 blocks of module-level executable AML code [ 0.676002] ACPI: Interpreter enabled [ 0.676002] ACPI: (supports S0 S5) [ 0.676002] ACPI: Using IOAPIC for interrupt routing [ 0.680002] ACPI: No dock devices found. [ 0.680002] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.684002] pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f] [ 0.692002] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe0ffffff] [ 0.700002] pci 0000:00:03.0: reg 10 32bit mmio: [0xf0000000-0xf001ffff] [ 0.700002] pci 0000:00:03.0: reg 18 io port: [0xd010-0xd017] [ 0.704002] pci 0000:00:04.0: reg 10 io port: [0xd020-0xd03f] [ 0.708002] pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff] [ 0.712002] pci 0000:00:04.0: reg 18 32bit mmio pref: [0xf0800000-0xf0803fff] [ 0.716002] pci 0000:00:05.0: reg 10 io port: [0xd100-0xd1ff] [ 0.716002] pci 0000:00:05.0: reg 14 io port: [0xd200-0xd23f] [ 0.720002] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff] [ 0.728002] pci 0000:00:0b.0: reg 10 32bit mmio: [0xf0805000-0xf0805fff] [ 0.732002] pci 0000:00:0d.0: reg 10 io port: [0xd240-0xd247] [ 0.732002] pci 0000:00:0d.0: reg 18 io port: [0xd250-0xd257] [ 0.732002] pci 0000:00:0d.0: reg 20 io port: [0xd260-0xd26f] [ 0.736002] pci 0000:00:0d.0: reg 24 32bit mmio: [0xf0806000-0xf0807fff] [ 0.740002] pci_bus 0000:00: on NUMA node 0 [ 0.740002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.756002] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11) [ 0.756002] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11) [ 0.756002] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11) [ 0.756002] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11) [ 0.756002] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.756002] vgaarb: loaded [ 0.756002] SCSI subsystem initialized [ 0.760002] libata version 3.00 loaded. [ 0.760002] usbcore: registered new interface driver usbfs [ 0.760002] usbcore: registered new interface driver hub [ 0.760002] usbcore: registered new device driver usb [ 0.760002] ACPI: WMI: Mapper loaded [ 0.760002] PCI: Using ACPI for IRQ routing [ 0.764002] NetLabel: Initializing [ 0.764002] NetLabel: domain hash size = 128 [ 0.764002] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.764002] NetLabel: unlabeled traffic allowed by default [ 0.768002] AppArmor: AppArmor Filesystem Enabled [ 0.768002] pnp: PnP ACPI init [ 0.768002] ACPI: bus type pnp registered [ 0.772002] pnp: PnP ACPI: found 5 devices [ 0.772002] ACPI: ACPI bus type pnp unregistered [ 0.772002] PnPBIOS: Disabled by ACPI PNP [ 0.808002] Switching to clocksource acpi_pm [ 0.812910] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.812910] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.812910] NET: Registered protocol family 2 [ 0.812910] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.812910] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.812910] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.812910] TCP: Hash tables configured (established 131072 bind 65536) [ 0.812910] TCP reno registered [ 0.812910] NET: Registered protocol family 1 [ 0.812910] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.812910] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.812910] pci 0000:00:02.0: Boot video device [ 0.812910] alloc irq_desc for 22 on node -1 [ 0.812910] alloc kstat_irqs on node -1 [ 0.812910] pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.812910] pci 0000:00:06.0: PCI INT A disabled [ 0.812910] alloc irq_desc for 19 on node -1 [ 0.812910] alloc kstat_irqs on node -1 [ 0.812910] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.812910] pci 0000:00:0b.0: PCI INT A disabled [ 0.812910] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.813011] cpufreq-nforce2: No nForce2 chipset. [ 0.813011] Scanning for low memory corruption every 60 seconds [ 0.813011] audit: initializing netlink socket (disabled) [ 0.813011] type=2000 audit(1340301138.808:1): initialized [ 0.841643] highmem bounce pool size: 64 pages [ 0.841643] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.849640] VFS: Disk quotas dquot_6.5.2 [ 0.849640] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.853606] fuse init (API version 7.13) [ 0.853606] msgmni has been set to 1628 [ 0.857591] alg: No test for stdrng (krng) [ 0.857591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.857591] io scheduler noop registered [ 0.857591] io scheduler anticipatory registered [ 0.857591] io scheduler deadline registered [ 0.857591] io scheduler cfq registered (default) [ 0.857591] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.857591] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.857591] ACPI: AC Adapter [AC] (on-line) [ 0.857591] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.857591] ACPI: Power Button [PWRF] [ 0.857591] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 [ 0.857591] ACPI: Sleep Button [SLPF] [ 0.857591] processor LNXCPU:00: registered as cooling_device0 [ 0.857591] processor LNXCPU:01: registered as cooling_device1 [ 0.857591] processor LNXCPU:02: registered as cooling_device2 [ 0.857591] processor LNXCPU:03: registered as cooling_device3 [ 0.865800] isapnp: Scanning for PnP cards... [ 0.864139] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.865800] ACPI: Battery Slot [BAT0] (battery present) [ 0.868138] brd: module loaded [ 0.868138] loop: module loaded [ 0.868138] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.868138] ata_piix 0000:00:01.1: version 2.13 [ 0.868138] ata_piix 0000:00:01.1: setting latency timer to 64 [ 0.873585] scsi0 : ata_piix [ 0.873585] scsi1 : ata_piix [ 0.873585] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 0.873585] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 0.873585] Fixed MDIO Bus: probed [ 0.873585] PPP generic driver version 2.4.2 [ 0.873585] tun: Universal TUN/TAP device driver, 1.6 [ 0.873585] tun: (C) 1999-2004 Max Krasnyansky [ 0.873585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.873585] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.873585] ehci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.873585] ehci_hcd 0000:00:0b.0: EHCI Host Controller [ 0.873585] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 0.873585] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0805000 [ 0.884501] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00 [ 0.884501] usb usb1: configuration #1 chosen from 1 choice [ 0.884501] hub 1-0:1.0: USB hub found [ 0.884501] hub 1-0:1.0: 8 ports detected [ 0.884501] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.884501] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.884501] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 0.884501] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 0.884501] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2 [ 0.888501] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000 [ 0.944186] usb usb2: configuration #1 chosen from 1 choice [ 0.944186] hub 2-0:1.0: USB hub found [ 0.944186] hub 2-0:1.0: 8 ports detected [ 0.948186] uhci_hcd: USB Universal Host Controller Interface driver [ 0.948186] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.952399] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.952399] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.952399] mice: PS/2 mouse device common for all mice [ 0.952399] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.952399] rtc0: alarms up to one day, 114 bytes nvram [ 0.952399] device-mapper: uevent: version 1.0.3 [ 0.952849] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.953639] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.965568] device-mapper: multipath: version 1.1.0 loaded [ 0.965568] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.965568] EISA: Probing bus 0 at eisa.0 [ 0.965568] Cannot allocate resource for EISA slot 4 [ 0.965568] EISA: Detected 0 cards. [ 0.969629] cpuidle: using governor ladder [ 0.969629] cpuidle: using governor menu [ 0.969629] TCP cubic registered [ 0.969629] NET: Registered protocol family 10 [ 0.969629] NET: Registered protocol family 17 [ 0.972621] Using IPI No-Shortcut mode [ 0.972621] PM: Resume from disk failed. [ 0.972621] registered taskstats version 1 [ 0.972621] Magic number: 0:720:896 [ 0.972621] rtc_cmos rtc_cmos: setting system clock to 2012-06-21 17:52:19 UTC (1340301139) [ 0.972621] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.972621] EDD information not available. [ 1.032842] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 [ 1.032842] ata2.00: configured for UDMA/33 [ 1.133141] Freeing initrd memory: 7772k freed [ 1.254061] isapnp: No Plug & Play device found [ 1.259872] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 [ 1.263720] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray [ 1.263720] Uniform CD-ROM driver Revision: 3.20 [ 1.263720] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.263720] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.263720] Freeing unused kernel memory: 680k freed [ 1.267515] Write protecting the kernel text: 4856k [ 1.267515] Write protecting the kernel read-only data: 1884k [ 1.324153] udev: starting version 151 [ 1.353364] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 1.425754] ahci 0000:00:0d.0: version 3.0 [ 1.425754] alloc irq_desc for 21 on node -1 [ 1.425754] alloc kstat_irqs on node -1 [ 1.425754] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.425754] ahci: SSS flag set, parallel bus scan disabled [ 1.425754] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 1.425754] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc [ 1.425754] ahci 0000:00:0d.0: setting latency timer to 64 [ 1.431820] scsi2 : ahci [ 1.431820] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21 [ 1.433679] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 1.433679] Copyright (c) 1999-2006 Intel Corporation. [ 1.433679] e1000 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.433679] e1000 0000:00:03.0: setting latency timer to 64 [ 1.603668] usb 2-1: configuration #1 chosen from 1 choice [ 1.752645] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.752645] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 [ 1.752645] ata3.00: 104857600 sectors, multi 128: LBA48 NCQ (depth 31/32) [ 1.752645] ata3.00: configured for UDMA/133 [ 1.752656] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5 [ 1.752656] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.752656] sd 2:0:0:0: [sda] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB) [ 1.756093] sd 2:0:0:0: [sda] Write Protect is off [ 1.756093] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.756093] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.756093] sda: sda1 sda2 < sda5 > [ 1.816179] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.824139] usbcore: registered new interface driver hiddev [ 1.844134] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input4 [ 1.844134] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0 [ 1.844134] usbcore: registered new interface driver usbhid [ 1.844134] usbhid: v2.6:USB HID core driver [ 2.076091] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.332145] e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 08:00:27:13:9b:00 [ 2.393207] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 12.856137] Adding 2187256k swap on /dev/sda5. Priority:-1 extents:1 across:2187256k [ 12.868144] udev: starting version 151 [ 12.937660] vga16fb: initializing [ 12.937660] vga16fb: mapped to 0xc00a0000 [ 12.937660] fb0: VGA16 VGA frame buffer device [ 13.025178] lp: driver loaded but no devices found [ 13.137604] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr [ 13.153701] alloc irq_desc for 20 on node -1 [ 13.153701] alloc kstat_irqs on node -1 [ 13.153701] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 13.161262] input: Unspecified device as /devices/virtual/input/input5 [ 13.165262] vboxguest: major 0, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000) [ 13.165262] vboxguest: Successfully loaded version 4.1.16 (interface 0x00010004) [ 13.198732] psmouse serio1: ID: 10 00 64 [ 13.221928] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 13.237139] parport_pc 00:04: reported by Plug and Play ACPI [ 13.285686] ppdev: user-space parallel port driver [ 15.081188] type=1505 audit(1340301153.608:2): operation="profile_load" pid=517 name="/sbin/dhclient3" [ 15.086466] type=1505 audit(1340301153.612:3): operation="profile_replace" pid=518 name="/sbin/dhclient3" [ 15.085124] type=1505 audit(1340301153.612:4): operation="profile_load" pid=517 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.085148] type=1505 audit(1340301153.612:5): operation="profile_load" pid=517 name="/usr/lib/connman/scripts/dhclient-script" [ 15.086928] type=1505 audit(1340301153.612:6): operation="profile_replace" pid=518 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.089955] type=1505 audit(1340301153.616:7): operation="profile_replace" pid=518 name="/usr/lib/connman/scripts/dhclient-script" [ 15.184144] Intel ICH 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 15.184144] Intel ICH 0000:00:05.0: setting latency timer to 64 [ 15.352131] RPC: Registered udp transport module. [ 15.352131] RPC: Registered tcp transport module. [ 15.352131] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.483974] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.624186] intel8x0_measure_ac97_clock: measured 53935 usecs (9876 samples) [ 15.624186] intel8x0: measured clock 183109 rejected [ 15.648537] Console: switching to colour frame buffer device 80x30 [ 15.981190] intel8x0_measure_ac97_clock: measured 56587 usecs (7680 samples) [ 15.981190] intel8x0: measured clock 135720 rejected [ 16.904358] intel8x0_measure_ac97_clock: measured 621024 usecs (35040 samples) [ 16.904358] intel8x0: clocking to 40835 [ 17.152189] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 17.237162] type=1505 audit(1340301155.764:8): operation="profile_replace" pid=791 name="/sbin/dhclient3" [ 17.237733] type=1505 audit(1340301155.764:9): operation="profile_replace" pid=791 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.237733] type=1505 audit(1340301155.764:10): operation="profile_replace" pid=791 name="/usr/lib/connman/scripts/dhclient-script" [ 17.245188] type=1505 audit(1340301155.772:11): operation="profile_load" pid=795 name="/usr/sbin/tcpdump" [ 18.437662] Linux agpgart interface v0.103 [ 18.441616] svc: failed to register lockdv1 RPC service (errno 97). [ 18.453668] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 18.464903] NFSD: starting 90-second grace period [ 18.501645] [drm] Initialized drm 1.1.0 20060810 [ 18.505200] alloc irq_desc for 18 on node -1 [ 18.505200] alloc kstat_irqs on node -1 [ 18.505200] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 18.505200] pci 0000:00:02.0: setting latency timer to 64 [ 18.505200] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0 [ 18.976236] vboxsf: Successfully loaded version 4.1.16 (interface 0x00010004) [ 28.076173] eth0: no IPv6 routers present [ 66.556341] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 66.577125] ISO 9660 Extensions: RRIP_1991A [ 227.294995] vboxsf: Successfully loaded version 4.1.18 (interface 0x00010004) [ 711.181383] VFS: busy inodes on changed media or resized disk sr0 [ 711.196643] VFS: busy inodes on changed media or resized disk sr0 [ 711.211945] VFS: busy inodes on changed media or resized disk sr0 [ 711.220125] VFS: busy inodes on changed media or resized disk sr0 [133255.968413] ata3.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen [133255.968413] ata3.00: failed command: READ FPDMA QUEUED [133255.968413] ata3.00: cmd 60/00:00:80:44:e1/01:00:05:00:00/40 tag 0 ncq 131072 in [133255.968413] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133255.968413] ata3.00: status: { DRDY } [133255.968413] ata3.00: failed command: READ FPDMA QUEUED [133255.968413] ata3.00: cmd 60/00:08:80:45:e1/01:00:05:00:00/40 tag 1 ncq 131072 in [133255.968413] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133255.968413] ata3.00: status: { DRDY } [133255.968413] ata3.00: failed command: READ FPDMA QUEUED [133255.968413] ata3.00: cmd 60/00:10:80:f0:ee/01:00:00:00:00/40 tag 2 ncq 131072 in [133255.968413] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133255.968413] ata3.00: status: { DRDY } [133255.968413] ata3.00: failed command: READ FPDMA QUEUED [133255.968413] ata3.00: cmd 60/00:18:80:f1:ee/01:00:00:00:00/40 tag 3 ncq 131072 in [133255.968413] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133255.968413] ata3.00: status: { DRDY } [133255.968413] ata3: hard resetting link [133256.289085] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [133256.289085] ata3.00: configured for UDMA/133 [133256.289085] ata3.00: device reported invalid CHS sector 0 [133256.289085] ata3.00: device reported invalid CHS sector 0 [133256.289085] ata3.00: device reported invalid CHS sector 0 [133256.289085] ata3.00: device reported invalid CHS sector 0 [133256.289085] ata3: EH complete [133286.981003] ata3.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen [133286.981003] ata3.00: failed command: READ FPDMA QUEUED [133286.981003] ata3.00: cmd 60/00:00:80:f1:ee/01:00:00:00:00/40 tag 0 ncq 131072 in [133286.981003] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133286.981003] ata3.00: status: { DRDY } [133286.981003] ata3.00: failed command: READ FPDMA QUEUED [133286.981003] ata3.00: cmd 60/00:08:80:f0:ee/01:00:00:00:00/40 tag 1 ncq 131072 in [133286.981003] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133286.981003] ata3.00: status: { DRDY } [133286.981003] ata3.00: failed command: READ FPDMA QUEUED [133286.981003] ata3.00: cmd 60/00:10:80:45:e1/01:00:05:00:00/40 tag 2 ncq 131072 in [133286.981003] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133286.981003] ata3.00: status: { DRDY } [133286.981003] ata3.00: failed command: READ FPDMA QUEUED [133286.981003] ata3.00: cmd 60/00:18:80:44:e1/01:00:05:00:00/40 tag 3 ncq 131072 in [133286.981003] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133286.981003] ata3.00: status: { DRDY } [133286.981003] ata3: hard resetting link [133287.301128] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [133287.301128] ata3.00: configured for UDMA/133 [133287.301128] ata3.00: device reported invalid CHS sector 0 [133287.301128] ata3.00: device reported invalid CHS sector 0 [133287.301128] ata3.00: device reported invalid CHS sector 0 [133287.301128] ata3.00: device reported invalid CHS sector 0 [133287.301128] ata3: EH complete [133317.980791] ata3.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen [133317.980791] ata3.00: failed command: READ FPDMA QUEUED [133317.980791] ata3.00: cmd 60/00:00:80:44:e1/01:00:05:00:00/40 tag 0 ncq 131072 in [133317.980791] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133317.980791] ata3.00: status: { DRDY } [133317.980791] ata3.00: failed command: READ FPDMA QUEUED [133317.980791] ata3.00: cmd 60/00:08:80:45:e1/01:00:05:00:00/40 tag 1 ncq 131072 in [133317.980791] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133317.980791] ata3.00: status: { DRDY } [133317.980791] ata3.00: failed command: READ FPDMA QUEUED [133317.980791] ata3.00: cmd 60/00:10:80:f0:ee/01:00:00:00:00/40 tag 2 ncq 131072 in [133317.980791] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133317.980791] ata3.00: status: { DRDY } [133317.980791] ata3.00: failed command: READ FPDMA QUEUED [133317.980791] ata3.00: cmd 60/00:18:80:f1:ee/01:00:00:00:00/40 tag 3 ncq 131072 in [133317.980791] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133317.980791] ata3.00: status: { DRDY } [133317.980791] ata3: hard resetting link [133318.300162] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [133318.300162] ata3.00: configured for UDMA/133 [133318.300162] ata3.00: device reported invalid CHS sector 0 [133318.300162] ata3.00: device reported invalid CHS sector 0 [133318.300162] ata3.00: device reported invalid CHS sector 0 [133318.300162] ata3.00: device reported invalid CHS sector 0 [133318.300162] ata3: EH complete [133348.980196] ata3.00: NCQ disabled due to excessive errors [133348.980196] ata3.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen [133348.980196] ata3.00: failed command: READ FPDMA QUEUED [133348.980196] ata3.00: cmd 60/00:00:80:f1:ee/01:00:00:00:00/40 tag 0 ncq 131072 in [133348.980196] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133348.980196] ata3.00: status: { DRDY } [133348.980196] ata3.00: failed command: READ FPDMA QUEUED [133348.980196] ata3.00: cmd 60/00:08:80:f0:ee/01:00:00:00:00/40 tag 1 ncq 131072 in [133348.980196] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133348.980196] ata3.00: status: { DRDY } [133348.980196] ata3.00: failed command: READ FPDMA QUEUED [133348.980196] ata3.00: cmd 60/00:10:80:45:e1/01:00:05:00:00/40 tag 2 ncq 131072 in [133348.980196] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133348.980196] ata3.00: status: { DRDY } [133348.980196] ata3.00: failed command: READ FPDMA QUEUED [133348.980196] ata3.00: cmd 60/00:18:80:44:e1/01:00:05:00:00/40 tag 3 ncq 131072 in [133348.980196] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [133348.980196] ata3.00: status: { DRDY } [133348.980196] ata3: hard resetting link [133349.300172] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [133349.300172] ata3.00: configured for UDMA/133 [133349.300172] ata3.00: device reported invalid CHS sector 0 [133349.300172] ata3.00: device reported invalid CHS sector 0 [133349.300172] ata3.00: device reported invalid CHS sector 0 [133349.300172] ata3.00: device reported invalid CHS sector 0 [133349.300172] ata3: EH complete [133379.982390] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133379.982390] ata3.00: failed command: READ DMA [133379.982390] ata3.00: cmd c8/00:00:80:44:e1/00:00:00:00:00/e5 tag 0 dma 131072 in [133379.982390] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133379.982390] ata3.00: status: { DRDY } [133379.982390] ata3: hard resetting link [133380.300167] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [133380.300167] ata3.00: configured for UDMA/133 [133380.300167] ata3.00: device reported invalid CHS sector 0 [133380.300167] ata3: EH complete [133410.981290] ata3: limiting SATA link speed to 1.5 Gbps [133410.981290] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133410.981290] ata3.00: failed command: READ DMA [133410.981290] ata3.00: cmd c8/00:00:80:44:e1/00:00:00:00:00/e5 tag 0 dma 131072 in [133410.981290] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133410.981290] ata3.00: status: { DRDY } [133410.981290] ata3: hard resetting link [133411.300182] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133411.300182] ata3.00: configured for UDMA/133 [133411.300182] ata3.00: device reported invalid CHS sector 0 [133411.300182] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [133411.300182] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [133411.300182] Descriptor sense data with sense descriptors (in hex): [133411.300182] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [133411.300182] 00 00 00 00 [133411.300182] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [133411.300182] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 05 e1 44 80 00 01 00 00 [133411.300182] end_request: I/O error, dev sda, sector 98649216 [133411.300182] ata3: EH complete [133440.852292] INFO: task jbd2/sda1-8:215 blocked for more than 120 seconds. [133440.852292] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133440.852292] jbd2/sda1-8 D 00068e59 0 215 2 0x00000000 [133440.852292] f6821ecc 00000046 f3492000 00068e59 00000000 c08934c0 f6e6f564 c08934c0 [133440.852292] 4481d5ef 0000792b c08934c0 c08934c0 f6e6f564 c08934c0 c08934c0 f34fc700 [133440.852292] 00000000 0000792b f6e6f2c0 f6821f58 f6f89078 f6821f4c f6821f7c c02d1fe1 [133440.852292] Call Trace: [133440.852292] [] jbd2_journal_commit_transaction+0x171/0x1030 [133440.852292] [] ? dequeue_task_fair+0x68/0x70 [133440.852292] [] ? finish_task_switch+0x43/0xc0 [133440.852292] [] ? default_spin_lock_flags+0x8/0x10 [133440.852292] [] ? lock_timer_base+0x2c/0x60 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] kjournald2+0x95/0x1c0 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] ? kjournald2+0x0/0x1c0 [133440.852292] [] kthread+0x74/0x80 [133440.852292] [] ? kthread+0x0/0x80 [133440.852292] [] kernel_thread_helper+0x7/0x10 [133440.852292] INFO: task rsyslogd:14684 blocked for more than 120 seconds. [133440.852292] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133440.852292] rsyslogd D 00000000 0 14684 1 0x00000000 [133440.852292] f2799cf4 00000082 00001000 00000000 00000000 c08934c0 f6864f24 c08934c0 [133440.852292] 12a95704 00007932 c08934c0 c08934c0 f6864f24 c08934c0 c08934c0 f7517340 [133440.852292] 12a95704 00007932 f6864c80 f42236c0 f6f89000 f42236c0 f2799d54 c02d0773 [133440.852292] Call Trace: [133440.852292] [] start_this_handle+0x1f3/0x3f0 [133440.852292] [] ? generic_write_end+0xa5/0xb0 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] jbd2_journal_start+0x98/0xd0 [133440.852292] [] ext4_journal_start_sb+0xc0/0xf0 [133440.852292] [] ? generic_getxattr+0x85/0x90 [133440.852292] [] ? generic_getxattr+0x0/0x90 [133440.852292] [] ext4_dirty_inode+0x24/0x50 [133440.852292] [] __mark_inode_dirty+0x31/0x180 [133440.852292] [] ? file_remove_suid+0x24/0x80 [133440.852292] [] file_update_time+0xb5/0x130 [133440.852292] [] __generic_file_aio_write+0x1b8/0x510 [133440.852292] [] generic_file_aio_write+0x57/0xc0 [133440.852292] [] ext4_file_write+0x41/0xd0 [133440.852292] [] do_sync_write+0xc4/0x100 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] ? futex_wake+0xec/0x110 [133440.852292] [] ? security_file_permission+0x14/0x20 [133440.852292] [] ? rw_verify_area+0x64/0xe0 [133440.852292] [] ? do_futex+0xc3/0x1f0 [133440.852292] [] vfs_write+0xa2/0x1a0 [133440.852292] [] ? sys_futex+0x72/0x120 [133440.852292] [] ? do_sync_write+0x0/0x100 [133440.852292] [] sys_write+0x42/0x70 [133440.852292] [] syscall_call+0x7/0xb [133440.852292] INFO: task flush-8:0:12366 blocked for more than 120 seconds. [133440.852292] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133440.852292] flush-8:0 D 002162ef 0 12366 2 0x00000000 [133440.852292] f25c3af4 00000046 c0356f15 002162ef 00000000 c08934c0 f2f7e8a4 c08934c0 [133440.852292] dc3c3652 0000792a c08934c0 c08934c0 f2f7e8a4 c08934c0 c08934c0 f42d6380 [133440.852292] dc15cab3 0000792a f2f7e600 f2f7e600 c37894c0 f7518550 f25c3b04 c05b6331 [133440.852292] Call Trace: [133440.852292] [] ? cfq_rq_enqueued+0x85/0x3d0 [133440.852292] [] io_schedule+0x61/0xa0 [133440.852292] [] get_request_wait+0xb4/0x170 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] __make_request+0x7f/0x3f0 [133440.852292] [] generic_make_request+0x344/0x500 [133440.852292] [] ? ext4_discard_preallocations+0x2c2/0x440 [133440.852292] [] ? ext4_journal_start_sb+0xc0/0xf0 [133440.852292] [] ? _spin_lock+0xd/0x10 [133440.852292] [] ? inode_reserved_space+0x1a/0x30 [133440.852292] [] submit_bio+0x75/0x120 [133440.852292] [] ? bio_alloc_bioset+0x2e/0xf0 [133440.852292] [] submit_bh+0xf6/0x130 [133440.852292] [] __block_write_full_page+0x20b/0x3b0 [133440.852292] [] ? noalloc_get_block_write+0x0/0x80 [133440.852292] [] block_write_full_page_endio+0x11a/0x130 [133440.852292] [] ? end_buffer_async_write+0x0/0x140 [133440.852292] [] ? noalloc_get_block_write+0x0/0x80 [133440.852292] [] block_write_full_page+0x17/0x20 [133440.852292] [] ? end_buffer_async_write+0x0/0x140 [133440.852292] [] ext4_writepage+0xfc/0x2b0 [133440.852292] [] ? ext4_bh_delay_or_unwritten+0x0/0x30 [133440.852292] [] mpage_da_submit_io+0xd6/0x130 [133440.852292] [] ? ext4_meta_trans_blocks+0xb7/0xd0 [133440.852292] [] ext4_da_writepages+0x450/0x580 [133440.852292] [] ? balance_tasks+0x88/0x110 [133440.852292] [] do_writepages+0x1c/0x40 [133440.852292] [] writeback_single_inode+0xd5/0x380 [133440.852292] [] writeback_sb_inodes+0x149/0x230 [133440.852292] [] writeback_inodes_wb+0x8a/0x160 [133440.852292] [] wb_writeback+0x1e3/0x230 [133440.852292] [] wb_do_writeback+0x87/0x140 [133440.852292] [] bdi_writeback_task+0x3b/0xb0 [133440.852292] [] ? bdi_start_fn+0x0/0xc0 [133440.852292] [] bdi_start_fn+0x5d/0xc0 [133440.852292] [] ? bdi_start_fn+0x0/0xc0 [133440.852292] [] kthread+0x74/0x80 [133440.852292] [] ? kthread+0x0/0x80 [133440.852292] [] kernel_thread_helper+0x7/0x10 [133440.852292] INFO: task pseudo:14506 blocked for more than 120 seconds. [133440.852292] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133440.852292] pseudo D 00007f27 0 14506 1 0x00000000 [133440.852292] f2705cf4 00200086 f26a8000 00007f27 00000000 c08934c0 f6864264 c08934c0 [133440.852292] 336c0734 0000792c c08934c0 c08934c0 f6864264 c08934c0 c08934c0 f42d68c0 [133440.852292] 00000002 0000792c f6863fc0 f42236c0 f6f89000 f42236c0 f2705d54 c02d0773 [133440.852292] Call Trace: [133440.852292] [] start_this_handle+0x1f3/0x3f0 [133440.852292] [] ? enqueue_task_fair+0x51/0xa0 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] jbd2_journal_start+0x98/0xd0 [133440.852292] [] ext4_journal_start_sb+0xc0/0xf0 [133440.852292] [] ? generic_getxattr+0x85/0x90 [133440.852292] [] ? generic_getxattr+0x0/0x90 [133440.852292] [] ext4_dirty_inode+0x24/0x50 [133440.852292] [] __mark_inode_dirty+0x31/0x180 [133440.852292] [] ? file_remove_suid+0x24/0x80 [133440.852292] [] file_update_time+0xb5/0x130 [133440.852292] [] __generic_file_aio_write+0x1b8/0x510 [133440.852292] [] generic_file_aio_write+0x57/0xc0 [133440.852292] [] ext4_file_write+0x41/0xd0 [133440.852292] [] do_sync_write+0xc4/0x100 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] ? security_file_permission+0x14/0x20 [133440.852292] [] ? rw_verify_area+0x64/0xe0 [133440.852292] [] vfs_write+0xa2/0x1a0 [133440.852292] [] ? copy_to_user+0x39/0x130 [133440.852292] [] ? do_sync_write+0x0/0x100 [133440.852292] [] sys_write+0x42/0x70 [133440.852292] [] syscall_call+0x7/0xb [133440.852292] INFO: task pseudo:14540 blocked for more than 120 seconds. [133440.852292] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133440.852292] pseudo D 00000442 0 14540 1 0x00000000 [133440.852292] f271fcf4 00200082 f3492000 00000442 00000000 c08934c0 f6e6e8a4 c08934c0 [133440.852292] 221bdb92 0000792d c08934c0 c08934c0 f6e6e8a4 c08934c0 c08934c0 f2f42a80 [133440.852292] 00000001 0000792d f6e6e600 f42236c0 f6f89000 f42236c0 f271fd54 c02d0773 [133440.852292] Call Trace: [133440.852292] [] start_this_handle+0x1f3/0x3f0 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] jbd2_journal_start+0x98/0xd0 [133440.852292] [] ext4_journal_start_sb+0xc0/0xf0 [133440.852292] [] ? generic_getxattr+0x85/0x90 [133440.852292] [] ? generic_getxattr+0x0/0x90 [133440.852292] [] ext4_dirty_inode+0x24/0x50 [133440.852292] [] __mark_inode_dirty+0x31/0x180 [133440.852292] [] ? file_remove_suid+0x24/0x80 [133440.852292] [] file_update_time+0xb5/0x130 [133440.852292] [] __generic_file_aio_write+0x1b8/0x510 [133440.852292] [] generic_file_aio_write+0x57/0xc0 [133440.852292] [] ext4_file_write+0x41/0xd0 [133440.852292] [] do_sync_write+0xc4/0x100 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] ? security_file_permission+0x14/0x20 [133440.852292] [] ? rw_verify_area+0x64/0xe0 [133440.852292] [] vfs_write+0xa2/0x1a0 [133440.852292] [] ? copy_to_user+0x39/0x130 [133440.852292] [] ? do_sync_write+0x0/0x100 [133440.852292] [] sys_write+0x42/0x70 [133440.852292] [] syscall_call+0x7/0xb [133440.852292] INFO: task pseudo:14581 blocked for more than 120 seconds. [133440.852292] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133440.852292] pseudo D 00005136 0 14581 1 0x00000000 [133440.852292] f24e1cf4 00200086 f24e1cb4 00005136 00000000 c08934c0 f43502a4 c08934c0 [133440.852292] 88107cab 0000792e c08934c0 c08934c0 f43502a4 c08934c0 c08934c0 f2f43c00 [133440.852292] 88107cab 0000792e f4350000 f42236c0 f6f89000 f42236c0 f24e1d54 c02d0773 [133440.852292] Call Trace: [133440.852292] [] start_this_handle+0x1f3/0x3f0 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] jbd2_journal_start+0x98/0xd0 [133440.852292] [] ext4_journal_start_sb+0xc0/0xf0 [133440.852292] [] ? generic_getxattr+0x85/0x90 [133440.852292] [] ? generic_getxattr+0x0/0x90 [133440.852292] [] ext4_dirty_inode+0x24/0x50 [133440.852292] [] __mark_inode_dirty+0x31/0x180 [133440.852292] [] ? file_remove_suid+0x24/0x80 [133440.852292] [] file_update_time+0xb5/0x130 [133440.852292] [] __generic_file_aio_write+0x1b8/0x510 [133440.852292] [] generic_file_aio_write+0x57/0xc0 [133440.852292] [] ext4_file_write+0x41/0xd0 [133440.852292] [] do_sync_write+0xc4/0x100 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] ? security_file_permission+0x14/0x20 [133440.852292] [] ? rw_verify_area+0x64/0xe0 [133440.852292] [] vfs_write+0xa2/0x1a0 [133440.852292] [] ? copy_to_user+0x39/0x130 [133440.852292] [] ? do_sync_write+0x0/0x100 [133440.852292] [] sys_write+0x42/0x70 [133440.852292] [] syscall_call+0x7/0xb [133440.852292] INFO: task pseudo:14610 blocked for more than 120 seconds. [133440.852292] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133440.852292] pseudo D 000021d5 0 14610 1 0x00000000 [133440.852292] f27e9cf4 00200086 f27e9cb4 000021d5 00000000 c08934c0 f6d27564 c08934c0 [133440.852292] 76d569ee 0000792f c08934c0 c08934c0 f6d27564 c08934c0 c08934c0 f241ddc0 [133440.852292] 76d569ee 0000792f f6d272c0 f42236c0 f6f89000 f42236c0 f27e9d54 c02d0773 [133440.852292] Call Trace: [133440.852292] [] start_this_handle+0x1f3/0x3f0 [133440.852292] [] ? cpumask_next_and+0x1f/0x40 [133440.852292] [] ? find_busiest_group+0x1f3/0x950 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] jbd2_journal_start+0x98/0xd0 [133440.852292] [] ext4_journal_start_sb+0xc0/0xf0 [133440.852292] [] ? generic_getxattr+0x85/0x90 [133440.852292] [] ? generic_getxattr+0x0/0x90 [133440.852292] [] ext4_dirty_inode+0x24/0x50 [133440.852292] [] __mark_inode_dirty+0x31/0x180 [133440.852292] [] ? file_remove_suid+0x24/0x80 [133440.852292] [] file_update_time+0xb5/0x130 [133440.852292] [] ? load_balance+0x94/0x3b0 [133440.852292] [] __generic_file_aio_write+0x1b8/0x510 [133440.852292] [] generic_file_aio_write+0x57/0xc0 [133440.852292] [] ext4_file_write+0x41/0xd0 [133440.852292] [] do_sync_write+0xc4/0x100 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] ? security_file_permission+0x14/0x20 [133440.852292] [] ? rw_verify_area+0x64/0xe0 [133440.852292] [] vfs_write+0xa2/0x1a0 [133440.852292] [] ? copy_to_user+0x39/0x130 [133440.852292] [] ? do_sync_write+0x0/0x100 [133440.852292] [] sys_write+0x42/0x70 [133440.852292] [] syscall_call+0x7/0xb [133440.852292] INFO: task pseudo:14642 blocked for more than 120 seconds. [133440.852292] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133440.852292] pseudo D 0000b6e1 0 14642 1 0x00000000 [133440.852292] f3493cf4 00200086 f3493cb4 0000b6e1 00000000 c08934c0 f68602a4 c08934c0 [133440.852292] 6575e7b7 00007930 c08934c0 c08934c0 f68602a4 c08934c0 c08934c0 f42d76c0 [133440.852292] 6575e7b7 00007930 f6860000 f42236c0 f6f89000 f42236c0 f3493d54 c02d0773 [133440.852292] Call Trace: [133440.852292] [] start_this_handle+0x1f3/0x3f0 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] jbd2_journal_start+0x98/0xd0 [133440.852292] [] ext4_journal_start_sb+0xc0/0xf0 [133440.852292] [] ? generic_getxattr+0x85/0x90 [133440.852292] [] ? generic_getxattr+0x0/0x90 [133440.852292] [] ext4_dirty_inode+0x24/0x50 [133440.852292] [] __mark_inode_dirty+0x31/0x180 [133440.852292] [] ? file_remove_suid+0x24/0x80 [133440.852292] [] file_update_time+0xb5/0x130 [133440.852292] [] __generic_file_aio_write+0x1b8/0x510 [133440.852292] [] generic_file_aio_write+0x57/0xc0 [133440.852292] [] ext4_file_write+0x41/0xd0 [133440.852292] [] do_sync_write+0xc4/0x100 [133440.852292] [] ? run_rebalance_domains+0x39/0xc0 [133440.852292] [] ? autoremove_wake_function+0x0/0x50 [133440.852292] [] ? security_file_permission+0x14/0x20 [133440.852292] [] ? rw_verify_area+0x64/0xe0 [133440.852292] [] vfs_write+0xa2/0x1a0 [133440.852292] [] ? copy_to_user+0x39/0x130 [133440.852292] [] ? do_sync_write+0x0/0x100 [133440.852292] [] sys_write+0x42/0x70 [133440.852292] [] syscall_call+0x7/0xb [133441.980619] ata3.00: limiting speed to UDMA/100:PIO4 [133441.980619] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133441.980619] ata3.00: failed command: READ DMA [133441.980619] ata3.00: cmd c8/00:00:80:45:e1/00:00:00:00:00/e5 tag 0 dma 131072 in [133441.980619] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133441.980619] ata3.00: status: { DRDY } [133441.980619] ata3: hard resetting link [133442.300173] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133442.300173] ata3.00: configured for UDMA/100 [133442.300173] ata3.00: device reported invalid CHS sector 0 [133442.300173] ata3: EH complete [133472.980619] ata3.00: limiting speed to UDMA/33:PIO4 [133472.980619] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133472.980619] ata3.00: failed command: READ DMA [133472.980619] ata3.00: cmd c8/00:00:80:45:e1/00:00:00:00:00/e5 tag 0 dma 131072 in [133472.980619] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133472.980619] ata3.00: status: { DRDY } [133472.980619] ata3: hard resetting link [133473.300173] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133473.300173] ata3.00: configured for UDMA/33 [133473.300173] ata3.00: device reported invalid CHS sector 0 [133473.300173] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [133473.300173] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [133473.300173] Descriptor sense data with sense descriptors (in hex): [133473.300173] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [133473.300173] 00 00 00 00 [133473.300173] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [133473.300173] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 05 e1 45 80 00 01 00 00 [133473.300173] end_request: I/O error, dev sda, sector 98649472 [133473.300173] ata3: EH complete [133503.980389] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133503.980389] ata3.00: failed command: READ DMA [133503.980389] ata3.00: cmd c8/00:00:80:f0:ee/00:00:00:00:00/e0 tag 0 dma 131072 in [133503.980389] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133503.980389] ata3.00: status: { DRDY } [133503.980389] ata3: hard resetting link [133504.300174] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133504.300174] ata3.00: configured for UDMA/33 [133504.300174] ata3.00: device reported invalid CHS sector 0 [133504.300174] ata3: EH complete [133534.980255] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133534.980255] ata3.00: failed command: READ DMA [133534.980255] ata3.00: cmd c8/00:00:80:f0:ee/00:00:00:00:00/e0 tag 0 dma 131072 in [133534.980255] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133534.980255] ata3.00: status: { DRDY } [133534.980255] ata3: hard resetting link [133535.300178] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133535.300178] ata3.00: configured for UDMA/33 [133535.300178] ata3.00: device reported invalid CHS sector 0 [133535.300178] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [133535.300178] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [133535.300178] Descriptor sense data with sense descriptors (in hex): [133535.300178] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [133535.300178] 00 00 00 00 [133535.300178] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [133535.300178] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 00 ee f0 80 00 01 00 00 [133535.300178] end_request: I/O error, dev sda, sector 15659136 [133535.300178] ata3: EH complete [133560.853282] INFO: task jbd2/sda1-8:215 blocked for more than 120 seconds. [133560.853282] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133560.853282] jbd2/sda1-8 D 00068e59 0 215 2 0x00000000 [133560.853282] f6821ecc 00000046 f3492000 00068e59 00000000 c08934c0 f6e6f564 c08934c0 [133560.853282] 4481d5ef 0000792b c08934c0 c08934c0 f6e6f564 c08934c0 c08934c0 f34fc700 [133560.853282] 00000000 0000792b f6e6f2c0 f6821f58 f6f89078 f6821f4c f6821f7c c02d1fe1 [133560.853282] Call Trace: [133560.853282] [] jbd2_journal_commit_transaction+0x171/0x1030 [133560.853282] [] ? dequeue_task_fair+0x68/0x70 [133560.853282] [] ? finish_task_switch+0x43/0xc0 [133560.853282] [] ? default_spin_lock_flags+0x8/0x10 [133560.853282] [] ? lock_timer_base+0x2c/0x60 [133560.853282] [] ? autoremove_wake_function+0x0/0x50 [133560.853282] [] kjournald2+0x95/0x1c0 [133560.853282] [] ? autoremove_wake_function+0x0/0x50 [133560.853282] [] ? kjournald2+0x0/0x1c0 [133560.853282] [] kthread+0x74/0x80 [133560.853282] [] ? kthread+0x0/0x80 [133560.853282] [] kernel_thread_helper+0x7/0x10 [133560.853282] INFO: task rsyslogd:14684 blocked for more than 120 seconds. [133560.853282] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [133560.853282] rsyslogd D 00000000 0 14684 1 0x00000000 [133560.853282] f2799cf4 00000082 00001000 00000000 00000000 c08934c0 f6864f24 c08934c0 [133560.853282] 12a95704 00007932 c08934c0 c08934c0 f6864f24 c08934c0 c08934c0 f7517340 [133560.853282] 12a95704 00007932 f6864c80 f42236c0 f6f89000 f42236c0 f2799d54 c02d0773 [133560.853282] Call Trace: [133560.853282] [] start_this_handle+0x1f3/0x3f0 [133560.853282] [] ? generic_write_end+0xa5/0xb0 [133560.853282] [] ? autoremove_wake_function+0x0/0x50 [133560.853282] [] jbd2_journal_start+0x98/0xd0 [133560.853282] [] ext4_journal_start_sb+0xc0/0xf0 [133560.853282] [] ? generic_getxattr+0x85/0x90 [133560.853282] [] ? generic_getxattr+0x0/0x90 [133560.853282] [] ext4_dirty_inode+0x24/0x50 [133560.853282] [] __mark_inode_dirty+0x31/0x180 [133560.853282] [] ? file_remove_suid+0x24/0x80 [133560.853282] [] file_update_time+0xb5/0x130 [133560.853282] [] __generic_file_aio_write+0x1b8/0x510 [133560.853282] [] generic_file_aio_write+0x57/0xc0 [133560.853282] [] ext4_file_write+0x41/0xd0 [133560.853282] [] do_sync_write+0xc4/0x100 [133560.853282] [] ? autoremove_wake_function+0x0/0x50 [133560.853282] [] ? futex_wake+0xec/0x110 [133560.853282] [] ? security_file_permission+0x14/0x20 [133560.853282] [] ? rw_verify_area+0x64/0xe0 [133560.853282] [] ? do_futex+0xc3/0x1f0 [133560.853282] [] vfs_write+0xa2/0x1a0 [133560.853282] [] ? sys_futex+0x72/0x120 [133560.853282] [] ? do_sync_write+0x0/0x100 [133560.853282] [] sys_write+0x42/0x70 [133560.853282] [] syscall_call+0x7/0xb [133565.980336] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133565.980336] ata3.00: failed command: READ DMA [133565.980336] ata3.00: cmd c8/00:00:80:f1:ee/00:00:00:00:00/e0 tag 0 dma 131072 in [133565.980336] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133565.980336] ata3.00: status: { DRDY } [133565.980336] ata3: hard resetting link [133566.300174] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133566.300174] ata3.00: configured for UDMA/33 [133566.300174] ata3.00: device reported invalid CHS sector 0 [133566.300174] ata3: EH complete [133596.980243] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133596.980243] ata3.00: failed command: READ DMA [133596.980243] ata3.00: cmd c8/00:00:80:f1:ee/00:00:00:00:00/e0 tag 0 dma 131072 in [133596.980243] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133596.980243] ata3.00: status: { DRDY } [133596.980243] ata3: hard resetting link [133597.300490] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133597.300490] ata3.00: configured for UDMA/33 [133597.300490] ata3.00: device reported invalid CHS sector 0 [133597.300490] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [133597.300490] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [133597.300490] Descriptor sense data with sense descriptors (in hex): [133597.300490] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [133597.300490] 00 00 00 00 [133597.300490] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [133597.300490] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 00 ee f1 80 00 01 00 00 [133597.300490] end_request: I/O error, dev sda, sector 15659392 [133597.300490] ata3: EH complete [133627.980186] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133627.980186] ata3.00: failed command: READ DMA [133627.980186] ata3.00: cmd c8/00:08:80:44:e1/00:00:00:00:00/e5 tag 0 dma 4096 in [133627.980186] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133627.980186] ata3.00: status: { DRDY } [133627.980186] ata3: hard resetting link [133628.300175] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133628.300175] ata3.00: configured for UDMA/33 [133628.300175] ata3.00: device reported invalid CHS sector 0 [133628.300175] ata3: EH complete [133658.980317] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133658.980317] ata3.00: failed command: READ DMA [133658.980317] ata3.00: cmd c8/00:08:80:44:e1/00:00:00:00:00/e5 tag 0 dma 4096 in [133658.980317] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133658.980317] ata3.00: status: { DRDY } [133658.980317] ata3: hard resetting link [133659.300147] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133659.300147] ata3.00: configured for UDMA/33 [133659.300147] ata3.00: device reported invalid CHS sector 0 [133659.300147] ata3: EH complete [133689.981342] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [133689.981342] ata3.00: failed command: READ DMA [133689.981342] ata3.00: cmd c8/00:08:80:44:e1/00:00:00:00:00/e5 tag 0 dma 4096 in [133689.981342] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [133689.981342] ata3.00: status: { DRDY } [133689.981342] ata3: hard resetting link [133690.300173] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [133690.300173] ata3.00: configured for UDMA/33 [133690.300173] ata3.00: device reported invalid CHS sector 0 [133690.300173] ata3: EH complete [133935.880106] hrtimer: interrupt took 17416737 ns [183075.980481] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183075.980481] ata3.00: failed command: WRITE DMA [183075.980481] ata3.00: cmd ca/00:08:50:08:80/00:00:00:00:00/e3 tag 0 dma 4096 out [183075.980481] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183075.980481] ata3.00: status: { DRDY } [183075.980481] ata3: hard resetting link [183076.300170] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183076.300170] ata3.00: configured for UDMA/33 [183076.300170] ata3.00: device reported invalid CHS sector 0 [183076.300170] ata3: EH complete [183106.980689] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183106.980689] ata3.00: failed command: WRITE DMA [183106.980689] ata3.00: cmd ca/00:08:50:08:80/00:00:00:00:00/e3 tag 0 dma 4096 out [183106.980689] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183106.980689] ata3.00: status: { DRDY } [183106.980689] ata3: hard resetting link [183107.300172] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183107.300172] ata3.00: configured for UDMA/33 [183107.300172] ata3.00: device reported invalid CHS sector 0 [183107.300172] ata3: EH complete [183137.980433] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183137.980433] ata3.00: failed command: WRITE DMA [183137.980433] ata3.00: cmd ca/00:08:50:08:80/00:00:00:00:00/e3 tag 0 dma 4096 out [183137.980433] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183137.980433] ata3.00: status: { DRDY } [183137.980433] ata3: hard resetting link [183138.300152] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183138.300152] ata3.00: configured for UDMA/33 [183138.300152] ata3.00: device reported invalid CHS sector 0 [183138.300152] ata3: EH complete [183168.980115] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183168.980115] ata3.00: failed command: WRITE DMA [183168.980115] ata3.00: cmd ca/00:08:50:08:80/00:00:00:00:00/e3 tag 0 dma 4096 out [183168.980115] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183168.980115] ata3.00: status: { DRDY } [183168.980115] ata3: hard resetting link [183169.300173] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183169.300173] ata3.00: configured for UDMA/33 [183169.300173] ata3.00: device reported invalid CHS sector 0 [183169.300173] ata3: EH complete [183199.980247] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183199.980247] ata3.00: failed command: WRITE DMA [183199.980247] ata3.00: cmd ca/00:08:50:08:80/00:00:00:00:00/e3 tag 0 dma 4096 out [183199.980247] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183199.980247] ata3.00: status: { DRDY } [183199.980247] ata3: hard resetting link [183200.300163] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183200.300163] ata3.00: configured for UDMA/33 [183200.300163] ata3.00: device reported invalid CHS sector 0 [183200.300163] ata3: EH complete [183230.980809] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183230.980809] ata3.00: failed command: WRITE DMA [183230.980809] ata3.00: cmd ca/00:08:50:08:80/00:00:00:00:00/e3 tag 0 dma 4096 out [183230.980809] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183230.980809] ata3.00: status: { DRDY } [183230.980809] ata3: hard resetting link [183231.300174] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183231.300174] ata3.00: configured for UDMA/33 [183231.300174] ata3.00: device reported invalid CHS sector 0 [183231.300174] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [183231.300174] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [183231.300174] Descriptor sense data with sense descriptors (in hex): [183231.300174] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [183231.300174] 00 00 00 00 [183231.300174] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [183231.300174] sd 2:0:0:0: [sda] CDB: Write(10): 2a 00 03 80 08 50 00 00 08 00 [183231.300174] end_request: I/O error, dev sda, sector 58722384 [183231.300174] __ratelimit: 18 callbacks suppressed [183231.300174] Buffer I/O error on device sda1, logical block 7340042 [183231.300174] lost page write due to I/O error on sda1 [183231.300174] ata3: EH complete [183261.980597] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183261.980597] ata3.00: failed command: WRITE DMA [183261.980597] ata3.00: cmd ca/00:10:98:96:00/00:00:00:00:00/e3 tag 0 dma 8192 out [183261.980597] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183261.980597] ata3.00: status: { DRDY } [183261.980597] ata3: hard resetting link [183262.301079] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183262.301079] ata3.00: configured for UDMA/33 [183262.301079] ata3.00: device reported invalid CHS sector 0 [183262.301079] ata3: EH complete [183292.980324] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183292.980324] ata3.00: failed command: WRITE DMA [183292.980324] ata3.00: cmd ca/00:10:98:96:00/00:00:00:00:00/e3 tag 0 dma 8192 out [183292.980324] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183292.980324] ata3.00: status: { DRDY } [183292.980324] ata3: hard resetting link [183293.300174] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183293.300174] ata3.00: configured for UDMA/33 [183293.300174] ata3.00: device reported invalid CHS sector 0 [183293.300174] ata3: EH complete [183323.980246] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183323.980246] ata3.00: failed command: WRITE DMA [183323.980246] ata3.00: cmd ca/00:10:98:96:00/00:00:00:00:00/e3 tag 0 dma 8192 out [183323.980246] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183323.980246] ata3.00: status: { DRDY } [183323.980246] ata3: hard resetting link [183324.300177] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183324.300177] ata3.00: configured for UDMA/33 [183324.300177] ata3.00: device reported invalid CHS sector 0 [183324.300177] ata3: EH complete [183354.980571] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183354.980571] ata3.00: failed command: WRITE DMA [183354.980571] ata3.00: cmd ca/00:10:98:96:00/00:00:00:00:00/e3 tag 0 dma 8192 out [183354.980571] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183354.980571] ata3.00: status: { DRDY } [183354.980571] ata3: hard resetting link [183355.300172] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183355.300172] ata3.00: configured for UDMA/33 [183355.300172] ata3.00: device reported invalid CHS sector 0 [183355.300172] ata3: EH complete [183385.980613] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183385.980613] ata3.00: failed command: WRITE DMA [183385.980613] ata3.00: cmd ca/00:10:98:96:00/00:00:00:00:00/e3 tag 0 dma 8192 out [183385.980613] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183385.980613] ata3.00: status: { DRDY } [183385.980613] ata3: hard resetting link [183386.300169] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183386.300169] ata3.00: configured for UDMA/33 [183386.300169] ata3.00: device reported invalid CHS sector 0 [183386.300169] ata3: EH complete [183416.981731] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183416.981731] ata3.00: failed command: WRITE DMA [183416.981731] ata3.00: cmd ca/00:10:98:96:00/00:00:00:00:00/e3 tag 0 dma 8192 out [183416.981731] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183416.981731] ata3.00: status: { DRDY } [183416.981731] ata3: hard resetting link [183417.301223] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183417.301223] ata3.00: configured for UDMA/33 [183417.301223] ata3.00: device reported invalid CHS sector 0 [183417.301223] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [183417.301223] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [183417.301223] Descriptor sense data with sense descriptors (in hex): [183417.301223] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [183417.301223] 00 00 00 00 [183417.301223] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [183417.301223] sd 2:0:0:0: [sda] CDB: Write(10): 2a 00 03 00 96 98 00 00 10 00 [183417.301223] end_request: I/O error, dev sda, sector 50370200 [183417.301223] Buffer I/O error on device sda1, logical block 6296019 [183417.301223] lost page write due to I/O error on sda1 [183417.301223] Buffer I/O error on device sda1, logical block 6296020 [183417.301223] lost page write due to I/O error on sda1 [183417.301223] ata3: EH complete [183447.980241] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183447.980241] ata3.00: failed command: WRITE DMA EXT [183447.980241] ata3.00: cmd 35/00:28:80:84:52/00:01:02:00:00/e0 tag 0 dma 151552 out [183447.980241] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183447.980241] ata3.00: status: { DRDY } [183447.980241] ata3: hard resetting link [183448.300177] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183448.300177] ata3.00: configured for UDMA/33 [183448.300177] ata3.00: device reported invalid CHS sector 0 [183448.300177] ata3: EH complete [183478.980732] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183478.980732] ata3.00: failed command: WRITE DMA EXT [183478.980732] ata3.00: cmd 35/00:28:80:84:52/00:01:02:00:00/e0 tag 0 dma 151552 out [183478.980732] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183478.980732] ata3.00: status: { DRDY } [183478.980732] ata3: hard resetting link [183479.301065] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183479.301065] ata3.00: configured for UDMA/33 [183479.301065] ata3.00: device reported invalid CHS sector 0 [183479.301065] ata3: EH complete [183509.980624] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183509.980624] ata3.00: failed command: WRITE DMA EXT [183509.980624] ata3.00: cmd 35/00:28:80:84:52/00:01:02:00:00/e0 tag 0 dma 151552 out [183509.980624] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183509.980624] ata3.00: status: { DRDY } [183509.980624] ata3: hard resetting link [183510.301048] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183510.301048] ata3.00: configured for UDMA/33 [183510.301048] ata3.00: device reported invalid CHS sector 0 [183510.301048] ata3: EH complete [183540.980501] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183540.980501] ata3.00: failed command: WRITE DMA EXT [183540.980501] ata3.00: cmd 35/00:28:80:84:52/00:01:02:00:00/e0 tag 0 dma 151552 out [183540.980501] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183540.980501] ata3.00: status: { DRDY } [183540.980501] ata3: hard resetting link [183541.301059] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183541.301059] ata3.00: configured for UDMA/33 [183541.301059] ata3.00: device reported invalid CHS sector 0 [183541.301059] ata3: EH complete [183571.980201] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183571.980201] ata3.00: failed command: WRITE DMA EXT [183571.980201] ata3.00: cmd 35/00:28:80:84:52/00:01:02:00:00/e0 tag 0 dma 151552 out [183571.980201] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183571.980201] ata3.00: status: { DRDY } [183571.980201] ata3: hard resetting link [183572.300167] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183572.300167] ata3.00: configured for UDMA/33 [183572.300167] ata3.00: device reported invalid CHS sector 0 [183572.300167] ata3: EH complete [183602.980658] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183602.980658] ata3.00: failed command: WRITE DMA EXT [183602.980658] ata3.00: cmd 35/00:28:80:84:52/00:01:02:00:00/e0 tag 0 dma 151552 out [183602.980658] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183602.980658] ata3.00: status: { DRDY } [183602.980658] ata3: hard resetting link [183603.300167] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183603.300167] ata3.00: configured for UDMA/33 [183603.300167] ata3.00: device reported invalid CHS sector 0 [183603.300167] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [183603.300167] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [183603.300167] Descriptor sense data with sense descriptors (in hex): [183603.300167] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [183603.300167] 00 00 00 00 [183603.300167] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [183603.300167] sd 2:0:0:0: [sda] CDB: Write(10): 2a 00 02 52 84 80 00 01 28 00 [183603.300167] end_request: I/O error, dev sda, sector 38962304 [183603.300167] Buffer I/O error on device sda1, logical block 4870032 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] Buffer I/O error on device sda1, logical block 4870033 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] Buffer I/O error on device sda1, logical block 4870034 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] Buffer I/O error on device sda1, logical block 4870035 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] Buffer I/O error on device sda1, logical block 4870036 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] Buffer I/O error on device sda1, logical block 4870037 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] Buffer I/O error on device sda1, logical block 4870038 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] Buffer I/O error on device sda1, logical block 4870039 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] Buffer I/O error on device sda1, logical block 4870040 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] Buffer I/O error on device sda1, logical block 4870041 [183603.300167] lost page write due to I/O error on sda1 [183603.300167] ata3: EH complete [183633.980629] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183633.980629] ata3.00: failed command: WRITE DMA [183633.980629] ata3.00: cmd ca/00:10:a8:33:80/00:00:00:00:00/e2 tag 0 dma 8192 out [183633.980629] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [183633.980629] ata3.00: status: { DRDY } [183633.980629] ata3: hard resetting link [183634.300179] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [183634.300179] ata3.00: configured for UDMA/33 [183634.300179] ata3.00: device reported invalid CHS sector 0 [183634.300179] ata3: EH complete [183649.033549] JBD2: Detected IO errors while flushing file data on sda1-8 [227070.977223] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227070.977223] ata3.00: failed command: FLUSH CACHE [227070.977223] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227070.977223] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227070.977223] ata3.00: status: { DRDY } [227070.977223] ata3: hard resetting link [227071.297398] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227071.297398] ata3.00: configured for UDMA/33 [227071.297398] ata3.00: device reported invalid CHS sector 0 [227071.297398] ata3: EH complete [227101.977175] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227101.977175] ata3.00: failed command: FLUSH CACHE [227101.977175] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227101.977175] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227101.977175] ata3.00: status: { DRDY } [227101.977175] ata3: hard resetting link [227102.297421] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227102.297421] ata3.00: configured for UDMA/33 [227102.297421] ata3.00: device reported invalid CHS sector 0 [227102.297421] ata3: EH complete [227132.976639] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227132.976639] ata3.00: failed command: FLUSH CACHE [227132.976639] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227132.976639] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227132.976639] ata3.00: status: { DRDY } [227132.976639] ata3: hard resetting link [227133.300113] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227133.300113] ata3.00: configured for UDMA/33 [227133.300113] ata3.00: device reported invalid CHS sector 0 [227133.300113] ata3: EH complete [227164.004766] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227164.004766] ata3.00: failed command: FLUSH CACHE [227164.004766] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227164.004766] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227164.004766] ata3.00: status: { DRDY } [227164.004766] ata3: hard resetting link [227164.325205] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227164.326736] ata3.00: configured for UDMA/33 [227164.326736] ata3.00: device reported invalid CHS sector 0 [227164.326736] ata3: EH complete [227194.988707] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227194.988707] ata3.00: failed command: FLUSH CACHE [227194.988707] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227194.988707] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227194.988707] ata3.00: status: { DRDY } [227194.988707] ata3: hard resetting link [227195.316173] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227195.316173] ata3.00: configured for UDMA/33 [227195.316173] ata3.00: device reported invalid CHS sector 0 [227195.316173] ata3: EH complete [227225.980504] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227225.980504] ata3.00: failed command: FLUSH CACHE [227225.980504] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227225.980504] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227225.980504] ata3.00: status: { DRDY } [227225.980504] ata3: hard resetting link [227226.300154] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227226.300154] ata3.00: configured for UDMA/33 [227226.300154] ata3.00: device reported invalid CHS sector 0 [227226.300154] ata3: EH complete [227256.981236] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227256.981236] ata3.00: failed command: FLUSH CACHE [227256.981236] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227256.981236] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227256.981236] ata3.00: status: { DRDY } [227256.981236] ata3: hard resetting link [227257.300163] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227257.300163] ata3.00: configured for UDMA/33 [227257.300163] ata3.00: device reported invalid CHS sector 0 [227257.300163] ata3: EH complete [227287.980585] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227287.980585] ata3.00: failed command: FLUSH CACHE [227287.980585] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227287.980585] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227287.980585] ata3.00: status: { DRDY } [227287.980585] ata3: hard resetting link [227288.300174] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227288.300174] ata3.00: configured for UDMA/33 [227288.300174] ata3.00: device reported invalid CHS sector 0 [227288.300174] ata3: EH complete [227318.980623] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227318.980623] ata3.00: failed command: FLUSH CACHE [227318.980623] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227318.980623] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227318.980623] ata3.00: status: { DRDY } [227318.980623] ata3: hard resetting link [227319.301096] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227319.301096] ata3.00: configured for UDMA/33 [227319.301096] ata3.00: device reported invalid CHS sector 0 [227319.301096] ata3: EH complete [227349.980612] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227349.980612] ata3.00: failed command: FLUSH CACHE [227349.980612] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227349.980612] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227349.980612] ata3.00: status: { DRDY } [227349.980612] ata3: hard resetting link [227350.300176] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227350.300176] ata3.00: configured for UDMA/33 [227350.300176] ata3.00: device reported invalid CHS sector 0 [227350.300176] ata3: EH complete [227380.980526] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227380.980526] ata3.00: failed command: FLUSH CACHE [227380.980526] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227380.980526] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227380.980526] ata3.00: status: { DRDY } [227380.980526] ata3: hard resetting link [227381.300170] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227381.300170] ata3.00: configured for UDMA/33 [227381.300170] ata3.00: device reported invalid CHS sector 0 [227381.300170] ata3: EH complete [227411.981418] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227411.981418] ata3.00: failed command: FLUSH CACHE [227411.981418] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227411.981418] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227411.981418] ata3.00: status: { DRDY } [227411.981418] ata3: hard resetting link [227412.300170] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227412.300170] ata3.00: configured for UDMA/33 [227412.300170] ata3.00: device reported invalid CHS sector 0 [227412.300170] end_request: I/O error, dev sda, sector 46471856 [227412.300170] ata3: EH complete [227412.300170] Aborting journal on device sda1-8. [227412.301325] EXT4-fs error (device sda1): ext4_journal_start_sb: Detected aborted journal [227412.301325] EXT4-fs (sda1): Remounting filesystem read-only [227442.980604] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227442.980604] ata3.00: failed command: READ DMA [227442.980604] ata3.00: cmd c8/00:80:38:a1:1f/00:00:00:00:00/e3 tag 0 dma 65536 in [227442.980604] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227442.980604] ata3.00: status: { DRDY } [227442.980604] ata3: hard resetting link [227443.300172] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227443.300172] ata3.00: configured for UDMA/33 [227443.300172] ata3.00: device reported invalid CHS sector 0 [227443.300172] ata3: EH complete [227473.981242] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227473.981242] ata3.00: failed command: READ DMA [227473.981242] ata3.00: cmd c8/00:80:38:a1:1f/00:00:00:00:00/e3 tag 0 dma 65536 in [227473.981242] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227473.981242] ata3.00: status: { DRDY } [227473.981242] ata3: hard resetting link [227474.300178] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227474.300178] ata3.00: configured for UDMA/33 [227474.300178] ata3.00: device reported invalid CHS sector 0 [227474.300178] ata3: EH complete [227504.980717] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227504.980717] ata3.00: failed command: READ DMA [227504.980717] ata3.00: cmd c8/00:80:38:a1:1f/00:00:00:00:00/e3 tag 0 dma 65536 in [227504.980717] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227504.980717] ata3.00: status: { DRDY } [227504.980717] ata3: hard resetting link [227505.300173] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227505.300173] ata3.00: configured for UDMA/33 [227505.300173] ata3.00: device reported invalid CHS sector 0 [227505.300173] ata3: EH complete [227535.980369] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227535.980369] ata3.00: failed command: READ DMA [227535.980369] ata3.00: cmd c8/00:80:38:a1:1f/00:00:00:00:00/e3 tag 0 dma 65536 in [227535.980369] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227535.980369] ata3.00: status: { DRDY } [227535.980369] ata3: hard resetting link [227536.301240] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227536.301240] ata3.00: configured for UDMA/33 [227536.301240] ata3.00: device reported invalid CHS sector 0 [227536.301240] ata3: EH complete [227566.980619] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227566.980619] ata3.00: failed command: READ DMA [227566.980619] ata3.00: cmd c8/00:80:38:a1:1f/00:00:00:00:00/e3 tag 0 dma 65536 in [227566.980619] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227566.980619] ata3.00: status: { DRDY } [227566.980619] ata3: hard resetting link [227567.300169] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227567.300169] ata3.00: configured for UDMA/33 [227567.300169] ata3.00: device reported invalid CHS sector 0 [227567.300169] ata3: EH complete [227597.980435] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227597.980435] ata3.00: failed command: READ DMA [227597.980435] ata3.00: cmd c8/00:80:38:a1:1f/00:00:00:00:00/e3 tag 0 dma 65536 in [227597.980435] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227597.980435] ata3.00: status: { DRDY } [227597.980435] ata3: hard resetting link [227598.300175] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227598.300175] ata3.00: configured for UDMA/33 [227598.300175] ata3.00: device reported invalid CHS sector 0 [227598.300175] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [227598.300175] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [227598.300175] Descriptor sense data with sense descriptors (in hex): [227598.300175] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [227598.300175] 00 00 00 00 [227598.300175] sd 2:0:0:0: [sda] Add. Sense: No additional sense information [227598.300175] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 1f a1 38 00 00 80 00 [227598.300175] end_request: I/O error, dev sda, sector 52404536 [227598.300175] ata3: EH complete [227628.969411] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [227628.969411] ata3.00: failed command: FLUSH CACHE [227628.969411] ata3.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [227628.969411] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [227628.969411] ata3.00: status: { DRDY } [227628.969411] ata3: hard resetting link [227629.288229] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [227629.288229] ata3.00: configured for UDMA/33 [227629.288229] ata3.00: device reported invalid CHS sector 0 [227629.288229] ata3: EH complete