VirtualBox

Ticket #8311: dmesg-jackieku.txt

File dmesg-jackieku.txt, 48.1 KB (added by JackieKu, 12 years ago)
Line 
1[ 0.000000] Linux version 3.2.12-gentoo (root@ku) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #5 SMP Mon Apr 23 16:03:42 CST 2012
2[ 0.000000] Command line: ramdisk_size=5000 real_root=/dev/mapper/vg.safe-rootfs mountopts=user_xattr raid=noautodetect initrd_raid noapictimer softlevel=vbox really-init-all
3[ 0.000000] BIOS-provided physical RAM map:
4[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
5[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
6[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
7[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
8[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (ACPI data)
9[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
10[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
11[ 0.000000] NX (Execute Disable) protection: active
12[ 0.000000] DMI 2.5 present.
13[ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
14[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
15[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
16[ 0.000000] No AGP bridge found
17[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
18[ 0.000000] MTRR default type: uncachable
19[ 0.000000] MTRR variable ranges disabled:
20[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
21[ 0.000000] CPU MTRRs all blank - virtualized system.
22[ 0.000000] last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
23[ 0.000000] initial memory mapped : 0 - 20000000
24[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
25[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfff0000
26[ 0.000000] 0000000000 - 00dfe00000 page 2M
27[ 0.000000] 00dfe00000 - 00dfff0000 page 4k
28[ 0.000000] kernel direct mapping tables up to dfff0000 @ 1fffa000-20000000
29[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
30[ 0.000000] 0100000000 - 0220000000 page 2M
31[ 0.000000] kernel direct mapping tables up to 220000000 @ dffe6000-dfff0000
32[ 0.000000] RAMDISK: 37bd6000 - 37ff0000
33[ 0.000000] ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
34[ 0.000000] ACPI: XSDT 00000000dfff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
35[ 0.000000] ACPI: FACP 00000000dfff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
36[ 0.000000] ACPI: DSDT 00000000dfff0480 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
37[ 0.000000] ACPI: FACS 00000000dfff0200 00040
38[ 0.000000] ACPI: APIC 00000000dfff0240 0006C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
39[ 0.000000] ACPI: SSDT 00000000dfff02b0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
40[ 0.000000] ACPI: Local APIC address 0xfee00000
41[ 0.000000] No NUMA configuration found
42[ 0.000000] Faking a node at 0000000000000000-0000000220000000
43[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
44[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
45[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
46[ 0.000000] Zone PFN ranges:
47[ 0.000000] DMA 0x00000010 -> 0x00001000
48[ 0.000000] DMA32 0x00001000 -> 0x00100000
49[ 0.000000] Normal 0x00100000 -> 0x00220000
50[ 0.000000] Movable zone start PFN for each node
51[ 0.000000] early_node_map[3] active PFN ranges
52[ 0.000000] 0: 0x00000010 -> 0x0000009f
53[ 0.000000] 0: 0x00000100 -> 0x000dfff0
54[ 0.000000] 0: 0x00100000 -> 0x00220000
55[ 0.000000] On node 0 totalpages: 2097023
56[ 0.000000] DMA zone: 64 pages used for memmap
57[ 0.000000] DMA zone: 5 pages reserved
58[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
59[ 0.000000] DMA32 zone: 16320 pages used for memmap
60[ 0.000000] DMA32 zone: 897072 pages, LIFO batch:31
61[ 0.000000] Normal zone: 18432 pages used for memmap
62[ 0.000000] Normal zone: 1161216 pages, LIFO batch:31
63[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
64[ 0.000000] ACPI: Local APIC address 0xfee00000
65[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
66[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
67[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
68[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
69[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
70[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
71[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
72[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
73[ 0.000000] ACPI: IRQ0 used by override.
74[ 0.000000] ACPI: IRQ2 used by override.
75[ 0.000000] ACPI: IRQ9 used by override.
76[ 0.000000] Using ACPI (MADT) for SMP configuration information
77[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
78[ 0.000000] nr_irqs_gsi: 40
79[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ffc0000)
80[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
81[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88021fc00000 s70400 r8192 d23808 u524288
82[ 0.000000] pcpu-alloc: s70400 r8192 d23808 u524288 alloc=1*2097152
83[ 0.000000] pcpu-alloc: [0] 0 1 2 3
84[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062202
85[ 0.000000] Policy zone: Normal
86[ 0.000000] Kernel command line: ramdisk_size=5000 real_root=/dev/mapper/vg.safe-rootfs mountopts=user_xattr raid=noautodetect initrd_raid noapictimer softlevel=vbox really-init-all
87[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
88[ 0.000000] Checking aperture...
89[ 0.000000] No AGP bridge found
90[ 0.000000] Memory: 8172216k/8912896k available (6782k kernel code, 524804k absent, 215876k reserved, 6006k data, 568k init)
91[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
92[ 0.000000] Hierarchical RCU implementation.
93[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
94[ 0.000000] Console: colour VGA+ 80x25
95[ 0.000000] console [tty0] enabled
96[ 0.000000] Fast TSC calibration using PIT
97[ 0.000000] Detected 3180.944 MHz processor.
98[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
99[ 0.003713] Calibrating delay loop (skipped), value calculated using timer frequency.. 6364.96 BogoMIPS (lpj=10603146)
100[ 0.004480] pid_max: default: 32768 minimum: 301
101[ 0.006690] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
102[ 0.013174] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
103[ 0.016184] Mount-cache hash table entries: 256
104[ 0.018561] tseg: 0000000000
105[ 0.018677] CPU: Physical Processor ID: 0
106[ 0.019112] CPU: Processor Core ID: 0
107[ 0.019501] mce: CPU supports 0 MCE banks
108[ 0.020290] using AMD E400 aware idle routine
109[ 0.020848] ACPI: Core revision 20110623
110[ 0.023623] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
111[ 0.060218] CPU0: AMD Phenom(tm) II X6 1100T Processor stepping 00
112[ 0.060824] Disabling APIC timer
113[ 0.062019] Performance Events: Broken PMU hardware detected, using software events only.
114[ 0.063085] Booting Node 0, Processors #1
115[ 0.063329] smpboot cpu 1: start_ip = 9a000
116[ 0.006666] mce: CPU supports 0 MCE banks
117[ 0.153709] #2
118[ 0.154172] smpboot cpu 2: start_ip = 9a000
119[ 0.006666] mce: CPU supports 0 MCE banks
120[ 0.247549] #3 Ok.
121[ 0.248224] smpboot cpu 3: start_ip = 9a000
122[ 0.006666] mce: CPU supports 0 MCE banks
123[ 0.343512] Brought up 4 CPUs
124[ 0.344239] Total of 4 processors activated (25757.54 BogoMIPS).
125[ 0.345773] devtmpfs: initialized
126[ 0.346355] xor: automatically using best checksumming function: generic_sse
127[ 0.363323] generic_sse: 667.200 MB/sec
128[ 0.363717] xor: using function: generic_sse (667.200 MB/sec)
129[ 0.364148] NET: Registered protocol family 16
130[ 0.366435] Extended Config Space enabled on 0 nodes
131[ 0.366918] ACPI: bus type pci registered
132[ 0.367299] PCI: Using configuration type 1 for base access
133[ 0.367684] PCI: Using configuration type 1 for extended access
134[ 0.401620] bio: create slab <bio-0> at 0
135[ 0.456754] raid6: int64x1 2831 MB/s
136[ 0.513437] raid6: int64x2 3629 MB/s
137[ 0.570062] raid6: int64x4 2786 MB/s
138[ 0.626683] raid6: int64x8 2630 MB/s
139[ 0.683298] raid6: sse2x1 2647 MB/s
140[ 0.739974] raid6: sse2x2 3355 MB/s
141[ 0.796629] raid6: sse2x4 3380 MB/s
142[ 0.797019] raid6: using algorithm sse2x4 (3380 MB/s)
143[ 0.797842] ACPI: Added _OSI(Module Device)
144[ 0.798209] ACPI: Added _OSI(Processor Device)
145[ 0.798588] ACPI: Added _OSI(3.0 _SCP Extensions)
146[ 0.798954] ACPI: Added _OSI(Processor Aggregator Device)
147[ 0.799558] ACPI: EC: Look up EC in DSDT
148[ 0.799759] ACPI: Executed 1 blocks of module-level executable AML code
149[ 0.802290] ACPI: Interpreter enabled
150[ 0.802648] ACPI: (supports S0 S5)
151[ 0.803300] ACPI: Using IOAPIC for interrupt routing
152[ 0.808928] ACPI: No dock devices found.
153[ 0.809297] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
154[ 0.810006] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
155[ 0.810708] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
156[ 0.810710] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
157[ 0.810712] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
158[ 0.810714] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xffdfffff] (ignored)
159[ 0.810742] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
160[ 0.810961] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
161[ 0.811283] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
162[ 0.819870] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe1ffffff pref]
163[ 0.876810] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
164[ 0.876910] pci 0000:00:03.0: reg 10: [io 0xd000-0xd01f]
165[ 0.877316] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
166[ 0.881584] pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
167[ 0.891789] pci 0000:00:04.0: reg 14: [mem 0xf0000000-0xf03fffff]
168[ 0.896461] pci 0000:00:04.0: reg 18: [mem 0xf0400000-0xf0403fff pref]
169[ 0.932264] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
170[ 0.941898] pci 0000:00:06.0: reg 10: [mem 0xf0404000-0xf0404fff]
171[ 0.992379] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
172[ 0.992641] pci 0000:00:08.0: [1af4:1000] type 0 class 0x000200
173[ 0.993390] pci 0000:00:08.0: reg 10: [io 0xd040-0xd05f]
174[ 0.993814] pci 0000:00:09.0: [1af4:1000] type 0 class 0x000200
175[ 0.993887] pci 0000:00:09.0: reg 10: [io 0xd060-0xd07f]
176[ 0.994308] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03
177[ 1.001489] pci 0000:00:0b.0: reg 10: [mem 0xf0405000-0xf0405fff]
178[ 1.050412] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
179[ 1.057282] pci 0000:00:0d.0: reg 10: [io 0xd080-0xd087]
180[ 1.074506] pci 0000:00:0d.0: reg 18: [io 0xd090-0xd097]
181[ 1.085344] pci 0000:00:0d.0: reg 20: [io 0xd0a0-0xd0af]
182[ 1.094468] pci 0000:00:0d.0: reg 24: [mem 0xf0406000-0xf0407fff]
183[ 1.102889] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
184[ 1.104176] pci0000:00: Requesting ACPI _OSC control (0x1d)
185[ 1.104605] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
186[ 1.105285] ACPI _OSC control for PCIe not granted, disabling ASPM
187[ 1.109756] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
188[ 1.110809] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
189[ 1.111748] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
190[ 1.112697] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
191[ 1.114314] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
192[ 1.114969] vgaarb: loaded
193[ 1.115256] vgaarb: bridge control possible 0000:00:02.0
194[ 1.116095] SCSI subsystem initialized
195[ 1.117269] libata version 3.00 loaded.
196[ 1.117681] usbcore: registered new interface driver usbfs
197[ 1.118262] usbcore: registered new interface driver hub
198[ 1.118961] usbcore: registered new device driver usb
199[ 1.120726] PCI: Using ACPI for IRQ routing
200[ 1.121104] PCI: pci_cache_line_size set to 64 bytes
201[ 1.121272] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
202[ 1.121277] reserve RAM buffer: 00000000dfff0000 - 00000000dfffffff
203[ 1.122270] cfg80211: Calling CRDA to update world regulatory domain
204[ 1.140997] pnp: PnP ACPI init
205[ 1.141362] ACPI: bus type pnp registered
206[ 1.141816] pnp 00:00: [bus 00-ff]
207[ 1.141818] pnp 00:00: [io 0x0cf8-0x0cff]
208[ 1.141820] pnp 00:00: [io 0x0000-0x0cf7 window]
209[ 1.141821] pnp 00:00: [io 0x0d00-0xffff window]
210[ 1.141823] pnp 00:00: [mem 0x000a0000-0x000bffff window]
211[ 1.141824] pnp 00:00: [mem 0xe0000000-0xffdfffff window]
212[ 1.142006] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
213[ 1.142019] pnp 00:01: [io 0x0060]
214[ 1.142020] pnp 00:01: [io 0x0064]
215[ 1.142046] pnp 00:01: [irq 1]
216[ 1.142185] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
217[ 1.142192] pnp 00:02: [io 0x0000-0x000f]
218[ 1.142193] pnp 00:02: [io 0x0080-0x008f]
219[ 1.142194] pnp 00:02: [io 0x00c0-0x00df]
220[ 1.142196] pnp 00:02: [dma 4]
221[ 1.142322] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
222[ 1.142365] pnp 00:03: [irq 12]
223[ 1.142480] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
224[ 1.142490] pnp 00:04: [io 0x0378-0x037f]
225[ 1.142492] pnp 00:04: [io 0x0778-0x077f]
226[ 1.142514] pnp 00:04: [irq 7]
227[ 1.142654] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
228[ 1.142962] pnp: PnP ACPI: found 5 devices
229[ 1.143262] ACPI: ACPI bus type pnp unregistered
230[ 1.148508] Switching to clocksource acpi_pm
231[ 1.149131] PCI: max bus depth: 0 pci_try_num: 1
232[ 1.149131] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
233[ 1.149131] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffff]
234[ 1.149131] NET: Registered protocol family 2
235[ 1.149925] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
236[ 1.149173] Clockevents: could not switch to one-shot mode: lapic is not functional.
237[ 1.149173] Could not switch to high resolution mode on CPU 0
238[ 1.149162] Clockevents: could not switch to one-shot mode: lapic is not functional.
239[ 1.149162] Could not switch to high resolution mode on CPU 2
240[ 1.148923] Clockevents: could not switch to one-shot mode: lapic is not functional.
241[ 1.148923] Could not switch to high resolution mode on CPU 3
242[ 1.152269] Clockevents: could not switch to one-shot mode: lapic is not functional.
243[ 1.152992] Could not switch to high resolution mode on CPU 1
244[ 1.155778] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
245[ 1.161777] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
246[ 1.163957] TCP: Hash tables configured (established 524288 bind 65536)
247[ 1.165033] TCP reno registered
248[ 1.165385] UDP hash table entries: 4096 (order: 5, 131072 bytes)
249[ 1.165861] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
250[ 1.166395] NET: Registered protocol family 1
251[ 1.166974] RPC: Registered named UNIX socket transport module.
252[ 1.167511] RPC: Registered udp transport module.
253[ 1.167886] RPC: Registered tcp transport module.
254[ 1.168724] RPC: Registered tcp NFSv4.1 backchannel transport module.
255[ 1.169168] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
256[ 1.169617] pci 0000:00:01.0: Activating ISA DMA hang workarounds
257[ 1.170043] pci 0000:00:02.0: Boot video device
258[ 1.170090] pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
259[ 1.170658] pci 0000:00:06.0: PCI INT A disabled
260[ 1.171146] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
261[ 1.171709] pci 0000:00:0b.0: PCI INT A disabled
262[ 1.172105] PCI: CLS 0 bytes, default 64
263[ 1.172155] Trying to unpack rootfs image as initramfs...
264[ 1.776352] Freeing initrd memory: 4200k freed
265[ 1.777789] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
266[ 1.778217] Placing 64MB software IO TLB between ffff8800dbfe6000 - ffff8800dffe6000
267[ 1.778801] software IO TLB at phys 0xdbfe6000 - 0xdffe6000
268[ 1.779620] platform rtc_cmos: registered platform RTC device (no PNP device found)
269[ 1.787089] microcode: CPU0: patch_level=0x00000000
270[ 1.787647] microcode: CPU1: patch_level=0x00000000
271[ 1.788093] microcode: CPU2: patch_level=0x00000000
272[ 1.788529] microcode: CPU3: patch_level=0x00000000
273[ 1.789160] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
274[ 1.790065] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
275[ 1.791371] audit: initializing netlink socket (disabled)
276[ 1.791766] type=2000 audit(1336247448.789:1): initialized
277[ 1.872043] VFS: Disk quotas dquot_6.5.2
278[ 1.872597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
279[ 1.875517] squashfs: version 4.0 (2009/01/31) Phillip Lougher
280[ 1.877485] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
281[ 1.879024] fuse init (API version 7.17)
282[ 1.881366] Btrfs loaded
283[ 1.881706] msgmni has been set to 15969
284[ 1.885066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
285[ 1.885699] io scheduler noop registered
286[ 1.886078] io scheduler deadline registered
287[ 1.886642] io scheduler cfq registered (default)
288[ 1.888175] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
289[ 1.949586] Real Time Clock Driver v1.12b
290[ 1.950370] Linux agpgart interface v0.103
291[ 1.967795] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
292[ 1.968431] ACPI: Power Button [PWRF]
293[ 1.968989] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
294[ 1.969620] ACPI: Sleep Button [SLPF]
295[ 1.977696] brd: module loaded
296[ 1.981617] loop: module loaded
297[ 1.982902] ahci 0000:00:0d.0: version 3.0
298[ 1.982944] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
299[ 1.983503] ahci: SSS flag set, parallel bus scan disabled
300[ 1.984288] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 11 ports 3 Gbps 0x7ff impl SATA mode
301[ 1.984947] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
302[ 1.985371] ahci 0000:00:0d.0: setting latency timer to 64
303[ 1.993915] scsi0 : ahci
304[ 1.994942] scsi1 : ahci
305[ 1.995709] scsi2 : ahci
306[ 1.996547] scsi3 : ahci
307[ 1.997390] scsi4 : ahci
308[ 1.998744] scsi5 : ahci
309[ 1.999582] scsi6 : ahci
310[ 2.000395] scsi7 : ahci
311[ 2.001184] scsi8 : ahci
312[ 2.001926] scsi9 : ahci
313[ 2.002688] scsi10 : ahci
314[ 2.003338] ata1: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406100 irq 21
315[ 2.004008] ata2: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406180 irq 21
316[ 2.004705] ata3: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406200 irq 21
317[ 2.005330] ata4: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406280 irq 21
318[ 2.005988] ata5: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406300 irq 21
319[ 2.006621] ata6: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406380 irq 21
320[ 2.007251] ata7: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406400 irq 21
321[ 2.008031] ata8: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406480 irq 21
322[ 2.008655] ata9: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406500 irq 21
323[ 2.009279] ata10: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406580 irq 21
324[ 2.009905] ata11: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406600 irq 21
325[ 2.013384] tun: Universal TUN/TAP device driver, 1.6
326[ 2.013803] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
327[ 2.014605] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
328[ 2.015048] e1000: Copyright (c) 1999-2006 Intel Corporation.
329[ 2.015615] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
330[ 2.016027] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
331[ 2.016900] PPP generic driver version 2.4.2
332[ 2.017880] PPP BSD Compression module registered
333[ 2.018726] PPP Deflate Compression module registered
334[ 2.020712] PPP MPPE Compression module registered
335[ 2.021113] NET: Registered protocol family 24
336[ 2.021886] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
337[ 2.022352] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
338[ 2.022814] ehci_hcd 0000:00:0b.0: setting latency timer to 64
339[ 2.022821] ehci_hcd 0000:00:0b.0: EHCI Host Controller
340[ 2.023488] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
341[ 2.026240] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0405000
342[ 2.034468] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
343[ 2.035517] hub 1-0:1.0: USB hub found
344[ 2.035872] hub 1-0:1.0: 8 ports detected
345[ 2.036492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
346[ 2.036936] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
347[ 2.037543] ohci_hcd 0000:00:06.0: setting latency timer to 64
348[ 2.037550] ohci_hcd 0000:00:06.0: OHCI Host Controller
349[ 2.038738] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
350[ 2.039415] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000
351[ 2.092417] hub 2-0:1.0: USB hub found
352[ 2.092793] hub 2-0:1.0: 8 ports detected
353[ 2.093527] Initializing USB Mass Storage driver...
354[ 2.094275] usbcore: registered new interface driver usb-storage
355[ 2.094705] USB Mass Storage support registered.
356[ 2.095419] usbcore: registered new interface driver usbserial
357[ 2.095982] USB Serial support registered for generic
358[ 2.096523] usbcore: registered new interface driver usbserial_generic
359[ 2.096958] usbserial: USB Serial Driver core
360[ 2.098212] USB Serial support registered for DeLorme Earthmate USB
361[ 2.098852] USB Serial support registered for HID->COM RS232 Adapter
362[ 2.099467] USB Serial support registered for Nokia CA-42 V2 Adapter
363[ 2.100088] usbcore: registered new interface driver cypress
364[ 2.100493] cypress_m8: v1.10:Cypress USB to Serial Driver
365[ 2.101356] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
366[ 2.102668] serio: i8042 KBD port at 0x60,0x64 irq 1
367[ 2.103074] serio: i8042 AUX port at 0x60,0x64 irq 12
368[ 2.104385] mousedev: PS/2 mouse device common for all mice
369[ 2.105686] i2c /dev entries driver
370[ 2.106490] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
371[ 2.107699] lirc_dev: IR Remote Control driver registered, major 251
372[ 2.107701] IR NEC protocol handler initialized
373[ 2.107702] IR RC5(x) protocol handler initialized
374[ 2.107703] IR RC6 protocol handler initialized
375[ 2.107703] IR JVC protocol handler initialized
376[ 2.107704] IR Sony protocol handler initialized
377[ 2.107705] IR RC5 (streamzap) protocol handler initialized
378[ 2.107706] IR MCE Keyboard/mouse protocol handler initialized
379[ 2.107707] IR LIRC bridge handler initialized
380[ 2.107998] usbcore: registered new interface driver mceusb
381[ 2.107999] Linux video capture interface: v2.00
382[ 2.108397] md: raid0 personality registered for level 0
383[ 2.108399] md: raid1 personality registered for level 1
384[ 2.108400] md: raid10 personality registered for level 10
385[ 2.108402] md: raid6 personality registered for level 6
386[ 2.108403] md: raid5 personality registered for level 5
387[ 2.108404] md: raid4 personality registered for level 4
388[ 2.108405] md: faulty personality registered for level -5
389[ 2.109210] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
390[ 2.109887] cpuidle: using governor ladder
391[ 2.112014] usbcore: registered new interface driver usbhid
392[ 2.112016] usbhid: USB HID core driver
393[ 2.112137] IPv4 over IPv4 tunneling driver
394[ 2.113293] TCP cubic registered
395[ 2.113295] Initializing XFRM netlink socket
396[ 2.113298] NET: Registered protocol family 17
397[ 2.113308] NET: Registered protocol family 15
398[ 2.113335] Bridge firewalling registered
399[ 2.113351] Registering the dns_resolver key type
400[ 2.114586] registered taskstats version 1
401[ 2.330704] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
402[ 2.331245] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
403[ 2.331661] ata1.00: 204800 sectors, multi 128: LBA48 NCQ (depth 31/32)
404[ 2.332175] ata1.00: configured for UDMA/133
405[ 2.332784] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
406[ 2.334289] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (104 MB/100 MiB)
407[ 2.334999] sd 0:0:0:0: Attached scsi generic sg0 type 0
408[ 2.336693] sd 0:0:0:0: [sda] Write Protect is off
409[ 2.337073] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
410[ 2.337373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
411[ 2.350040] sda: sda1
412[ 2.351331] sd 0:0:0:0: [sda] Attached SCSI disk
413[ 2.477736] usb 2-1: new full-speed USB device number 2 using ohci_hcd
414[ 2.654540] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
415[ 2.655563] ata2.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
416[ 2.655950] ata2.00: 156301488 sectors, multi 128: LBA48 NCQ (depth 31/32)
417[ 2.656506] ata2.00: configured for UDMA/133
418[ 2.657258] scsi 1:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
419[ 2.658594] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
420[ 2.659023] sd 1:0:0:0: Attached scsi generic sg1 type 0
421[ 2.660445] sd 1:0:0:0: [sdb] Write Protect is off
422[ 2.661013] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
423[ 2.661538] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
424[ 2.673612] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
425[ 2.675628] sd 1:0:0:0: [sdb] Attached SCSI disk
426[ 2.713847] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input3
427[ 2.715476] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
428[ 2.977408] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
429[ 2.977997] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
430[ 2.978408] ata3.00: applying bridge limits
431[ 2.978907] ata3.00: configured for UDMA/100
432[ 2.979613] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
433[ 2.981161] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
434[ 2.981562] cdrom: Uniform CD-ROM driver Revision: 3.20
435[ 2.982441] sr 2:0:0:0: Attached scsi CD-ROM sr0
436[ 2.982943] sr 2:0:0:0: Attached scsi generic sg2 type 5
437[ 3.304393] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
438[ 3.304892] ata4.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
439[ 3.305298] ata4.00: 1953525168 sectors, multi 128: LBA48 NCQ (depth 31/32)
440[ 3.305774] ata4.00: configured for UDMA/133
441[ 3.306525] scsi 3:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
442[ 3.307995] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
443[ 3.308486] sd 3:0:0:0: Attached scsi generic sg3 type 0
444[ 3.310108] sd 3:0:0:0: [sdc] Write Protect is off
445[ 3.310519] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
446[ 3.310721] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
447[ 3.339627] sdc: sdc1 sdc2 sdc4 < sdc5 sdc6 sdc7 sdc8 >
448[ 3.342675] sd 3:0:0:0: [sdc] Attached SCSI disk
449[ 3.627635] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
450[ 3.628178] ata5.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
451[ 3.628581] ata5.00: 1953525168 sectors, multi 128: LBA48 NCQ (depth 31/32)
452[ 3.629092] ata5.00: configured for UDMA/133
453[ 3.629772] scsi 4:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
454[ 3.631172] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
455[ 3.631710] sd 4:0:0:0: Attached scsi generic sg4 type 0
456[ 3.633334] sd 4:0:0:0: [sdd] Write Protect is off
457[ 3.633718] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
458[ 3.633866] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
459[ 3.653367] sdd: sdd1 sdd2 sdd4 < sdd5 sdd6 sdd7 sdd8 >
460[ 3.655939] sd 4:0:0:0: [sdd] Attached SCSI disk
461[ 3.950632] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
462[ 3.951176] ata6.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
463[ 3.951589] ata6.00: 1953525168 sectors, multi 128: LBA48 NCQ (depth 31/32)
464[ 3.952068] ata6.00: configured for UDMA/133
465[ 3.952704] scsi 5:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
466[ 3.954242] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
467[ 3.954761] sd 5:0:0:0: Attached scsi generic sg5 type 0
468[ 3.956480] sd 5:0:0:0: [sde] Write Protect is off
469[ 3.956866] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
470[ 3.956983] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
471[ 3.988034] sde: sde1 sde2 sde4 < sde5 sde6 sde7 sde8 >
472[ 3.990894] sd 5:0:0:0: [sde] Attached SCSI disk
473[ 4.274642] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
474[ 4.275201] ata7.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
475[ 4.275644] ata7.00: 1953525168 sectors, multi 128: LBA48 NCQ (depth 31/32)
476[ 4.276127] ata7.00: configured for UDMA/133
477[ 4.276892] scsi 6:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
478[ 4.277846] sd 6:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
479[ 4.278297] sd 6:0:0:0: Attached scsi generic sg6 type 0
480[ 4.279855] sd 6:0:0:0: [sdf] Write Protect is off
481[ 4.280238] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
482[ 4.280430] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
483[ 4.311729] sdf: sdf1 sdf2 sdf4 < sdf5 sdf6 sdf7 sdf8 >
484[ 4.314551] sd 6:0:0:0: [sdf] Attached SCSI disk
485[ 4.597418] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
486[ 4.598396] ata8.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
487[ 4.599160] ata8.00: 1953525168 sectors, multi 128: LBA48 NCQ (depth 31/32)
488[ 4.600081] ata8.00: configured for UDMA/133
489[ 4.601182] scsi 7:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
490[ 4.604447] sd 7:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
491[ 4.605258] sd 7:0:0:0: Attached scsi generic sg7 type 0
492[ 4.608225] sd 7:0:0:0: [sdg] Write Protect is off
493[ 4.608947] sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
494[ 4.609148] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
495[ 4.649752] sdg: sdg1 sdg2 sdg4 < sdg5 sdg6 sdg7 sdg8 >
496[ 4.654165] sd 7:0:0:0: [sdg] Attached SCSI disk
497[ 4.924235] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
498[ 4.925226] ata9.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
499[ 4.926493] ata9.00: 1953525168 sectors, multi 128: LBA48 NCQ (depth 31/32)
500[ 4.927430] ata9.00: configured for UDMA/133
501[ 4.928494] scsi 8:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
502[ 4.931015] sd 8:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
503[ 4.932690] sd 8:0:0:0: [sdh] Write Protect is off
504[ 4.933447] sd 8:0:0:0: [sdh] Mode Sense: 00 3a 00 00
505[ 4.933742] sd 8:0:0:0: Attached scsi generic sg8 type 0
506[ 4.933768] sd 8:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
507[ 4.962155] sdh: sdh1 sdh2 sdh4 < sdh5 sdh6 sdh7 sdh8 >
508[ 4.967541] sd 8:0:0:0: [sdh] Attached SCSI disk
509[ 5.257345] ata10: SATA link down (SStatus 0 SControl 300)
510[ 5.577566] ata11: SATA link down (SStatus 0 SControl 300)
511[ 5.580240] Freeing unused kernel memory: 568k freed
512[ 5.581426] Write protecting the kernel read-only data: 12288k
513[ 5.588396] Freeing unused kernel memory: 1392k freed
514[ 5.598057] Freeing unused kernel memory: 1872k freed
515[ 5.626914] SPL: Loaded module v0.6.0-rc8, using hostid 0x00000000
516[ 5.627887] znvpair: module license 'CDDL' taints kernel.
517[ 5.628290] Disabling lock debugging due to kernel taint
518[ 5.678550] ZFS: Loaded module v0.6.0-rc8, ZFS pool version 28, ZFS filesystem version 5
519[ 5.690047] SPLAT: Loaded module v0.6.0-rc8
520[ 5.697613] mdadm: sending ioctl 1261 to a partition!
521[ 5.698018] mdadm: sending ioctl 1261 to a partition!
522[ 5.710418] mdadm: sending ioctl 1261 to a partition!
523[ 5.710849] mdadm: sending ioctl 1261 to a partition!
524[ 5.711427] mdadm: sending ioctl 1261 to a partition!
525[ 5.711815] mdadm: sending ioctl 1261 to a partition!
526[ 5.713016] mdadm: sending ioctl 1261 to a partition!
527[ 5.713405] mdadm: sending ioctl 1261 to a partition!
528[ 5.714107] mdadm: sending ioctl 800c0910 to a partition!
529[ 5.714486] mdadm: sending ioctl 800c0910 to a partition!
530[ 6.413273] md: md5 stopped.
531[ 6.420047] md: bind<sde5>
532[ 6.421100] md: bind<sdg5>
533[ 6.422079] md: bind<sdf5>
534[ 6.423041] md: bind<sdh5>
535[ 6.424126] md: bind<sdc5>
536[ 6.425098] md: bind<sdd5>
537[ 6.432705] bio: create slab <bio-1> at 1
538[ 6.433349] md/raid:md5: device sdd5 operational as raid disk 0
539[ 6.434363] md/raid:md5: device sdc5 operational as raid disk 5
540[ 6.435167] md/raid:md5: device sdh5 operational as raid disk 4
541[ 6.435948] md/raid:md5: device sdf5 operational as raid disk 3
542[ 6.436726] md/raid:md5: device sdg5 operational as raid disk 2
543[ 6.437286] md/raid:md5: device sde5 operational as raid disk 1
544[ 6.442256] md/raid:md5: allocated 6370kB
545[ 6.442817] md/raid:md5: raid level 6 active with 6 out of 6 devices, algorithm 2
546[ 6.443451] RAID conf printout:
547[ 6.443453] --- level:6 rd:6 wd:6
548[ 6.443455] disk 0, o:1, dev:sdd5
549[ 6.443456] disk 1, o:1, dev:sde5
550[ 6.443457] disk 2, o:1, dev:sdg5
551[ 6.443458] disk 3, o:1, dev:sdf5
552[ 6.443459] disk 4, o:1, dev:sdh5
553[ 6.443460] disk 5, o:1, dev:sdc5
554[ 6.443826] created bitmap (2 pages) for device md5
555[ 6.444487] md5: bitmap initialized from disk: read 1/1 pages, set 0 of 3643 bits
556[ 6.448398] md5: detected capacity change from 0 to 977656348672
557[ 6.450160] md5: unknown partition table
558[ 6.617361] md: md6 stopped.
559[ 6.622302] md: bind<sde6>
560[ 6.623012] md: bind<sdg6>
561[ 6.623690] md: bind<sdf6>
562[ 6.624410] md: bind<sdh6>
563[ 6.625172] md: bind<sdc6>
564[ 6.625918] md: bind<sdd6>
565[ 6.627029] md/raid:md6: device sdd6 operational as raid disk 0
566[ 6.627588] md/raid:md6: device sdc6 operational as raid disk 5
567[ 6.628095] md/raid:md6: device sdh6 operational as raid disk 4
568[ 6.628609] md/raid:md6: device sdf6 operational as raid disk 3
569[ 6.629692] md/raid:md6: device sdg6 operational as raid disk 2
570[ 6.630337] md/raid:md6: device sde6 operational as raid disk 1
571[ 6.632314] md/raid:md6: allocated 6370kB
572[ 6.633000] md/raid:md6: raid level 6 active with 6 out of 6 devices, algorithm 2
573[ 6.633968] RAID conf printout:
574[ 6.633970] --- level:6 rd:6 wd:6
575[ 6.633972] disk 0, o:1, dev:sdd6
576[ 6.633974] disk 1, o:1, dev:sde6
577[ 6.633975] disk 2, o:1, dev:sdg6
578[ 6.633977] disk 3, o:1, dev:sdf6
579[ 6.633978] disk 4, o:1, dev:sdh6
580[ 6.633980] disk 5, o:1, dev:sdc6
581[ 6.634293] created bitmap (2 pages) for device md6
582[ 6.635143] md6: bitmap initialized from disk: read 1/1 pages, set 0 of 3643 bits
583[ 6.637845] md6: detected capacity change from 0 to 977656348672
584[ 6.639900] md6: unknown partition table
585[ 6.691036] md: md7 stopped.
586[ 6.695336] md: bind<sde7>
587[ 6.695896] md: bind<sdg7>
588[ 6.696487] md: bind<sdf7>
589[ 6.697007] md: bind<sdh7>
590[ 6.697620] md: bind<sdc7>
591[ 6.698190] md: bind<sdd7>
592[ 6.699192] md/raid:md7: device sdd7 operational as raid disk 0
593[ 6.699612] md/raid:md7: device sdc7 operational as raid disk 5
594[ 6.700030] md/raid:md7: device sdh7 operational as raid disk 4
595[ 6.700503] md/raid:md7: device sdf7 operational as raid disk 3
596[ 6.701297] md/raid:md7: device sdg7 operational as raid disk 2
597[ 6.701714] md/raid:md7: device sde7 operational as raid disk 1
598[ 6.702384] md/raid:md7: allocated 6370kB
599[ 6.702913] md/raid:md7: raid level 6 active with 6 out of 6 devices, algorithm 2
600[ 6.703557] RAID conf printout:
601[ 6.703558] --- level:6 rd:6 wd:6
602[ 6.703559] disk 0, o:1, dev:sdd7
603[ 6.703561] disk 1, o:1, dev:sde7
604[ 6.703562] disk 2, o:1, dev:sdg7
605[ 6.703563] disk 3, o:1, dev:sdf7
606[ 6.703568] disk 4, o:1, dev:sdh7
607[ 6.703572] disk 5, o:1, dev:sdc7
608[ 6.703794] created bitmap (2 pages) for device md7
609[ 6.704441] md7: bitmap initialized from disk: read 1/1 pages, set 0 of 3643 bits
610[ 6.706868] md7: detected capacity change from 0 to 977656348672
611[ 6.708627] md7: unknown partition table
612[ 6.920444] md: md8 stopped.
613[ 6.928377] md: bind<sdg8>
614[ 6.929337] md: bind<sdf8>
615[ 6.930368] md: bind<sdh8>
616[ 6.931351] md: bind<sdd8>
617[ 6.932290] md: bind<sdc8>
618[ 6.933176] md: bind<sde8>
619[ 6.934996] md/raid:md8: device sde8 operational as raid disk 0
620[ 6.935772] md/raid:md8: device sdc8 operational as raid disk 5
621[ 6.936563] md/raid:md8: device sdd8 operational as raid disk 4
622[ 6.937383] md/raid:md8: device sdh8 operational as raid disk 3
623[ 6.938212] md/raid:md8: device sdf8 operational as raid disk 2
624[ 6.938964] md/raid:md8: device sdg8 operational as raid disk 1
625[ 6.941971] md/raid:md8: allocated 6370kB
626[ 6.942926] md/raid:md8: raid level 6 active with 6 out of 6 devices, algorithm 2
627[ 6.944882] RAID conf printout:
628[ 6.944885] --- level:6 rd:6 wd:6
629[ 6.944889] disk 0, o:1, dev:sde8
630[ 6.944891] disk 1, o:1, dev:sdg8
631[ 6.944894] disk 2, o:1, dev:sdf8
632[ 6.944896] disk 3, o:1, dev:sdh8
633[ 6.944898] disk 4, o:1, dev:sdd8
634[ 6.944900] disk 5, o:1, dev:sdc8
635[ 6.945222] created bitmap (2 pages) for device md8
636[ 6.946244] md8: bitmap initialized from disk: read 1/1 pages, set 0 of 3643 bits
637[ 6.949205] md8: detected capacity change from 0 to 977656348672
638[ 7.043868] md8: unknown partition table
639[ 36.206071] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: user_xattr
640[ 39.844451] udevd[5449]: starting version 171
641[ 40.389848] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
642[ 40.397329] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
643[ 40.414271] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
644[ 40.414330] virtio-pci 0000:00:03.0: setting latency timer to 64
645[ 40.414497] virtio-pci 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
646[ 40.414525] virtio-pci 0000:00:08.0: setting latency timer to 64
647[ 40.414829] virtio-pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
648[ 40.414863] virtio-pci 0000:00:09.0: setting latency timer to 64
649[ 40.417709] input: Unspecified device as /devices/virtual/input/input5
650[ 40.419371] vboxguest: major 0, IRQ 20, I/O port d020, MMIO at 00000000f0000000 (size 0x400000)
651[ 40.419375] vboxguest: Successfully loaded version 4.1.14 (interface 0x00010004)
652[ 40.491586] udevd[5468]: renamed network interface eth1 to rename4
653[ 40.511535] udevd[5464]: renamed network interface eth2 to eth1
654[ 40.554823] udevd[5468]: renamed network interface rename4 to eth2
655[ 40.562702] scsi_verify_blk_ioctl: 1058 callbacks suppressed
656[ 40.562707] mdadm: sending ioctl 1261 to a partition!
657[ 40.562709] mdadm: sending ioctl 1261 to a partition!
658[ 40.562764] mdadm: sending ioctl 1261 to a partition!
659[ 40.562769] mdadm: sending ioctl 1261 to a partition!
660[ 40.562891] mdadm: sending ioctl 1261 to a partition!
661[ 40.562896] mdadm: sending ioctl 1261 to a partition!
662[ 40.563958] mdadm: sending ioctl 1261 to a partition!
663[ 40.563961] mdadm: sending ioctl 1261 to a partition!
664[ 41.628020] mdadm: sending ioctl 1261 to a partition!
665[ 41.628025] mdadm: sending ioctl 1261 to a partition!
666[ 44.916331] ip_tables: (C) 2000-2006 Netfilter Core Team
667[ 44.953801] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
668[ 45.330132] scsi11 : vhba
669[ 68.048313] EXT4-fs (dm-10): re-mounted. Opts: user_xattr
670[ 68.449827] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: user_xattr
671[ 68.589833] REISERFS (device dm-13): found reiserfs format "3.6" with standard journal
672[ 68.589860] REISERFS (device dm-13): using ordered data mode
673[ 68.589862] reiserfs: using flush barriers
674[ 68.590386] REISERFS (device dm-13): journal params: device dm-13, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
675[ 68.591028] REISERFS (device dm-13): checking transaction log (dm-13)
676[ 68.712577] REISERFS (device dm-13): Using r5 hash to sort names
677[ 68.854265] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
678[ 68.896761] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
679[ 69.007910] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
680[ 69.130249] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
681[ 69.160444] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
682[ 69.191482] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
683[ 69.268554] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
684[ 69.291022] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
685[ 69.773125] Adding 1044220k swap on /dev/sdc1. Priority:0 extents:1 across:1044220k
686[ 69.889224] Adding 1044220k swap on /dev/sde1. Priority:0 extents:1 across:1044220k
687[ 69.967630] Adding 1044220k swap on /dev/sdg1. Priority:0 extents:1 across:1044220k
688[ 70.285223] Adding 1044220k swap on /dev/sdd1. Priority:0 extents:1 across:1044220k
689[ 70.385599] Adding 1044220k swap on /dev/sdf1. Priority:0 extents:1 across:1044220k
690[ 70.458120] Adding 1044220k swap on /dev/sdh1. Priority:0 extents:1 across:1044220k
691[ 77.628231] vboxsf: Successfully loaded version 4.1.14 (interface 0x00010004)
692[ 77.700901] iSCSI Enterprise Target Software - version trunk
693[ 77.700970] iscsi_trgt: Registered io type fileio
694[ 77.700972] iscsi_trgt: Registered io type blockio
695[ 77.700973] iscsi_trgt: Registered io type nullio
696[ 87.151407] u32 classifier
697[ 87.151409] Performance counters on
698[ 87.151410] input device check on
699[ 87.151411] Actions configured
700[ 124.476324] ata1.00: configured for UDMA/133
701[ 124.476327] ata1: EH complete
702[ 124.478950] ata2.00: configured for UDMA/133
703[ 124.478953] ata2: EH complete
704[ 124.593749] ata4.00: configured for UDMA/133
705[ 124.593755] ata4: EH complete
706[ 124.613887] ata5.00: configured for UDMA/133
707[ 124.613892] ata5: EH complete
708[ 124.627779] ata6.00: configured for UDMA/133
709[ 124.627782] ata6: EH complete
710[ 124.630065] ata7.00: configured for UDMA/133
711[ 124.630067] ata7: EH complete
712[ 124.632305] ata8.00: configured for UDMA/133
713[ 124.632309] ata8: EH complete
714[ 124.635048] ata9.00: configured for UDMA/133
715[ 124.635051] ata9: EH complete
716[ 125.148328] EXT4-fs (dm-10): re-mounted. Opts: user_xattr,commit=0
717[ 127.012877] EXT4-fs (dm-9): re-mounted. Opts: user_xattr,commit=0
718[ 128.030436] EXT4-fs (dm-8): re-mounted. Opts: commit=0
719[ 128.036456] EXT4-fs (dm-7): re-mounted. Opts: commit=0
720[ 128.343134] EXT4-fs (dm-3): re-mounted. Opts: commit=0
721[ 128.439565] EXT4-fs (dm-5): re-mounted. Opts: commit=0
722[ 129.191318] EXT4-fs (dm-1): re-mounted. Opts: commit=0
723[ 129.229344] EXT4-fs (dm-2): re-mounted. Opts: commit=0
724[ 129.231758] EXT4-fs (dm-6): re-mounted. Opts: commit=0
725[ 129.277739] EXT4-fs (dm-4): re-mounted. Opts: commit=0
726[33007.702081] scsi_verify_blk_ioctl: 382 callbacks suppressed
727[33007.702081] mdadm: sending ioctl 1261 to a partition!
728[33007.702081] mdadm: sending ioctl 1261 to a partition!
729[33007.791699] mdadm: sending ioctl 1261 to a partition!
730[33007.791702] mdadm: sending ioctl 1261 to a partition!
731[33008.221349] mdadm: sending ioctl 1261 to a partition!
732[33008.221353] mdadm: sending ioctl 1261 to a partition!
733[33008.706578] mdadm: sending ioctl 1261 to a partition!
734[33008.706582] mdadm: sending ioctl 1261 to a partition!
735[86442.095237] ata5.00: exception Emask 0x0 SAct 0x8001 SErr 0x0 action 0x6 frozen
736[86442.095241] ata5.00: failed command: READ FPDMA QUEUED
737[86442.095246] ata5.00: cmd 60/60:00:ae:90:9b/00:00:64:00:00/40 tag 0 ncq 49152 in
738[86442.095247] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
739[86442.095249] ata5.00: status: { DRDY }
740[86442.095250] ata5.00: failed command: READ FPDMA QUEUED
741[86442.095253] ata5.00: cmd 60/08:78:ad:c3:bf/00:00:0e:00:00/40 tag 15 ncq 4096 in
742[86442.095254] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
743[86442.095256] ata5.00: status: { DRDY }
744[86442.095261] ata5: hard resetting link
745[86442.105019] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
746[86442.105022] ata8.00: failed command: READ FPDMA QUEUED
747[86442.105026] ata8.00: cmd 60/20:00:8e:90:9b/00:00:64:00:00/40 tag 0 ncq 16384 in
748[86442.105027] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
749[86442.105029] ata8.00: status: { DRDY }
750[86442.105035] ata8: hard resetting link
751[86442.105139] ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
752[86442.105144] ata9.00: failed command: READ FPDMA QUEUED
753[86442.105147] ata9.00: cmd 60/80:00:ae:90:9b/00:00:64:00:00/40 tag 0 ncq 65536 in
754[86442.105148] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
755[86442.105150] ata9.00: status: { DRDY }
756[86442.105155] ata9: hard resetting link
757[86442.415042] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
758[86442.415210] ata5.00: configured for UDMA/133
759[86442.415264] ata5.00: device reported invalid CHS sector 0
760[86442.415267] ata5.00: device reported invalid CHS sector 0
761[86442.415273] ata5: EH complete
762[86442.425869] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
763[86442.426067] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
764[86442.426315] ata8.00: configured for UDMA/133
765[86442.426357] ata8.00: device reported invalid CHS sector 0
766[86442.426363] ata8: EH complete
767[86442.426479] ata9.00: configured for UDMA/133
768[86442.426529] ata9.00: device reported invalid CHS sector 0
769[86442.426538] ata9: EH complete
770[86451.728897] ata5: illegal qc_active transition (00000003->00008002)
771[86451.728960] ata5.00: exception Emask 0x2 SAct 0x3 SErr 0x0 action 0x6 frozen
772[86451.728963] ata5.00: failed command: READ FPDMA QUEUED
773[86451.728967] ata5.00: cmd 60/08:00:ad:c3:bf/00:00:0e:00:00/40 tag 0 ncq 4096 in
774[86451.728968] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
775[86451.728970] ata5.00: status: { DRDY }
776[86451.728972] ata5.00: failed command: READ FPDMA QUEUED
777[86451.728975] ata5.00: cmd 60/60:08:ae:90:9b/00:00:64:00:00/40 tag 1 ncq 49152 in
778[86451.728975] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
779[86451.728977] ata5.00: status: { DRDY }
780[86451.728982] ata5: hard resetting link
781[86452.048534] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
782[86452.048689] ata5.00: configured for UDMA/133
783[86452.048743] ata5: EH complete
784[86452.068522] ata5: illegal qc_active transition (00000003->00008002)
785[86452.068570] ata5.00: exception Emask 0x2 SAct 0x3 SErr 0x0 action 0x6 frozen
786[86452.068581] ata5.00: failed command: READ FPDMA QUEUED
787[86452.068592] ata5.00: cmd 60/60:00:ae:90:9b/00:00:64:00:00/40 tag 0 ncq 49152 in
788[86452.068600] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
789[86452.068609] ata5.00: status: { DRDY }
790[86452.068617] ata5.00: failed command: READ FPDMA QUEUED
791[86452.068627] ata5.00: cmd 60/08:08:ad:c3:bf/00:00:0e:00:00/40 tag 1 ncq 4096 in
792[86452.068633] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
793[86452.068640] ata5.00: status: { DRDY }
794[86452.068653] ata5: hard resetting link
795[86452.388575] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
796[86452.388769] ata5.00: configured for UDMA/133
797[86452.388810] ata5: EH complete
798[86452.389064] ata5: illegal qc_active transition (00000003->00008000)
799[86452.389086] ata5.00: NCQ disabled due to excessive errors
800[86452.389088] ata5.00: exception Emask 0x2 SAct 0x3 SErr 0x0 action 0x6 frozen
801[86452.389091] ata5.00: failed command: READ FPDMA QUEUED
802[86452.389095] ata5.00: cmd 60/08:00:ad:c3:bf/00:00:0e:00:00/40 tag 0 ncq 4096 in
803[86452.389096] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
804[86452.389098] ata5.00: status: { DRDY }
805[86452.389099] ata5.00: failed command: READ FPDMA QUEUED
806[86452.389102] ata5.00: cmd 60/60:08:ae:90:9b/00:00:64:00:00/40 tag 1 ncq 49152 in
807[86452.389103] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
808[86452.389105] ata5.00: status: { DRDY }
809[86452.389109] ata5: hard resetting link
810[86452.707733] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
811[86452.707951] ata5.00: configured for UDMA/133
812[86452.708038] ata5: EH complete

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy