| 1 | [ 0.000000] Linux version 2.6.32.9 (machine@machine-desktop) (gcc version 4.3.4 (Buildroot 2010.02) ) #78 Thu Oct 14 07:47:40 CEST 2010
|
|---|
| 2 | [ 0.000000] KERNEL supported cpus:
|
|---|
| 3 | [ 0.000000] Intel GenuineIntel
|
|---|
| 4 | [ 0.000000] BIOS-provided physical RAM map:
|
|---|
| 5 | [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
|
|---|
| 6 | [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
|
|---|
| 7 | [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
|
|---|
| 8 | [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
|
|---|
| 9 | [ 0.000000] BIOS-e820: 000000002fff0000 - 0000000030000000 (ACPI data)
|
|---|
| 10 | [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
|
|---|
| 11 | [ 0.000000] last_pfn = 0x2fff0 max_arch_pfn = 0x100000
|
|---|
| 12 | [ 0.000000] initial memory mapped : 0 - 00c00000
|
|---|
| 13 | [ 0.000000] init_memory_mapping: 0000000000000000-000000002fff0000
|
|---|
| 14 | [ 0.000000] 0000000000 - 0000400000 page 4k
|
|---|
| 15 | [ 0.000000] 0000400000 - 002fc00000 page 2M
|
|---|
| 16 | [ 0.000000] 002fc00000 - 002fff0000 page 4k
|
|---|
| 17 | [ 0.000000] kernel direct mapping tables up to 2fff0000 @ 7000-c000
|
|---|
| 18 | [ 0.000000] 767MB LOWMEM available.
|
|---|
| 19 | [ 0.000000] mapped low ram: 0 - 2fff0000
|
|---|
| 20 | [ 0.000000] low ram: 0 - 2fff0000
|
|---|
| 21 | [ 0.000000] node 0 low ram: 00000000 - 2fff0000
|
|---|
| 22 | [ 0.000000] node 0 bootmap 00001000 - 00007000
|
|---|
| 23 | [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 002fff0000]
|
|---|
| 24 | [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
|
|---|
| 25 | [ 0.000000] #1 [0000100000 - 00007deb98] TEXT DATA BSS ==> [0000100000 - 00007deb98]
|
|---|
| 26 | [ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
|
|---|
| 27 | [ 0.000000] #3 [00007df000 - 00007e2000] BRK ==> [00007df000 - 00007e2000]
|
|---|
| 28 | [ 0.000000] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
|
|---|
| 29 | [ 0.000000] #5 [0000001000 - 0000007000] BOOTMAP ==> [0000001000 - 0000007000]
|
|---|
| 30 | [ 0.000000] Zone PFN ranges:
|
|---|
| 31 | [ 0.000000] DMA 0x00000000 -> 0x00001000
|
|---|
| 32 | [ 0.000000] Normal 0x00001000 -> 0x0002fff0
|
|---|
| 33 | [ 0.000000] Movable zone start PFN for each node
|
|---|
| 34 | [ 0.000000] early_node_map[2] active PFN ranges
|
|---|
| 35 | [ 0.000000] 0: 0x00000000 -> 0x0000009f
|
|---|
| 36 | [ 0.000000] 0: 0x00000100 -> 0x0002fff0
|
|---|
| 37 | [ 0.000000] On node 0 totalpages: 196495
|
|---|
| 38 | [ 0.000000] free_area_init_node: node 0, pgdat c0374d84, node_mem_map c1000000
|
|---|
| 39 | [ 0.000000] DMA zone: 32 pages used for memmap
|
|---|
| 40 | [ 0.000000] DMA zone: 0 pages reserved
|
|---|
| 41 | [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
|
|---|
| 42 | [ 0.000000] Normal zone: 1504 pages used for memmap
|
|---|
| 43 | [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
|
|---|
| 44 | [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cffc0000)
|
|---|
| 45 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194959
|
|---|
| 46 | [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,1)/boot/bzImage ro quiet noapic consoleblank=0
|
|---|
| 47 | [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
|
|---|
| 48 | [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
|
|---|
| 49 | [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
|
|---|
| 50 | [ 0.000000] Enabling fast FPU save and restore... done.
|
|---|
| 51 | [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
|
|---|
| 52 | [ 0.000000] Initializing CPU#0
|
|---|
| 53 | [ 0.000000] Memory: 771820k/786368k available (2001k kernel code, 13992k reserved, 525k data, 4392k init, 0k highmem)
|
|---|
| 54 | [ 0.000000] virtual kernel memory layout:
|
|---|
| 55 | [ 0.000000] fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB)
|
|---|
| 56 | [ 0.000000] vmalloc : 0xf07f0000 - 0xfffe3000 ( 247 MB)
|
|---|
| 57 | [ 0.000000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
|
|---|
| 58 | [ 0.000000] .init : 0xc0378000 - 0xc07c2000 (4392 kB)
|
|---|
| 59 | [ 0.000000] .data : 0xc02f46a3 - 0xc0377dc8 ( 525 kB)
|
|---|
| 60 | [ 0.000000] .text : 0xc0100000 - 0xc02f46a3 (2001 kB)
|
|---|
| 61 | [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
|
|---|
| 62 | [ 0.000000] Hierarchical RCU implementation.
|
|---|
| 63 | [ 0.000000] NR_IRQS:16
|
|---|
| 64 | [ 0.000000] Console: colour VGA+ 80x25
|
|---|
| 65 | [ 0.000000] console [tty0] enabled
|
|---|
| 66 | [ 0.000000] Fast TSC calibration failed
|
|---|
| 67 | [ 0.000000] TSC: Unable to calibrate against PIT
|
|---|
| 68 | [ 0.000000] TSC: No reference (HPET/PMTIMER) available
|
|---|
| 69 | [ 0.000000] Marking TSC unstable due to could not calculate TSC khz
|
|---|
| 70 | [ 0.040000] Calibrating delay loop... 6330.77 BogoMIPS (lpj=31653888)
|
|---|
| 71 | [ 0.280000] Mount-cache hash table entries: 512
|
|---|
| 72 | [ 0.280000] , L1 D cache: 32K
|
|---|
| 73 | [ 0.280000] CPU: L2 cache: 6144K
|
|---|
| 74 | [ 0.280000] using mwait in idle threads.
|
|---|
| 75 | [ 0.280000] CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
|
|---|
| 76 | [ 0.280000] Checking 'hlt' instruction... OK.
|
|---|
| 77 | [ 0.320000] NET: Registered protocol family 16
|
|---|
| 78 | [ 0.320000] PCI: PCI BIOS revision 2.10 entry at 0xfc130, last bus=0
|
|---|
| 79 | [ 0.320000] bio: create slab <bio-0> at 0
|
|---|
| 80 | [ 0.320000] vgaarb: loaded
|
|---|
| 81 | [ 0.320000] SCSI subsystem initialized
|
|---|
| 82 | [ 0.320000] libata version 3.00 loaded.
|
|---|
| 83 | [ 0.320000] usbcore: registered new interface driver usbfs
|
|---|
| 84 | [ 0.320000] usbcore: registered new interface driver hub
|
|---|
| 85 | [ 0.320000] usbcore: registered new device driver usb
|
|---|
| 86 | [ 0.320000] PCI: Probing PCI hardware
|
|---|
| 87 | [ 0.320000] PCI: Probing PCI hardware (bus 00)
|
|---|
| 88 | [ 0.330000] pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f]
|
|---|
| 89 | [ 0.330000] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe0ffffff]
|
|---|
| 90 | [ 0.340000] pci 0000:00:03.0: reg 10 32bit mmio: [0xf0000000-0xf001ffff]
|
|---|
| 91 | [ 0.340000] pci 0000:00:03.0: reg 18 io port: [0xd010-0xd017]
|
|---|
| 92 | [ 0.340000] pci 0000:00:04.0: reg 10 io port: [0xd020-0xd03f]
|
|---|
| 93 | [ 0.340000] pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff]
|
|---|
| 94 | [ 0.350000] pci 0000:00:04.0: reg 18 32bit mmio pref: [0xf0800000-0xf0803fff]
|
|---|
| 95 | [ 0.350000] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff]
|
|---|
| 96 | [ 0.350000] pci 0000:00:08.0: reg 10 32bit mmio: [0xf0820000-0xf083ffff]
|
|---|
| 97 | [ 0.350000] pci 0000:00:08.0: reg 18 io port: [0xd040-0xd047]
|
|---|
| 98 | [ 0.350000] pci 0000:00:0d.0: reg 10 io port: [0xd048-0xd04f]
|
|---|
| 99 | [ 0.350000] pci 0000:00:0d.0: reg 18 io port: [0xd058-0xd05f]
|
|---|
| 100 | [ 0.350000] pci 0000:00:0d.0: reg 20 io port: [0xd070-0xd07f]
|
|---|
| 101 | [ 0.350000] pci 0000:00:0d.0: reg 24 32bit mmio: [0xf0840000-0xf0841fff]
|
|---|
| 102 | [ 0.360000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
|
|---|
| 103 | [ 0.360000] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000]
|
|---|
| 104 | [ 0.360000] Switching to clocksource pit
|
|---|
| 105 | [ 0.370088] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
|
|---|
| 106 | [ 0.370088] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
|
|---|
| 107 | [ 0.370088] NET: Registered protocol family 2
|
|---|
| 108 | [ 0.370088] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
|
|---|
| 109 | [ 0.370088] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
|
|---|
| 110 | [ 0.376427] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
|
|---|
| 111 | [ 0.376427] TCP: Hash tables configured (established 131072 bind 65536)
|
|---|
| 112 | [ 0.376427] TCP reno registered
|
|---|
| 113 | [ 0.376427] NET: Registered protocol family 1
|
|---|
| 114 | [ 0.376427] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
|
|---|
| 115 | [ 0.376427] pci 0000:00:01.0: Activating ISA DMA hang workarounds
|
|---|
| 116 | [ 0.376427] pci 0000:00:02.0: Boot video device
|
|---|
| 117 | [ 0.386422] platform rtc_cmos: registered platform RTC device (no PNP device found)
|
|---|
| 118 | [ 0.396467] Slow work thread pool: Starting up
|
|---|
| 119 | [ 0.396467] Slow work thread pool: Ready
|
|---|
| 120 | [ 0.396467] NTFS driver 2.1.29 [Flags: R/O].
|
|---|
| 121 | [ 0.396467] fuse init (API version 7.13)
|
|---|
| 122 | [ 0.396467] msgmni has been set to 1507
|
|---|
| 123 | [ 0.396467] io scheduler noop registered (default)
|
|---|
| 124 | [ 0.396467] io scheduler anticipatory registered
|
|---|
| 125 | [ 0.396467] vga16fb: initializing
|
|---|
| 126 | [ 0.396467] vga16fb: mapped to 0xc00a0000
|
|---|
| 127 | [ 0.396467] fb0: VGA16 VGA frame buffer device
|
|---|
| 128 | [ 0.396467] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
|
|---|
| 129 | [ 0.396467] loop: module loaded
|
|---|
| 130 | [ 0.396467] ahci 0000:00:0d.0: version 3.0
|
|---|
| 131 | [ 0.396467] PCI: setting IRQ 5 as level-triggered
|
|---|
| 132 | [ 0.396467] ahci 0000:00:0d.0: found PCI INT A -> IRQ 5
|
|---|
| 133 | [ 0.396467] ahci: SSS flag set, parallel bus scan disabled
|
|---|
| 134 | [ 0.396467] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
|
|---|
| 135 | [ 0.396467] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
|
|---|
| 136 | [ 0.396467] scsi0 : ahci
|
|---|
| 137 | [ 0.396467] scsi1 : ahci
|
|---|
| 138 | [ 0.406429] ata1: SATA max UDMA/133 abar m8192@0xf0840000 port 0xf0840100 irq 5
|
|---|
| 139 | [ 0.406429] ata2: SATA max UDMA/133 abar m8192@0xf0840000 port 0xf0840180 irq 5
|
|---|
| 140 | [ 0.406429] ata_piix 0000:00:01.1: version 2.13
|
|---|
| 141 | [ 0.406429] scsi2 : ata_piix
|
|---|
| 142 | [ 0.406429] scsi3 : ata_piix
|
|---|
| 143 | [ 0.406429] ata3: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
|
|---|
| 144 | [ 0.406429] ata4: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
|
|---|
| 145 | [ 0.406429] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
|
|---|
| 146 | [ 0.406429] Copyright (c) 1999-2006 Intel Corporation.
|
|---|
| 147 | [ 0.406429] PCI: setting IRQ 10 as level-triggered
|
|---|
| 148 | [ 0.406429] e1000 0000:00:03.0: found PCI INT A -> IRQ 10
|
|---|
| 149 | [ 0.946400] e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) ca:fe:ba:be:0e:01
|
|---|
| 150 | [ 0.946400] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
|
|---|
| 151 | [ 0.946400] ata3.00: 16384 sectors, multi 128: LBA
|
|---|
| 152 | [ 0.946400] ata3.01: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
|
|---|
| 153 | [ 0.946400] ata3.00: configured for UDMA/33
|
|---|
| 154 | [ 0.946400] ata3.01: configured for UDMA/33
|
|---|
| 155 | [ 1.166450] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
|
|---|
| 156 | [ 1.166450] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
|
|---|
| 157 | [ 1.166450] PCI: setting IRQ 9 as level-triggered
|
|---|
| 158 | [ 1.166450] e1000 0000:00:08.0: found PCI INT A -> IRQ 9
|
|---|
| 159 | [ 1.166450] e1000 0000:00:08.0: sharing IRQ 9 with 0000:00:04.0
|
|---|
| 160 | [ 1.666399] e1000: 0000:00:08.0: e1000_probe: (PCI:33MHz:32-bit) ca:fe:ba:be:01:01
|
|---|
| 161 | [ 1.876402] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
|
|---|
| 162 | [ 1.876402] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
|
|---|
| 163 | [ 1.876402] e1000e: Copyright (c) 1999-2008 Intel Corporation.
|
|---|
| 164 | [ 1.876402] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
|
|---|
| 165 | [ 1.876402] Copyright (c) 2007-2009 Intel Corporation.
|
|---|
| 166 | [ 1.876402] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
|
|---|
| 167 | [ 1.876402] Copyright (c) 2009 Intel Corporation.
|
|---|
| 168 | [ 1.876402] usbmon: debugfs is not available
|
|---|
| 169 | [ 1.876402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
|---|
| 170 | [ 1.876402] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
|
|---|
| 171 | [ 1.876402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
|
|---|
| 172 | [ 1.876402] ohci_hcd: block sizes: ed 64 td 64
|
|---|
| 173 | [ 1.876402] PCI: setting IRQ 11 as level-triggered
|
|---|
| 174 | [ 1.876402] ohci_hcd 0000:00:06.0: found PCI INT A -> IRQ 11
|
|---|
| 175 | [ 1.876402] ohci_hcd 0000:00:06.0: sharing IRQ 11 with 0000:00:02.0
|
|---|
| 176 | [ 1.876402] ohci_hcd 0000:00:06.0: OHCI Host Controller
|
|---|
| 177 | [ 1.876402] drivers/usb/core/inode.c: creating file 'devices'
|
|---|
| 178 | [ 1.876402] drivers/usb/core/inode.c: creating file '001'
|
|---|
| 179 | [ 1.876402] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
|
|---|
| 180 | [ 1.876402] ohci_hcd 0000:00:06.0: created debug files
|
|---|
| 181 | [ 1.876402] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
|
|---|
| 182 | [ 1.936435] ohci_hcd 0000:00:06.0: OHCI controller state
|
|---|
| 183 | [ 1.936435] ohci_hcd 0000:00:06.0: OHCI 1.0, NO legacy support registers
|
|---|
| 184 | [ 1.936435] ohci_hcd 0000:00:06.0: control 0x283 RWC HCFS=operational CBSR=3
|
|---|
| 185 | [ 1.936435] ohci_hcd 0000:00:06.0: cmdstatus 0x00000 SOC=0
|
|---|
| 186 | [ 1.936435] ohci_hcd 0000:00:06.0: intrstatus 0x00000000
|
|---|
| 187 | [ 1.936435] ohci_hcd 0000:00:06.0: intrenable 0x8000005a MIE RHSC UE RD WDH
|
|---|
| 188 | [ 1.936435] ohci_hcd 0000:00:06.0: hcca frame #0001
|
|---|
| 189 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.a 00000208 POTPGT=0 NPS NDP=8(8)
|
|---|
| 190 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.b 00000000 PPCM=0000 DR=0000
|
|---|
| 191 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.status 00008000 DRWE
|
|---|
| 192 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [0] 0x00000100 PPS
|
|---|
| 193 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [1] 0x00000100 PPS
|
|---|
| 194 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [2] 0x00000100 PPS
|
|---|
| 195 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [3] 0x00000100 PPS
|
|---|
| 196 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [4] 0x00000100 PPS
|
|---|
| 197 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [5] 0x00000100 PPS
|
|---|
| 198 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [6] 0x00000100 PPS
|
|---|
| 199 | [ 1.936435] ohci_hcd 0000:00:06.0: roothub.portstatus [7] 0x00000100 PPS
|
|---|
| 200 | [ 1.936435] usb usb1: default language 0x0409
|
|---|
| 201 | [ 1.936435] usb usb1: udev 1, busnum 1, minor = 0
|
|---|
| 202 | [ 1.936435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
|
|---|
| 203 | [ 1.936435] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|---|
| 204 | [ 1.936435] usb usb1: Product: OHCI Host Controller
|
|---|
| 205 | [ 1.936435] usb usb1: Manufacturer: Linux 2.6.32.9 ohci_hcd
|
|---|
| 206 | [ 1.936435] usb usb1: SerialNumber: 0000:00:06.0
|
|---|
| 207 | [ 1.936435] usb usb1: uevent
|
|---|
| 208 | [ 1.936435] usb usb1: usb_probe_device
|
|---|
| 209 | [ 1.936435] usb usb1: configuration #1 chosen from 1 choice
|
|---|
| 210 | [ 1.936435] usb usb1: adding 1-0:1.0 (config #1, interface 0)
|
|---|
| 211 | [ 1.936435] usb 1-0:1.0: uevent
|
|---|
| 212 | [ 1.936435] hub 1-0:1.0: usb_probe_interface
|
|---|
| 213 | [ 1.936435] hub 1-0:1.0: usb_probe_interface - got id
|
|---|
| 214 | [ 1.936435] hub 1-0:1.0: USB hub found
|
|---|
| 215 | [ 1.936435] hub 1-0:1.0: 8 ports detected
|
|---|
| 216 | [ 1.936435] hub 1-0:1.0: standalone hub
|
|---|
| 217 | [ 1.936435] hub 1-0:1.0: no power switching (usb 1.0)
|
|---|
| 218 | [ 1.936435] hub 1-0:1.0: global over-current protection
|
|---|
| 219 | [ 1.936435] hub 1-0:1.0: power on to power good time: 0ms
|
|---|
| 220 | [ 1.936435] hub 1-0:1.0: local power source is good
|
|---|
| 221 | [ 1.936435] hub 1-0:1.0: no over-current condition exists
|
|---|
| 222 | [ 1.936435] hub 1-0:1.0: trying to enable port power on non-switchable hub
|
|---|
| 223 | [ 1.936435] drivers/usb/core/inode.c: creating file '001'
|
|---|
| 224 | [ 1.936435] uhci_hcd: USB Universal Host Controller Interface driver
|
|---|
| 225 | [ 1.936435] usbcore: registered new interface driver usblp
|
|---|
| 226 | [ 1.936435] Initializing USB Mass Storage driver...
|
|---|
| 227 | [ 1.936435] usbcore: registered new interface driver usb-storage
|
|---|
| 228 | [ 1.936435] USB Mass Storage support registered.
|
|---|
| 229 | [ 1.936435] usbcore: registered new interface driver libusual
|
|---|
| 230 | [ 1.936435] serio: i8042 KBD port at 0x60,0x64 irq 1
|
|---|
| 231 | [ 1.936435] serio: i8042 AUX port at 0x60,0x64 irq 12
|
|---|
| 232 | [ 1.936435] mice: PS/2 mouse device common for all mice
|
|---|
| 233 | [ 1.936435] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
|
|---|
| 234 | [ 1.936435] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
|
|---|
| 235 | [ 1.936435] usbcore: registered new interface driver hiddev
|
|---|
| 236 | [ 1.936435] usbcore: registered new interface driver usbhid
|
|---|
| 237 | [ 1.936435] usbhid: v2.6:USB HID core driver
|
|---|
| 238 | [ 1.936435] TCP cubic registered
|
|---|
| 239 | [ 1.936435] NET: Registered protocol family 17
|
|---|
| 240 | [ 1.946407] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
|
|---|
| 241 | [ 1.946407] EDD information not available.
|
|---|
| 242 | [ 2.036425] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
|
|---|
| 243 | [ 6.166426] ata1.00: qc timeout (cmd 0xec)
|
|---|
| 244 | [ 6.166426] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
|
|---|
| 245 | [ 6.516437] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
|
|---|
| 246 | [ 16.517619] ata1.00: qc timeout (cmd 0xec)
|
|---|
| 247 | [ 16.517619] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
|
|---|
| 248 | [ 16.517619] ata1: limiting SATA link speed to 1.5 Gbps
|
|---|
| 249 | [ 16.866406] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
|
|---|
| 250 | [ 46.866424] ata1.00: qc timeout (cmd 0xec)
|
|---|
| 251 | [ 46.866424] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
|
|---|
| 252 | [ 47.216399] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
|
|---|
| 253 | [ 47.566424] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
|
|---|
| 254 | [ 52.566425] ata2.00: qc timeout (cmd 0xec)
|
|---|
| 255 | [ 52.566425] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
|
|---|
| 256 | [ 52.916425] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
|
|---|
| 257 | [ 62.916398] ata2.00: qc timeout (cmd 0xec)
|
|---|
| 258 | [ 62.916398] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
|
|---|
| 259 | [ 62.916398] ata2: limiting SATA link speed to 1.5 Gbps
|
|---|
| 260 | [ 63.266424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
|
|---|
| 261 | [ 93.266437] ata2.00: qc timeout (cmd 0xec)
|
|---|
| 262 | [ 93.266437] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
|
|---|
| 263 | [ 93.616439] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
|
|---|
| 264 | [ 93.616439] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
|
|---|
| 265 | [ 93.616439] sd 2:0:0:0: [sda] 16384 512-byte logical blocks: (8.38 MB/8.00 MiB)
|
|---|
| 266 | [ 93.616439] sd 2:0:0:0: [sda] Write Protect is off
|
|---|
| 267 | [ 93.616439] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
|
|---|
| 268 | [ 93.616439] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|---|
| 269 | [ 93.616439] sda: sda1
|
|---|
| 270 | [ 93.616439] scsi 2:0:1:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
|
|---|
| 271 | [ 93.616439] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
|
|---|
| 272 | [ 93.616439] Uniform CD-ROM driver Revision: 3.20
|
|---|
| 273 | [ 93.616439] sd 2:0:0:0: [sda] Attached SCSI disk
|
|---|
| 274 | [ 93.616439] sr 2:0:1:0: Attached scsi CD-ROM sr0
|
|---|
| 275 | [ 93.616439] Freeing unused kernel memory: 4392k freed
|
|---|
| 276 | [ 94.036517] UDF-fs: No partition found (1)
|
|---|
| 277 | [ 94.176548] UDF-fs: No partition found (1)
|
|---|
| 278 | [ 94.476507] UDF-fs: No partition found (1)
|
|---|
| 279 | [ 94.636450] UDF-fs: No partition found (1)
|
|---|
| 280 | [ 94.956414] UDF-fs: No partition found (1)
|
|---|
| 281 | [ 95.106424] UDF-fs: No partition found (1)
|
|---|
| 282 | [ 113.476409] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 283 | [ 113.536404] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 284 | [ 113.556405] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 285 | [ 113.576410] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 286 | [ 113.606418] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 287 | [ 113.626913] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 288 | [ 113.646900] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 289 | [ 113.666906] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 290 | [ 113.697170] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 291 | [ 113.716410] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 292 | [ 113.746404] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 293 | [ 113.766403] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 294 | [ 113.786407] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 295 | [ 113.816402] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 296 | [ 113.836403] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 297 | [ 113.856407] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 298 | [ 113.876404] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 299 | [ 113.906890] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 300 | [ 113.926902] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 301 | [ 113.946889] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 302 | [ 113.976405] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 303 | [ 113.996412] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 304 | [ 114.016408] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 305 | [ 114.046407] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 306 | [ 114.066407] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 307 | [ 114.086408] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 308 | [ 114.106416] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 309 | [ 114.136403] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 310 | [ 114.157166] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 311 | [ 114.176407] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 312 | [ 114.206934] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 313 | [ 114.226905] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 314 | [ 114.247178] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 315 | [ 114.276406] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 316 | [ 114.296408] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 317 | [ 114.326405] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 318 | [ 114.346403] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 319 | [ 114.376407] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 320 | [ 114.396407] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|
| 321 | [ 114.416410] CIFS VFS: Error connecting to socket. Aborting operation
|
|---|